The issue of dignity is one of the topics that do not pass as long as the earths and the heavens remain; Because the earth is not devoid of the righteous, the believers, the saints, and the pious, and these do not cease from them aid, dignity, insight, or good vision, and from here the authorship in this section was continuous; Because the people’s need for it is confirmed as time progresses, and in that, Ibn Taymiyyah says in the sum of his fatwas, “And from what it should be known is that dignities may be according to the man’s need, so if the weak needs them Faith or the needy, he is given from it what strengthens his faith and fulfills his needs, and he who is more complete is the guardianship of God than him. He is independent of that, and the like of that does not come to him because of his high rank and his indispensability of it, not because of the lack of his mandate; and for this reason it was These matters are more among the Taabi’een than they are among the Companions, in contrast to the one who performs the supernatural at his hands due to the guidance of creation and their need. These are the greatest in degree.”
The need for it and its frequent incidence led to a large number of authors in it, so Muhammad bin Ziyad, known as Ibn Al-Arabi (d. 231 AH) wrote “Karamat Al-Awliyaa”, and Ibn Abi Al-Dunya (d. 281 AH) wrote his book: “The Guardians”, and Al-Hafiz Abu Ahmad Al-Ghassal Qadi Isbahan (d. 349 AH) wrote a book called: “Karamat al-Awliya’” and Ibn Abi Zayd al-Qayrawani (386 AH) who called it “Ithbat Karamat al-Awliya’” and Ibn Futais (d. Al-Khalal al-Baghdadi (d. 439 AH) called it: “Karamat al-Awliya’” while al-Saqli al-Maliki (d. 380 AH) called it: “Karamat of the saints and obedient companions and followers.” Ibn Shaq al-Layl (d. 445 AH) called his book: “The Nobles and Proofs of the Righteous And Abu al-Ma’ali al-Baghdadi called his work: “Karamat al-Awliya’.” Ibn Sayyid al-Nas (d. 734 AH) wrote a book called: “The Sublime Maqamat fi al-Karamat al-Jaliya.” And Muhammad bin Ahmad al-Barulsi al-Ansari (d. after 1096 AH) wrote a work on that with the title: “ The clear verses confirm the dignity of the saints in life and after death.” Al-Shehab Ahmed bin Al-Hassan Al-Karimi Al-Gawhari Al-Shafi’i Al-Azhari (d. D. 1305 AH) A Treatise on the Honorable Mentions of the Saints, and Sheikh Yusuf Al-Nabhani (d. 1350 AH) authored “Al-Jami’ L’honoring Honorable Mentions.”
The large number of writings on these miracles and the uninterrupted nature of miracles was the great motive for researching them, and finding out the doctrines of scholars regarding them.
In this research, I dealt with the study of dignity and its provisions in the Islamic faith, and it included three topics. The first topic dealt with its definition and conditions. Its occurrence and the ruling of its denial, and there were two demands - also - the first was in the difference of schools in its occurrence, and the evidence of each team and the most correct of them, while the second came in the ruling of those who denied it. and deepened the research in it, and explored its depths; Because it is one of the issues that appear in most of the works with brief references, and I showed the most correct of the scholars’ sayings about it, then I added all of that with a conclusion in which I showed the most important results that I reached in this research.
In all of this, I have referred to the original sources in books of beliefs, biographies, and so on, and I do not claim perfection in that. Whatever was correct is by the grace of God Almighty, and whatever was of defect or error was from myself, my shortcomings, and my incapacity.
(6)
(1)
Spectrophotometric method was developed for the determination of copper(II) ion. Synthesized (2,2[O-Tolidine-4,4-bis azo]bis[4,5-diphenyl imidazole]) (MBBAI) was used as chromogenic reagent at pH=5. Various factors affecting complex formation, such as, pH effect, reagent concentration, time effect and temperature effect, have been considered and studied. Under optimum conditions concentration ranged from (5.00-80.00) µg/mL of copper(II) obeyed Beer`s Low. Maximum absorption of the complex was 409nm with molar absorpitivity 0.127x104 L mol-1 cm-1. Limit of detection(LOD) and Limit of quantification were 1.924 and 6.42 μg/mL, respectively.
... Show More
(6)
(3)
Visible-light photodetectors constructed Fe2O3 were manufactured effectively concluded chemical precipitation technique, films deposited on glass substrate and Si wafer below diverse dopant (0,2,4,6)% of Cl, enhancement in intensity with X-ray diffraction analysis was showed through favored orientation along the (110) plane, the optical measurement presented direct allowed with reduced band gap energies thru variation doping ratio , current–voltage characteristics Fe2O3 /p-Si heterojunction revealed respectable correcting performance in dark, amplified by way of intensity of incident light, moreover good photodetector properties with enhancement in responsivity occurred at wavelength between 400 nm and 470 nm.
(2)
(2)
Encasing glass fiber reinforced polymer (GFRP) beam with reinforced concrete (RC) improves stability, prevents buckling of the web, and enhances the fire resistance efficiency. This paper provides experimental and numerical investigations on the flexural performance of RC specimens composite with encased pultruded GFRP I-sections. The effect of using shear studs to improve the composite interaction between the GFRP beam and concrete was explored. Three specimens were tested under three-point loading. The deformations, strains in the GFRP beams, and slippages between the GFRP beams and concrete were recorded. The embedded GFRP beam enhanced the peak loads by 65% and 51% for the composite specimens with and without shear connectors,
... Show More
(18)
Pharmaceuticals have been widely remaining contaminants in wastewater, and diclofenac is the most common pharmaceutical pollutant. Therefore, the removal of diclofenac from aqueous solutions using activated carbon produced by pyrocarbonic acid and microwaves was investigated in this research. Apricot seed powder and pyrophosphoric acid (45 wt%) were selected as raw material and activator respectively, and microwave irradiation technique was used to prepare the activated carbon. The raw material was impregnated in pyrophosphoric acid at 80◦C with an impregnation ratio of 1: 3 (apricot seeds to phosphoric acid), the impregnation time was 4 h, whereas the power of the microwave was 700 watts with a radiation time of 20 min. A series o
... Show More
(16)
(2)
(2)
Staphylococcus Sp.is the most common type of bacteria found in contamination place, we design this
study to compare the contamination accident between two hospitals in Baghdad.One of them isthe Burns
Specialist Hospital in the Medical CityinRusafa and another one is Al-Karama Hospital in Karkh. The
samples were collected fromOperativeWard No1 (OW1), Operative Ward No2 (OW2), Consulting Pharmacy
(CP), Emergency Room (ER), Reception Room (RR), Women's Ward (WW) and Men's Ward (MW).The
samples were taken from inside each clinical unit, surfaces, food, and air. The results showed that the
number of samples containing Staphylococcus sp. bacteria is 81, including 45 belonging to Al-Karama Burns
Ward Ho
(3)
(1)
The present study explores the solar-induced photocatalytic degradation of reactive red (RR) and reactive turquoise (RT) dyes in a single system using TiO2 immobilized in xanthan gum (TiO2/XG), synthesized using the sol–gel dip-coating technique for direct precipitation. SEM-EDX, XRD, FTIR, and UV–Vis were used to assess the characteristics of the resulting catalyst. Moreover, the effects of different operating parameters, specifically pH, dye concentration, TiO2/XG concentration, H2O2 concentration, and contact time, were also investigated in a batch photocatalytic reactor. The immobilized TiO2/XG catalyst showed a slight adsorption degradation efficiency and then improved the RR and RT dye degradation activity (92.5 and 90.8%
... Show More
(17)
(16)
The Asymmetrical Castellated concavely – curved soffit Steel Beams with RPC and Lacing Reinforcement improves compactness and local buckling (web and flange local buckling), vertical shear strength at gross section (web crippling and web yielding at the fillet), and net section ( net vertical shear strength proportioned between the top and bottom tees relative to their areas (Yielding)), horizontal shear strength in web post (Yielding), web post-buckling strength, overall beam flexure strength, tee Vierendeel bending moment and lateral-torsional buckling, as a result of steel section encasement. This study presents two concentrated loads test results for seven specimens Asymmetrical Castellated concavely – curved soffit Steel Be
... Show More
(5)
(4)
Objectives This work presents laser coating of grade 1 pure titanium (Ti) dental implant surface with sintered biological apatite beta-tricalcium phosphate (β-TCP), which has a chemical composition close to bone. Materials and methods Pulsed Nd:YAG laser of single pulse capability up to 70 J/10 ms and pulse peak power of 8 kW was used to implement the task. Laser pulse peak power, pulse duration, repetition rate and scanning speed were modulated to achieve the most homogenous, cohesive and highly adherent coat layer. Scanning electron microscopy (SEM), energy dispersive X-ray microscopy (EDX), optical microscopy and nanoindentation analyses were conducted to characterise and evaluate the microstructure, phases, modulus of elasticity
... Show More
(26)
(20)