In this study, the effect of glass fiber reinforced polymer (GFRP) section and compressive strength of concrete in composite beams under static and low velocity impact loads was examined. Modeling was performed and the obtained results were compared with the test results and their compatibility was evaluated. Experimental tests of four composite beams were carried out, where two of them are control specimen with 20 MPa compressive strength of concrete deck slab and 50 MPa for other. Bending characteristics were affected by the strength of concrete under impact loading case, as it increased maximum impact force and damping time at a ratio of 59% and reduced the damping ratio by 47% compared to the reference hybrid beam. Under static loading, there was an increase in all the parameters, including the maximum load, ductility, and stiffness. Mid-span deflection was reduced by 25% under static and impact loads. A finite element analysis was performed by using the ABAQUS software. The midspan deflection value was greater than the experimental values by 6% and 3% for impact and static loads, respectively, and all other results showed a high rate of agreement with the obtained test results. The agreement between the numerical and experimental results indicates that the developed numerical model is capable of analyzing the impact and static behavior of such hybrid GFRP-concrete system. Doi: 10.28991/cej-2020-03091608 Full Text: PDF
A model using the artificial neural networks and genetic algorithm technique is developed for obtaining optimum dimensions of the foundation length and protections of small hydraulic structures. The procedure involves optimizing an objective function comprising a weighted summation of the state variables. The decision variables considered in the optimization are the upstream and downstream cutoffs lengths and their angles of inclination, the foundation length, and the length of the downstream soil protection. These were obtained for a given maximum difference in head, depth of impervious layer and degree of anisotropy. The optimization carried out is subjected to constraints that ensure a safe structure aga
... Show MorePumpkin waste powder was used as a coloring and strengthening filler in epoxy to prepare a natural gelcoat . The Pumpkin powder was mixed with different weight ratios (1, 2, 3, 4, 5, 6, 7, and 8%) to the epoxy matrix to select the best value of powder addition. The effect of the pumpkin particle size on the mechanical properties (impact, flexural, hardness, and wear loss) using two different sizes (2.5 and 1.25 microns) was studied. The impact strength increased from (10.09 KJ/ m2) for neat epoxy to (14.79 KJ/ m2) for epoxy with 1% of micron pumpkin fibers ( MPF) with particle size 2.5 micrometer and (14.21 KJ/ m2) for epoxy with 4% (1.25 MPF), flexural strength increased from (41.94 MPa) for n
... Show MoreThis research aims at identifying the level of Moral Awareness and the level of Authoritarian Parenting Style of Secondary School Students in Baghdad. Additionally, the study seeks to identify the significant difference between these two variables in term of gender (male-female), as well as the correlation between Moral Awareness and Authoritarian Parenting Style. To do this, the researchers have adopted the scale of moral awareness prepared by the (Assl 2014), which the number of its items was finalized of (28) items. As for the Authoritarian Parenting Style scale, the researcher designed a questionnaire of (22) items as the number of its finalized form. The two instruments were applied on a sample of (140) male and female Students who
... Show MoreThe expression of the Proprotein Convertase Subtilisin/Kexin Type 9 gene (PCSK9) is inextricably related to lipid levels and a risk of atherosclerotic coronary artery disease (ASCAD). The present study aims to measure the quantity of PCSK9 gene expression and the effect of methylation on its expression level taking part in the pathogenesis of acute coronary artery disorder.
A current study included 150 subjects from the Iraqi population, 100 ASCAD patients and 50 healthy controls. The concentration of PCSK9 in each serum sample was determined by the ELISA technique, the expression levels of the PCSK9 gene in whole blood were estimated by RT-qPCR – Quantitative Reverse Transcription PCR method, and DNA
... Show MoreSome microorganisms, including fungi, are characterized by their removal efficiency and reducing the concentrations of heavy metals such as Pb and Cr from industrial water. The present study aims to estimate the efficiency of Penicillium digitatum (Pers.) Sacc. as a low-cost biosorbent in reducing Pb and Cr from industrial water with optimum biosorption conditions (acidity of 1.5 , 4, and 5; temperature of 30 °C). The Fourier transform infrared spectroscopy (FTIR) analysis was also used for determining the roles of the functional groups in this biosorbent. The results indicated that the highest P. digitatum efficiency values for reducing the levels of Pb and Cr were 84% and 70% , respectively, at pH of 5 after 24 h.
... Show MoreIn the present work, Uranium (238U), Thorium (232Th) and Potassium (40K) specific activity concentration in (Bq/kg) was measured in five different types for wheat flours that are available in the Iraqi markets. The gamma spectrometry method with an NaI (Tl) detector has been used for radiometric measurements. Calculations of radium equivalent activity, annual effective dose equivalent, external hazard index (Hex), internal hazard index (Hin), representing gamma index and gamma dose rate in all flour samples were 17.98132 Bq/kg, 0.0100334, 0.04502, 0.04857, 0.06872, 0.125883 and 8.181244 respectively. It is found that the average of specific activity concentration of wheat flour sam
... Show MoreChronic kidney disease (CKD) is described as an abnormalities of renal function, existing for a long period of time. By reason of the early grades of Chronic kidney disease can be experiences no symptoms, its premature identification is strenuous. initial stage CRD can cause various complications, such as anemia, matabolyic disorders of bone mineral. The study was done to assess the effect the chronic renal disease stage on the Osteoprotegerin, 1,25 dihydroxyvitamin D, Obestatin levels and some biochemical parameters in patients not undertaken dialysis therapy. In this case-control study fifty-five patients with Kidney failure and fourty healthy people were examined. Circulating concentrations of Osteoprotegerin, 1,25 dihydroxyvitamin D
... Show MoreEighteen new cyclic imides (maleimides) conncted to benzothiazole moiety through sulfonamide group were synthesized via multistep synthesis.The first step involved preparation of two maleamic acids N-phenylmaleamic acid and N-benzylmaleamic acid via reaction of maleic anhydride with aniline or benzyl amine.Dehydration of the prepared amic acids by treatment with acetic anhydride and anhydrous sodium acetate in the second step afforded N-phenylmaleimide and N- benzyl maleimide which in turn were treated with chlorosulfonic acid in the third step to afford 4-(N-maleimidyl) phenyl sulfonyl chloride and 4-(N-maleimidyl) benzyl sulfonyl chloride respectively.In the Fourth step of this work each one of the two prepared maleimidyl sulfonyl chlorid
... Show MoreEthanolic extracts of Thyme (Thymbra spicata) were tested for their inhibitory action on Paenibacillus larvae the causative agent of American foul brood with different concentration by using disc assay and mixed with culture media . Results showd that 3000mg / disc and 3000 mg / ml was the effective concentroation for the both methods .Thymol was isolated by using TLC technique . The effective concentration of thymol on growth of bacteria was 1000 mg / disc . Thymol and crude extracts of thyme 3000 mg / ml were tested on infected hives by mixed with sugar solution . The symptoms of AFB disease was full disappearance within 21 , 27 days after treatment with thymol and thyme
... Show MoreLinear motor offers several features in many applications that require linear motion. Nevertheless, the presence of cogging force can deteriorate the thrust of a permanent magnet linear motor. Using several methodologies, a design of synchronous single sided linear iron-core motor was proposed. According to exact formulas with surface-mounted magnets and concentrated winding specification, which are relying on geometrical parameters. Two-dimensional performance analysis of the designed model and its multi-objective optimization were accomplished as a method to reduce the motor cogging force using MAXWELL ANSYS. The optimum model design results showed that the maximum force ripple was approximatrly reduced by 81.24%compared to the origina
... Show More