This research concerns the fact of the school garden and how can we tackle this issue. The research starts with a question forwarded to those who are interested in the ministry of education matters; the question is that how is the extent of interest in the school garden project? And how it is activated in the Iraqi Educational Institution program? In addition, the analysis reveals the importance of the school garden since we, as teachers and students, suffer from seeing the view of the trashes, the wastes of school furniture, the stinking water and the weeds and how it is accumulated in the back yard of the school. To add fuel to the fire, the increase in number of the students; year after year. This increase leads to adding more classes to the school building against the green yard.
The research clarifies that the school garden eliminates the phenomenon of desertification, participates in weather moderation and gives happiness to both the students and the teachers. While disregarding the school garden obstructs the success of teaching process that the school aimed at, since the school is created by the society to make it the second educational institute in the student’s life. This institute originates the generations of the future life. Thus, there should be existed the financial and human resources to help in completing these functions.
The financial capacities means providing a good building that is similar to those in the developed countries which is considered as a factory that raises new generations who love their country and society and able to create, give and be self-sufficiency. In the other hand, the human resources means the teachers groups and the scientific and educational organizations.
The research reaches at these recommendations:
1. Organizing edification courses for the teachers about the school environment and health and the importance of the school garden and how to take care of it; since the teacher is considered as a main factor in the success of the environmental education and fulfilling its goals.
2. Organizing periodical campaigns that concern school cleaning and repairing for the garden and the other things in the school building; involves fill the ponds inside and outside the school building in cooperation with the Municipal Council and Health department. Such campaigns quit the increase of the diseases that ponds bring from the stinking water.
3. Establishing annual competitions for the most beautiful school garden involves all the schools in the capital Baghdad or the schools of the whole country. In addition, establishing food competition involves the fruits and dates that the trees in those schools give, to save money for the school gardens themselves.
4. The interest in school gardens participates in raining both the food product and the education level for the students, for it provides nice weather and work opportunities for the students and the other people in the school region.
5. The role of the school garden must not be ignored for it gives economic, social and psychological benefits for the society and its people. All of which provide good opportunities for the students to practice healthy exercises and considered as places that attract the students. This type of work brings relief and comfort to the students’ spirits. Besides, it allows them acquiring good habits.6. The interest should involve taking care of other things in the school building such as the library which involves periodical renewing of the books, the laboratories and the school masque.
Eventually, the reconstruction of the school buildings in a way that goes with the educational goals create a generation who loves his society, has self-confidence and protects his social possessions that is worthy of his personality and the others personalities. Such positive sides prepare a good generation and take them away from complaining and hating the school itself.
In this study, ceramic purifier (CP) was produced from a mixture of Iraqi raw materials. This ceramic mixture was prepared using Bentonite as a Clay, Porcelanite as a Silica, and Limestone as a flux. The produced ceramic filter was formed by semi-dry compressing method and was fired at 1200 C?. Physical properties of the produced CP were measured. A hydraulic test rig was constructed to study the hydraulic conductivity of the produced CP. The average hydraulic conductivity of the produced CP was 55 times that of commercial types of ceramic filters. The mineral composition of the produced ceramics was found by X-Ray tests. Tests results showed that all of the produced ceramics filters composed mainly of low Cristobalte and Tridoymite in addi
... Show More
(1)
Reinforced concrete barriers have been commonly used in protecting the important building because the response of R.C. barriers subjected to blast loading is practically more acceptable than other materials used to build the barriers. In this study, the response of R.C. barriers was detected due to the blast effects caused by two charge weights (50 kg and 400 kg); ANSYS 14 was used to simulate the problem. A horizontal distance of 2 m between the explosive TNT charge and the front face of wall was taken. The pressure on the front face of the concrete barriers was measured at three levels. The R.C. barrier was entirely damaged when subjected to the blast effects caused by 400 kg TNT explosion bomb. However, the 50 kg TNT charge had
... Show MoreIn this work 2-hydrazino pyrimidine (1) was prepared from 2-mercapto pyrimidine with hydrazine hydrate. Treatment of (1) with active methylene compounds gave 2-(3,5-dimethyl -1 H – Pyrazole-1-yl) pyrimidine , whereas the reaction of (1) with carboxylic anhydride namely maleic anhydride or 1,2,3,6-tetra hydro phthalic anhydride yielded 1-Pyrimidine-2-yl-1,2-dihydro pyridazine-3,6-dione (3) and 2 – Pyrimidin -2-yl -2,3,4 a ,5,8 a – hexahydro phthalazine 1,4 – dione (4) . Reaction of (1) with phenyl isothiocyanate and ethyl chloro acetate afforded 3-Phenyl-1,3-thiazolidine-2,4-dione-2( pyrimidine -2- yl hydrazone (6) Azomethine (7-10) were prepared through condensation of (1) with aromatic aldehydes or ketones, then comp
... Show More
(6)
Water absorbent polymers (WAP) are new component in producing building materials. They provide internal curing which reduces autogenous cracking, eliminates autogenous shrinkage, mortar strength increased, enhance early age strength to withstand strain, improve the durability, introduce higher early age compressive strength, have higher performance and reduce the effect of insufficient external curing. This research used different percent of polymer balls to choose the percent that provides good development in compressive strength with time for both water and air curing. The water absorption polymer balls in this research have the ability to absorb water and after usage in concrete they spill out the water (internal curing) and shri
... Show More
(1)
The article emphasizes that 3D stochastic positive linear system with delays is asymptotically stable and depends on the sum of the system matrices and at the same time independent on the values and numbers of the delays. Moreover, the asymptotic stability test of this system with delays can be abridged to the check of its corresponding 2D stochastic positive linear systems without delays. Many theorems were applied to prove that asymptotic stability for 3D stochastic positive linear systems with delays are equivalent to 2D stochastic positive linear systems without delays. The efficiency of the given methods is illustrated on some numerical examples. HIGHLIGHTS Various theorems were applied to prove the asymptoti
... Show More
(53)
(54)
In this work the production of activated carbon (AC) from Imperata is done by microwave assisted Potassium hydroxide (KOH) activation and using this activated carbon for the purpose of the uptake of amoxicillin (AMX) by adsorption process from aqueous solution. The effects for irradiation power (450-800W), irradiation time (6-12min) as well as impregnation ratio (0.5-1 g/g) on the AMX uptake and yield AMX uptake at an initial concentration of AMX (150 mg/g). The optimum conditions were 700 W irradiation power, 10 min time of irradiation, as well as 0.8 g/g impregnation ratio with 14.821% yield and 12.456 mg/g AMX uptake. Total volume of hole and the area of the surface (BET) are 0.3027 m³/g, and 552.7638 m²/g respectively. The properti
... Show More