The present study aims at knowing the effect of Woods' model in correcting the geographical missUnderstanding for first stage students. In order to realize the objective of this study, the researcher used an experimental design with partial adjustment which is experimental group with another control group. The research is confined to the first four chapters of the boon of the principles of geography to be studied for the first stage in the academic year (2010/2011) in Iraq. The researcher chooses purposely the chose a staple form the first stage in Hay Al-Jama'a School for boys, in order to apply the experiment. The total number of the sample was (60) students who were distributed randomly as (30)per group. The researcher matched two groups in terms of ( geography diagonal test, intelligence level, Age, parent education). Then, the researcher tried to adjust a series of variables that might affect the variable. The researcher conducted the research on two stages; diagonal stage: in which he tried to analyze the book matter under the experiment and the subjects of geography which were taught to the groups of students in previous years (fifth and sixth primary stages). The repeated concepts were derived in the first stage and the previous stages. They were (20) concepts on the basis of which a diagonal test was adopted the type of multiple choice to measure the level of understanding in the cognitive field of Bloom's classification. The number of items attained (20) items each item one. On that basis the test of the items of wrong understanding. If the error rate exceeded (%34) above for the sample. The validity and constancy was verified and he discriminatory power of the items and the difficulty coefficient. It turned out after analysis that there are (16)concepts of wrong understanding for the second stage, correction. The procedures of this was applied on a diagonal sample which had been already subdivided into two groups; the experimental group which is taught according to Wood's method and the control group which is taught according to traditional methods. After ending the study of the four chapters of the Geography book, and analyzing the data statistically by using Chi square, it was found that the excel of the experimental group which is taught according to Wood's model over the control group which is taught according to traditional methods. In the light of which the following was found: 1. The effectiveness of Wood's model in correcting the wrong concepts more than the traditional ones. 2. The conventional methods have helped only in a limited way to correct some of the wrong concepts for the first stage students. The researcher has come up with the following recommendations: 1. To use Woods' model in teaching the general principles of geography for its effectiveness in correcting the wrong concepts. 2. The necessity that teachers of geography to have knowledge in the teaching models like Woods' Model. 3. Familiarize geography teachers with the methods of diagnosing the wrong conception for students to correct them In the light of the results, the researcher comes up with suggestions like conducting studies in the effect of: 1. Woods' Model on other stages and materials. 2. Woods' Model in variables affiliated to like innovative thinking, motivation and acquisition of the scientific skills. 3. A comparison study between Woods' model and other models not depending on the constructive philosophy.
Abstract
Theoretical and experimental methodologies were assessed to test curved beam made of layered composite material. The maximum stress and maximum deflection were computed for each layer and the effect of radius of curvature and curve shape on them. Because of the increase of the use of composite materials in aircraft structures and the renewed interest in these types of problems, the presented theoretical assessment was made using three different approaches: curved beam theory and an approximate 2D strength of material equations and finite element method (FEM) analysis by ANSYS 14.5 program for twelve cases of multi-layered cylindrical shell panel differs in fibe
... Show MoreThe way used to estimate the fuzzy reliability differs according to the nature of the information of failure time which has been dealt in this research.The information of failure times has no probable distribution to explain it , in addition it has fuzzy quality.The research includes fuzzy reliability estimation of three periods ,the first one from 1986 to 2013,the second one from 2013 to 2033 while the third one from 2033 to 2066 .Four failure time have been chosen to identify the membership function of fuzzy trapezoid represented in the pervious years after taking in consideration the estimation of most researchers, proffional geologists and the technician who is incharge of maintaining of Mosul Dam project. B
... Show More
This article introduces a numerical study on heat exchange and corrosion coefficients of Zinc–water nanofluid stream in a circular tube fitted with swirl generator utilizing CFD emulation. Different forms of swirl generator which have the following properties of plain twisted tape (PTT) and baffle wings twisted tape (BTT) embeds with various ratio of twisting (y = 2.93, 3.91 and 4.89), baffle inclination angles (β = 0°, - 30° and 30) joined with 1%, 1.5% and 2% volume fraction of ZnO nanofluid were utilized for simulation. The results demonstrated that the heat and friction coefficients conducted by these two forms of vortex generator raised with Reynolds number, twist ratio and baffle inclination angles decreases. Likewise, t
... Show More
Free water surface constructed wetlands (FSCWs) can be used to complement conventional waste water treatment but removal efficiencies are often limited by a high ratio of water volume to biofilm surface area (i.e. high water depth). Floating treatment wetlands (FTWs) consist of floating matrices which can enhance the surface area available for the development of fixed microbial biofilms and provide a platform for plant growth (which can remove pollutants by uptake). In this study the potential of FTWs for ammoniacal nitrogen (AN) removal was evaluated using experimental mesocosms operated under steady-state flow conditions with ten different treatments (two water depths, two levels of FTW mat coverage, two different plant densities and
... Show More
(11)
(12)
This research aims to study the methods of reduction of dimensions that overcome the problem curse of dimensionality when traditional methods fail to provide a good estimation of the parameters So this problem must be dealt with directly . Two methods were used to solve the problem of high dimensional data, The first method is the non-classical method Slice inverse regression ( SIR ) method and the proposed weight standard Sir (WSIR) method and principal components (PCA) which is the general method used in reducing dimensions, (SIR ) and (PCA) is based on the work of linear combinations of a subset of the original explanatory variables, which may suffer from the problem of heterogeneity and the problem of linear
... Show More
The present study aims to explore the effectiveness of a proposed study unit based on the funds of knowledge theory in developing the attitudes towards cultural identity and the proposed study unit. In order to achieve the goal of the study, the two researchers followed the quasi-experimental approach, where the study sample consisted of (28) female students of the fifth-grade at Al-Jeelah Basic Education School, Al-Dakhiliyah Governorate in the Sultanate of Oman. The data were collected by two scales: the first is a scale of attitudes towards cultural identity consisting of (26) items. The second was a scale of attitudes towards the proposed study unit, which consisted of (24) items. The results of the study revealed that the effect of
... Show MoreIn this research, damping properties for composite materials were evaluated using logarithmic decrement method to study the effect of reinforcements on the damping ratio of the epoxy matrix. Three stages of composites were prepared in this research. The first stage included preparing binary blends of epoxy (EP) and different weight percentages of polysulfide rubber (PSR) (0%, 2.5%, 5%, 7.5% and 10%). It was found that the weight percentage 5% of polysulfide was the best percentage, which gives the best mechanical properties for the blend matrix. The advantage of this blend matrix is that; it mediates between the brittle properties of epoxy and the flexible properties of a blend matrix with the highest percentage of PSR. The second stage
... Show MoreIn this research the natural frequency of a cracked simple supported beam (the crack is in many places and in different depths) is investigated analytically, experimentally and numerically by ANSYS program, and the results are compared. The beam is made of iron with dimensions of L*W*H= (0.84*0.02* 0.02m), and density = 7680kg/m3, E=200Gpa. A comparison made between analytical results from ANSYS with experimental results, where the biggest error percentage is about (7.2 %) in crack position (42 cm) and (6 mm) depth. Between Rayleigh method with experimental results the biggest error percentage is about (6.4 %) for the same crack position and depth. From the error percentages it could be concluded that the Rayleigh method gives
... Show MoreIn this article, the solvability of some proposal types of the multi-fractional integro-partial differential system has been discussed in details by using the concept of abstract Cauchy problem and certain semigroup operators and some necessary and sufficient conditions.
In the present work, the feasibility of formation near-ideal ohmic behavior of In/n-Si contact efficiently by 300 s duration Nd:YAG pulsed laser processing has been recognized. Several laser pulses energy densities have been used, and the optimal energy density that gives best results is obtained. Topography of the irradiated region was extensively discussed and supported with micrographic illustrations to determine the surface condition that can play the important role in the ohmic contact quality. I-V characteristics in the forward and reverse bias and barrier height measurements have been studied for different irradiated samples to determine the laser energy density that gives best ohmic behavior. Comparing the current results with
... Show More