A winglet is devices attached at the wing tips, used to improve aircraft wing efficiency by reduction influence wing tips vortices and induct drag, increasing lift force at the wing tips and effective aspect ratio without adding greatly to the structural stress and weight in the wing structure. This paper is presented three-dimensional numerical analysis to proposed modification swept back wing by adding Raked winglets devices at the main wing tips belong the two seat trainer aircraft type Aermacchi Siai S211 by using Fluent ANSYS 13 software. CFD numerical analysis process was performed at the same flight boundary conditions indifferent wing angle of attacks with constant air flow velocity V∞ =50 (m/sec), ambient pressure Po=101325 (Pa), ambient temperature To=288.14 (K), and at air density ρo=1.225 (kg\m3) to both proposed wing model and the main aircraft wing model. The results are shown an improvement in aerodynamic parameters including increment lift coefficient to (0.22%-5.95%), reduction drag coefficient to (0.34% - 3.60%), increment wing load efficiency ratio to (2.62% - 7.30%), reduction induct drag coefficient CDi to (7.65% - 13.11%) compared with the main aircraft wing model and achieved an improvement in aircraft flight maneuver abilities and stability controls especially during descent, approach, landing and takeoff with lower speed with shortage runway.
of the research is one of the poetic purposes that expresses the philosophy of the intellectual poet who experienced life and learned the tendencies and the gulf of the human soul and the fact that an intellectual attitude towards them, intensified within the poems do not need to be frequently narrated and elaborated, but based on the few words in the rich meanings and expressed the point of view he wanted to convey to the recipient without taking the position of disorientation and retreat to himself expressing his rejection of this reality, but faced this reality different manifestations and reflections and the conditions of human beings in it detailed His opinion is constructive criticism, and accurate observations reveal the culture o
... Show MoreAbstract
In the present study, composites were prepared by Hand lay-up molding. The composites constituents were epoxy resin as a matrix, 6% volume fractions of glass fibers (G.F) as reinforcement and 3%, 6% volume fractions of preparation natural material (Rice Husk Ash, Carrot Powder, and Sawdust) as filler. Studied the erosion wear behavior and coating by natural wastes (Rice Husk Ash) with epoxy resin after erosion. The results showed the non – reinforced epoxy have lower resistance erosion than natural based material composites and the specimen (Epoxy+6%glass fiber+6%RHA) has higher resistance erosion than composites reinforced with carrot powder and sawdust at 30cm , angle 60
... Show MoreAdvertisement is one of the Media most efficient persuasive communicative activities designed to marketing different ideas and products with the aim of influencing consumers' perception of goods and services. The present study sheds light on the most prominent rhetorical devices that constitute the persuasive structure of the Hebrew advertisements published in various media outlet. The study is conducted by means of analyzing the linguistic structure of the advertising texts and according to the analytic and descriptive approach to know the characteristics and the functions of the oratorical devices used in the advertising industry. The research elucidates that most of the advertisements are written in slang language, and this is due to th
... Show MoreThis research included the hadiths in which the urge to fast the month of the month, or the beginning of the month, and followed the inductive approach to collecting hadiths, and the critical approach in their studies, and in the weighting of the right from the faces contained in it, and one of the most important results of the research is the agreement of the words of the people On the whiteness, whether it is a little or a lot, the rush of the month will be the first three nights, where the moon white is a little, and they also agreed that the middle three are called the white days, and that the release of the rage on them for the whiteness of its nights, where the moon is complete, and the Prophet has been proven. May God bless him an
... Show MoreAtenolol was used with ammonium molybdate to prove the efficiency, reliability and repeatability of the long distance chasing photometer (NAG-ADF-300-2) using continuous flow injection analysis. The method is based on reaction between atenolol and ammonium molybdate in an aqueous medium to obtain a dark brown precipitate. Optimum parameters was studied to increase the sensitivity for developed method. A linear range for calibration graph was 0.1-3.5 mmol/L for cell A and 0.3-3.5 mmol/L for cell B, and LOD 133.1680 ng/100 µL and 532.6720 ng/100 µL for cell A and cell B respectively with correlation coefficient (r) 0.9910 for cell A and 0.9901 for cell B, RSD% was lower than 1%, (n=8) for the determination of ate
... Show MoreLet R be a 2-torision free prime ring and ?, ?? Aut(R). Furthermore, G: R×R?R is a symmetric generalized (?, ?)-Biderivation associated with a nonzero (?, ?)-Biderivation D. In this paper some certain identities are presented satisfying by the traces of G and D on an ideal of R which forces R to be commutative
An investigation was conducted effect of addition co- solvent on solvent extraction process for two types of a lubricating oil fraction (spindle) and (SAE-30) obtained from vacuum distillation unit of lube oil plant of Daura Refinery. In this study two types of co-solvents ( formamide and N-methyl, 2, pyrrolidone) were blended with furfural to extract aromatic hydrocarbons which are the undesirable materials in raw lubricating oil, in order to improve the viscosity index, viscosity and yield of produced lubricating oil. The studied operating condition are extraction temperature range from 70 to 110 °C for formamide and 80 to 120 °C for N-methyl, 2, pyrrolidone, solvent to oil ratio range from 1:1 to 2:1 (wt./wt.) for furfural with form
... Show MoreSelf- curing is the potential of lightweight aggregate to absorption great amount of water thru mixing which prominently can moves to the paste during hydration process. Self- curing empowers a water to be distributes more evenly act out the cross section. Whereas, the external curing water is only able to penetrate several millimetres into concrete with low water cement ratio. Brick dust accumulates in the demolish site creates serious environmental contamination. This study investigates the effect of brick dust recovered from construction site on the Properties of mortar cured in three curing conditions. Mortar in this study produced using BD as cement additive with (2, 4, 6, and 8) % by weight of cement. BD was used a
... Show Morethe contemporary Arab scholars deal with semiotics as an approach that helps them understand the texts, its meaning, and its structural functionalism . that’s why every now and then we find some
studies and researches using semiotics as an approach in study and comparatives, some of them even used the semiotic approach in analyzing old and new texts, while others think that semiotic holds and important place in critical approaches .
even though some of them considers semiotic just a trend of fashion this really didn’t lessen the value of semiotic as a scientific and procedural approach in literary and media studies as well as in analyzing literary and journalistic texts. for this reason it is considered as an important approa
This work addressed the assignment problem (AP) based on fuzzy costs, where the objective, in this study, is to minimize the cost. A triangular, or trapezoidal, fuzzy numbers were assigned for each fuzzy cost. In addition, the assignment models were applied on linguistic variables which were initially converted to quantitative fuzzy data by using the Yager’sorankingi method. The paper results have showed that the quantitative date have a considerable effect when considered in fuzzy-mathematic models.