Preferred Language
Articles
/
MHhvn58BuRolNscLYuYz
Electrical Properties of AgSb(S<sub>x</sub>Se<sub>1-x</sub>)<sub>2</sub> Thin Films
...Show More Authors

Alloys from AgSb(SxSe1-x)2 with different compositions were prepared using quenching from the melt . This was done by put the appropriate amount of Ag, Sb,S and Se in an evaluated quartz ampoule , sealed and left at oven in temperature 1273 for 5 hours. Thin films with different composition were deposited by pulsed deposition technique PLD onto glass substrates at ambient temperature . This paper concerned on the investigate effect of composition on structural morphology, and electrical properties. The structure and morphology of the prepoared thin films were checked using X–ray diffraction and atomic force microscope. The D.C conductivity of the AgSb(SxSe1-x)2thin films with various x content was measured in the temperature range (298-473)K .It was found the electrical conductivity decreased two order of magnitude with the increase of x content .Two activations energies Ea1, and Ea2estimated from the plot of log conductivity with reciprocal temperature for AgSb(SxSe1-x)2 with different compositions which increased with increasing of x content. The data obtained from Hall effect which are concentration of charge carriers decreased while mobility increased with the increase of x content.

Scopus Crossref
View Publication
Publication Date
Sun Nov 01 2020
Journal Name
Iop Conference Series: Materials Science And Engineering
Dielectric properties and A.C electrical conductivity analysis of (La<sub>2</sub>O<sub>3</sub>)<sub>1-x</sub>(ZnO)<sub>x</sub>
...Show More Authors
Summery<p>The A.C conductivity of three samples of lanthanide oxide : zinc oxide (La<sub>2</sub>O<sub>3</sub>)<sub>1-x</sub>(ZnO)<sub>x</sub> pellets with different zinc oxide content which were sintered 1273 K temperatures were studied using LRC meters in the frequency range of 50–10<sup>6</sup> Hz at temperature of 30 °C. The a.c conductivity, was analyzed depending of the universal power law proposed by Jonsher,. The slope of the relation between logarithm of a.c conductivity and angular frequency represent the s value were in the range (0.44-0.77) which found to increase by increasing of zinc oxide content which coincided with the small po</p> ... Show More
View Publication
Scopus (8)
Crossref (1)
Scopus Crossref
Publication Date
Wed May 01 2024
Journal Name
Journal Of Physics: Conference Series
A study of the Electrical and Dialectical proprieties of S<sub>60-</sub>Se<sub>40-X</sub>-Pb<sub>X</sub>Chalcogenide Compound
...Show More Authors
Abstract<p>In this study, the melting-cooling method was used to prepare the chalcogenide compound S<sub>60</sub>-Se<sub>40-X</sub>-Pb<sub>X</sub>. Four samples were obtained by partial replacement of Selenium with Lead in the weight ratios x = 0, 10, 20, and 30, respectively. The materials were mixed separately, ground, placed in quartz ampoules, and heated to 500 degrees Celsius. After conducting several operations on the samples, their insulating properties were studied, represented by the real dielectric constant and the imaginary dielectric constant, and the electrical conductivity was measured as a function of the frequency. It was found that partial replacement plays an impo</p> ... Show More
View Publication Preview PDF
Scopus (1)
Crossref (1)
Scopus Crossref
Publication Date
Sun Nov 01 2020
Journal Name
Iop Conference Series: Materials Science And Engineering
Effect of Germanium Content on the Optical Constants of Ge<sub>x</sub>S<sub>1-x</sub> Thin Films
...Show More Authors
Abstract<p>In this study the alloys Ge <sub>x</sub>S<sub>1-x</sub> with different Ge content (x=0, 0.1,0.2 and 0.3) wt.% have been successfully prepared by evacuated quartz tube under vacuum pressure (10<sup>−2</sup>Torr), whereas Ge xS<sub>1-x</sub> thin films were prepared by thermal evaporation technique under vacuum (10<sup>−5</sup>Torr) with (x=0,0.1,0.2 and 0.3). The optical properties measurements shows that the optical energy gap decrease from (3.4 to 3 eV) with the increase of x content, the optical constants declare significant variation with x content variation.</p>
View Publication
Scopus (3)
Crossref (4)
Scopus Crossref
Publication Date
Tue May 12 2026
Journal Name
Canadian Metallurgical Quarterly
Investigation of Te <sub>50</sub> Se <sub>50-x</sub> Sn <sub>x</sub> alloys’ structural and electrical characteristics
...Show More Authors

View Publication
Crossref
Publication Date
Mon Jul 01 2019
Journal Name
Journal Of Physics: Conference Series
Effect of aluminum content on the structural, morphology, and electrical properties of Al<sub>1-x</sub>Sb<sub>x</sub>thin films
...Show More Authors
Abstract<p>Bulk AlxSb1-x samples were prepared with different x ratios (0.1, 0.3, 0.5, 0.7 and 0.9) by quenching technique. This was done throughout mixing the aluminum and antimony elements according to the proper atomic weight and put them in an evacuated quartz ampoule which then sealed and heated at 1273 K for five hours and left to cool in air. Thin films of AlxSb1-xwere prepared by using thermal evaporation under vacuum of 10-5 mbar on glass substrates at room temperature with deposition rate (10-15nm/min) at thickness of ∼ 500nm. The structures of AlxSb1-x bulk and thin films have been studied by X–ray diffraction technique. The results showed that all alloys have polycrystalline structures and the p</p> ... Show More
View Publication
Scopus Crossref
Publication Date
Thu Jan 01 2026
Journal Name
Chalcogenide Letters
Structural and Optical Properties of Cu&lt;sub&gt;2&lt;/sub&gt;ZnSn(S&lt;sub&gt;1−x&lt;/sub&gt;Se&lt;sub&gt;x&lt;/sub&gt;)&lt;sub&gt;4&lt;/sub&gt; Nanostructures Thin Film for Photovoltaic Applications
...Show More Authors

Copper zinc tin sulfide selenide, Cu2 ZnSn(S1−x Se x)4 , absorbers are promising earth-abundant and environmentally benign materials for low-cost photovoltaic applications. This study investigates the structural and optical properties of Cu 2 ZnSn(S1−x Se x)4 nanostructured thin films prepared by pulsed laser deposition using melt-quenched targets with selenium compositions x = 0.0–1.0. X-ray diffraction revealed that films with low selenium content remained amorphous, whereas higher selenium incorporation promoted the formation of polycrystalline kesterite–stannite phases with preferred orientations along (112), (200), (220), and (312). The crystallite size increased from 12.3 to 17.9 nm as selenium reached x = 1.0, indicating enha

... Show More
View Publication
Crossref (1)
Crossref
Publication Date
Sun Nov 01 2020
Journal Name
Iop Conference Series: Materials Science And Engineering
Investigation effect of ZnO content on the structural and electrical properties of pulsed laser deposited (NiO)<sub>1-x</sub> (ZnO)<sub>x</sub> thin films
...Show More Authors
Abstract<p>This research is devoted to the effect of investigation of the ZnO content on the structural and electrical properties of (NiO)<sub>1-x</sub> (ZnO)<sub>x</sub> films prepared by pulsed laser precipitation on the glass substrate at room temperature. Thin-film (NiO)<sub>1-x</sub> (ZnO)<sub>x</sub> sediments were deposited with different composition ratios where x = 0, 0.2, 0.4, 0.6 and 1.0 with a thickness of n150nm. The diffraction pattern for X-ray analysis reveals that the structure of the prepared thin films is identical with the cubic phase and hexadecimal stage of x = 0 and 0.1, respectively while the structure is mixed with the remaining x </p> ... Show More
View Publication
Scopus (1)
Crossref (1)
Scopus Crossref
Publication Date
Sat May 01 2021
Journal Name
Journal Of Physics: Conference Series
The substitutions of Strontium by yttrium and their effects on Bi<sub>2</sub>Sr<sub>2</sub>-<sub>x</sub>Y<sub>x</sub>Ca<sub>2</sub>Cu<sub>3</sub>O<sub>10</sub>+<sub>δ</sub> superconducting compound
...Show More Authors
Abstract<p>Superconducting compound Bi<sub>2</sub>Sr2-<sub>x</sub>Y<sub>x</sub>Ca<sub>2</sub>Cu<sub>3</sub>O<sub>10+δ</sub> were Synthesized by method of solid state reaction, at 1033 K for 160 hours temperature of the sintering at normal atmospheric pressure where substitutions Yttrium oxide with Strontium. When Y2O3 concentration (0.0, 0.1, 0.2, 0.3, 0.4 and 0.5). All specimens of Bi<sub>2</sub>Sr<sub>2</sub>Ca<sub>2</sub>Cu<sub>3</sub>O<sub>10+δ</sub> superconducting compounds were examined. The resistivity of electrical was checked by the four point probe technique, It was found th</p> ... Show More
View Publication
Scopus (6)
Crossref (6)
Scopus Crossref
Publication Date
Tue Oct 01 2024
Journal Name
Journal Of Physics: Conference Series
An investigation into the implications of partial substitution of selenium with lead on the thermal properties for S<sub>60</sub>Se<sub>40-X</sub>Pb<sub>X</sub> Chalcogenide Compound
...Show More Authors
Abstract<p>This study includes the manufacture of four ternary alloys represented S<sub>60</sub>Se<sub>40-X</sub>Pb<sub>X</sub> with weight ratios x = 0, 10, 20, and 30 by the melting point method. The components of each alloy were mixed separately, then placed in quartz ampoules and vacuumed out with a vacuum of roger that 10<sup>−4</sup> Torr. The ampule was heated in two stages to avoid sudden dissipation and precipitation of selenium on the inner mass of the quartz tube. The ampoule was gradually heated and kept at 450°C for approximately 4 hours followed by 950°C for 10 hours.at a rate of 10 degrees Celsius, the temperature of the electric furnace</p> ... Show More
View Publication Preview PDF
Scopus Crossref
Publication Date
Fri Feb 01 2019
Journal Name
Journal Of Physics: Conference Series
Manufacturing and studying the effect of partial substitution on the properties of the compound Bi<sub>2-x</sub> Ag<sub>x</sub>Sr<sub>1.9</sub>Ba<sub>0.1</sub>Ca<sub>2</sub>Cu<sub>3</sub>O<sub>10+δ</sub> superconductors.
...Show More Authors

View Publication
Scopus (4)
Crossref (3)
Scopus Clarivate Crossref