Preferred Language
Articles
/
jcois-825
The importance of logic in the study of Islamic sciences
...Show More Authors

Logic is one of the sciences that have receded and regressed in the field of Islamic sciences. This regression is the result of several factors, the most important of which are:

1- The Aristotelian logic, concerned with the seemingly essential shape and the underlying truth in the text, which has been translated into Arabic, is no longer able to keep pace with scientific revelations and epistemological spaces of our time.
2- The existence of logic in the curricula of Islamic studies was not subject to a study linking logic and Islamic sciences. Therefore, we find that the student studies logic as if it were a strange subject that has nothing to do with the subjects of Islamic studies and even Islamic philosophy.
3- Logic is a scientific, intellectual subject whose study leads to the development of mental abilities, and therefore it must be taken care of and given special attention. The development of his vocabulary and the use of this in this regard, including logical studies in the world. Because of the scientific logic, its drought and the lack of practical examples of its vocabulary, all of this pushed students to aversion to his studies.
In this research, the researcher tries to open the door to looking at the logic curriculum that is taught in the colleges of Islamic sciences, and this study constituted a sincere invitation to reconsider the vocabulary and logical subject matter that has not changed for hundreds of years since the material was translated in ancient times and remained the same and nothing happened Development by institutions concerned with its study and teaching, and criticism of logic in this research is intended to develop logic by discussing the problems that have been raised about logic.
In the first topic, the definition and its problems were highlighted. Can logic, by definition, create or control knowledge? The researcher discussed some of the criticisms that tried to cancel logic and proved that logic is not from religious sciences but rather from secular sciences like mathematics and physics, and there is nothing wrong with benefiting from it in the service of religion and Islamic sciences.
In the second topic, the researcher tried to review the vocabulary of the curriculum in order to reach the conclusion that the complexity and rigorous normality were a reason for the aversion to studies of Islamic sciences and their distancing from logic.
The researcher quickly listed the vocabulary of the current approach to logic. Through this digression, the researcher tried to stop at some cases that confirm that logic was made by the human mind and is subject to error, addition, deletion and change.
In the third topic, the researcher presented a vision for developing logic by proposing some changes in the current curriculum and focusing on the topic of significance and benefiting from contemporary studies in language and interpretation and studying mental reasoning and developing students ’intellectual capabilities.
In conclusion, the researcher presented some ideas that he reached to study as results that can be enriched and expanded to develop the logic approach. And the God of the intent behind .

View Publication Preview PDF
Quick Preview PDF
Publication Date
Tue Dec 01 2020
Journal Name
Journal Of Engineering
Simulation and Analysis of the OFDM Transceiver Based Commutation System
...Show More Authors

As a result of the increase in wireless applications, this led to a spectrum problem, which was often a significant restriction. However, a wide bandwidth (more than two-thirds of the available) remains wasted due to inappropriate usage. As a consequence, the quality of the service of the system was impacted. This problem was resolved by using cognitive radio that provides opportunistic sharing or utilization of the spectrum. This paper analyzes the performance of the cognitive radio spectrum sensing algorithm for the energy detector, which implemented by using a MATLAB Mfile version (2018b). The signal to noise ratio SNR vs. Pd probability of detection for OFDM and SNR vs. BER with CP cyclic prefix with energy dete

... Show More
View Publication Preview PDF
Crossref (3)
Crossref
Publication Date
Sat Jul 01 2017
Journal Name
Energy Procedia
The effect of sunlight on medium density polyethylene Water pipes
...Show More Authors

View Publication
Scopus (35)
Crossref (27)
Scopus Clarivate Crossref
Publication Date
Tue Jun 18 2024
Journal Name
Al-bahir Journal For Engineering And Pure Sciences
Organization of Traffic on the Main Streets Microcontroller Traffic Lights
...Show More Authors

View Publication
Scopus Crossref
Publication Date
Tue Jan 01 2019
Journal Name
Africa Health Research Organization
The anti- Leishmaniasis activity of green synthesis silver oxide nanoparticles
...Show More Authors

View Publication
Scopus (13)
Crossref (6)
Scopus Crossref
Publication Date
Mon Aug 01 2011
Journal Name
Journal Of Engineering
EXPERIMENTAL OBSERVATIONS ON THE BEHAVIOR OF A PILED RAFT FOUNDATION
...Show More Authors

The piled raft is a geotechnical composite construction consisting of three elements: piles, raft and soil.
In the design of piled rafts, the load shared between the piles and the raft, and the piles are used up to a
load level that can be of the same order of magnitude as the bearing capacity of a comparable single
pile or even greater. Therefore, the piled raft foundation allows reduction of settlements in a very
economic way as compared to traditional foundation concepts.
This paper presents experimental study to investigate the behavior of piled raft system in sandy
soil. A small scale “prototype” model was tested in a sand box with load applied to the system through
a compression machine. The settlement was

... Show More
View Publication Preview PDF
Crossref (6)
Crossref
Publication Date
Wed Jul 01 2015
Journal Name
Journal Of Engineering
Enhancing the Performance of Piezoelectric Energy Harvesters Using Permanent Magnets
...Show More Authors

A cantilevered piezoelectric beam with a tip mass at its free end is a common energy harvester configuration. This paper introduces a new principle of designing such a harvester which increases the generated voltage without changing the natural frequency of the harvester: The attraction force between two permanent magnets is used to add stiffness to the system. This magnetic stiffening counters the effect of the tip mass on the natural frequency. Three setups incorporating piezoelectric bimorph cantilevers of the same type in different mechanical configurations are compared theoretically and experimentally to investigate the feasibility of this principle. Theoretical and experimental results show that magnetically stiffe

... Show More
View Publication Preview PDF
Publication Date
Sat Jul 22 2023
Journal Name
Journal Of Engineering
Surface Free Energy for the Evaluation of Asphalt Binder Stripping
...Show More Authors

Stripping is one of the major distresses within asphalt concrete pavements caused due to penetration of water within the interface of asphalt-aggregate matrix. In this work, one grade of asphalt cement (40-50) was mixed with variable percentages of three types of additives (fly ash, fumed silica, and phosphogypsum) to obtained an modified asphalt cement to resist the effect of stripping phenomena .The specimens have been tested for physical properties according to AASHTO. The surface free energy has been measured by using two methods namely, the wilhelmy technique and the Sessile drop method according to NCHRP-104
procedures. Samples of asphalt concrete using different asphalt cement and modified asphalt cement percentages(4.1,4.6 an

... Show More
View Publication Preview PDF
Crossref
Publication Date
Sun Sep 30 2012
Journal Name
Iraqi Journal Of Chemical And Petroleum Engineering
The Control of Non Isothermal CSTR Using Different Controller Strategies
...Show More Authors

In all process industries, the process variables like flow, pressure, level, concentration
and temperature are the main parameters that need to be controlled in both set point
and load changes.
A control system of propylene glycol production in a non isothermal (CSTR) was
developed in this work where the dynamic and control system based on basic mass
and energy balance were carried out.
Inlet concentration and temperature are the two disturbances, while the inlet
volumetric flow rate and the coolant temperature are the two manipulations. The
objective is to maintain constant temperature and concentration within the CSTR.
A dynamic model for non isothermal CSTR is described by a first order plus dead
time (FO

... Show More
View Publication Preview PDF
Publication Date
Tue Feb 14 2023
Journal Name
Journal Of Biomimetics, Biomaterials And Biomedical Engineering
Optimizing the Surface Properties of Zirconium Implants with Germanium Coating
...Show More Authors

Background: zirconium (Zr) implants are known for having an aesthetically pleasing tooth-like colour Unlike the grey cervical collar that develops over time when titanium (Ti) implants are used in thin gingival biotypes. However, the surface qualities of Zr implants can be further improved. This present study examined using thermal vapour deposition (TVD) to coat Zr implants with germanium (Ge) to improve its physical and chemical characteristics and enhance soft and hard tissue responses. Materials and methods: Zr discs were divided into two groups; the uncoated (control) group was only grit-blasted with alumina particles while the coated (experimental) group was grit-blasted then coated with Ge via TVD. Field emission scanning ele

... Show More
View Publication
Scopus (3)
Crossref (1)
Scopus Clarivate Crossref
Publication Date
Tue Nov 01 2022
Journal Name
Journal Of Engineering
Flow Over the Spillway of AlAdhiam Dam Under Gated Condition
...Show More Authors

The AlAdhaim Dam is located 133 kilometers northeast of Baghdad. It is a multipurpose dam and joints the Iraqi dam system in 2000. It has a storage capacity of 1.5 billion m3. The dam has an ogee spillway with a length of 562 m, a crest level of 131.5 m.a.m.s.l. and a maximum discharge capacity of 1150 m3/s at its maximum storage height of 143 m.a.m.s.l. This research aimed to investigate the hydrodynamics performance of the spillway and the stilling basin of AlAdhiam Dam by using numerical simulation models under gated situations. It was suggested to modify the dam capacity by increasing the dam's storage capacity by installing gates on the crest of the dam spillway. The FLUENT program was used to

... Show More
View Publication Preview PDF
Crossref (1)
Crossref