In the present work, polymeric composites were prepared for coating floors and swimming pools in dark colors. This was achieved through the use of a polymer coating solution added to fine cement with weight percentage (wt%) values of 5, 10, 15, 20, and 25 to obtain dark-colored (gray) composites. Mortar samples were prepared using the adhesion test. The contact angle and adhesion strength were studied for the prepared samples concerning the effect of changing the weight ratio of additive cement on water absorption. Also, the antibacterial activity was tested for the prepared coatings. The results showed that the contact angle increases with increasing the weight ratios of additive cement, which indicates that the prepared coating is not hydrophilic and water-impermeable. Besides, the adhesion was shown to increase with increasing the weight ratio of cement. According to the antibacterial activity analysis, it was found that the highest efficacy for killing Staphylococcus areus was observed at cement ratios of 5 and 15 wt%, whereas no activity was observed against Escherichia coli.
The purpose of this study is to evaluate the effect of hydrated lime addition methods as filler replacement on fatigue performance of Hot Mix Asphalt (HMA). Three types of addition methods of hydrated lime were introduced namely dry HL on dry aggregate and saturated surface aggregate above 3% and slurry HL on dry aggregate, ordinary Lime stone powder was reduced by three HL percentage (1.0, 2.0 and 3.0 %). The effect of different methods were investigated on the fatigue properties of HMA using, third-point flexural fatigue bending Test. Pneumatic Repeated Load System (PRLS) was carried out to establish the effect of hydrated lime on the fatigue failure criteria and to select the proper hydrated lime application methods on fatigue behavior o
... Show MoreThe settlement evaluation for the jet grouted columns (JGC) in soft soils is a problematic matter, because it is influenced by the number of aspects such as soil type, effect mixture between soil and grouting materials, nozzle energy, jet grouting, water flow rate, rotation and lifting speed. Most methods of design the jet-grouting column based on experience. In this study, a prototype single and group jet grouting models (single, 1*2, and 2*2) with the total length and diameter were (2000 and 150 mm) respectively and clear spacing (3D) has been constructed in soft clay and subjected to vertical axial loads. Furthermore, different theoretical methods have been used for the estimation
Several new derivatives of 1,3,4-oxadiazoles and 1,2,4-triazoles linked to 3,4,5,6-tetrachlorophthalimide moiety were synthesized through following multisteps. The first step involved preparation of 3,4,5,6-tetrachlorophthalimide via reaction of 3,4,5,6-tetrachlorophthalic anhydride with urea at high temperature. Treatment of the resulted imide with ethyl chloroacetate in the second step afforded tetrachlorophthalimidyl ester which inturn was introduced in reaction with hydrazine hydrate in the third step, producing the corresponding acetohydrazide. The synthesized acetohydrazide was introduced in different synthetic paths including treatment with phenyl isothiocyanate or reaction with carbon disulfide in alkaline solution then with hydr
... Show MorePathogenic bacteria from samples of Al-Rystimya municipal wastewater treatment plant(third expansion)were isolated and identified .Samples were collected from the final disposal point at Dyala River. The duration of this study about five months from august up to December 2001 .The study was Focused upon pathogenic bacteria which have bad influency on health especially acute diarrhea which transferred by water. The bacterial species is isolated were: Escherichia coli , Enterobacter aerogenes , Shigella sp , Salmonella sp , Klebsiella sp, Pseudomonus sp, Aeromonus sp, and Vibrio cholera, Clostridium perifringens. Also some of the chemical and biological characteristics of the wastewater like COD, BOD,TSS, and total values were 660 ,450 ,65
... Show MoreThe effect of laser radiation on human aorta, coronary, and pulmonary arteries, and pulmonary veins has been investigated. Xenon-Chloride (eximer), Nitrogen, and Nd-YAG pulsed lasers of wavelengths 308, 337, and 1060 nm respectively were used. Their effects on fresh postmortem tissues, normal and diseased, was studied. The diameter and depth of ablation of the exposed tissues, in air, were measured as a function of many factors related to the type of laser and nature of the tissue. The effect of properties of the applied lasers, such as average power density and deposited energy density, on the exposed tissue surface were studied. The increase of these two parameters cause an increase in the depth and diameter of ablation. However the di
... Show MoreThis article is an endeavour to highlight the relationship between social media and language evolution. It reviews the current theoretical efforts on communication and language change. The descriptive design, which is theoretically based on technological determision, is used. The assumption behind this review is that the social media plays a significant role in language evolution. Moreover, different platforms of social media are characterized by being the easiest and fastest means of communication. It concludes that the current theoretical efforts have paid much attention to the relationship between social media and language evolution. Such efforts have highlighted the fact that social media platforms are awash with a lot of acronyms, cybe
... Show More