Objectives: Assessment outcome of DOTS (Directly observed therapy short course) program in Al-Sader City
Sector that was established by the WHO.
Methodology: Three cohorts groups of patients attending Baghdad TB institute and TB center in Al-Sader city
were followed retrospectively. The 1st cohort included (314) patients registered in year (2003), the 2nd cohort
included (327) patients registered in year (2004), the 3rd cohort included (321) patients registered in year
(2005). The collected data were analyzed for case detection, treatment outcomes, retreatment outcomes,
treatment success, and retreatment success in regard to time, age and sex.
Results: The following rates were extracted for the three cohort: Case detection rate within 1st, 2nd, and 3rd
cohort were (73.36%, 64.24%, and 71.49% respectively).Treatment outcomes (cured, completed treatment,
defaulters, treatment failure, died and transfer out) of new smear positive patients within the 1st, 2nd and 3rd
were (71.7%, 12.7%, 10.2%, 3.5%, 1%, 1%), (64.8%, 19.9%, 0.9%, 7%, 0.6%, 6.7%) and (61.4%, 24%, 3.1%, 5.9%,
0.6%, 5% respectively).Retreatment outcomes (cured, completed treatment, defaulters, treatment failure, died
and transfer out) within 1st, 2nd and 3rd cohort were (55.6%, 7.9%, 6.6%, 15.2%, 4%, 10.6%), (44.9%, 7.7%,
2.6%, 21.8%, 4.5%, 18.6%) and (41.8%, 14.6%, 11.4%, 19.6%, 1.9%, 10.8% respectively. Treatment success rate
within the 1st, 2nd and 3rd cohort were (84.39%, 84.7%, and 85.35%) respectively. Retreatment success rate
within the 1st, 2nd and 3rd cohort was (63.57%, 52.56%, and 56.32%) respectively.
Recommendation :Increase case detection rate through increase health awareness to the community about
the mode of transmission and risk of TB disease, Increase the training of health team so that they can follow up
of patients at home, Increase follows up of defaulters to be able to deal with them and a study for relapses
cases is recommended
The aim of this research is to develop mechanical properties of a new aluminium-lithium-copper alloy. This alloy prepared under control atmosphere by casting in a permanent metal mould. The microstructure was examined and mechanical properties were tested before and after heat treatment to study the influence of heat treatment on its mechanical properties including; modulus of elasticity, tensile strength, impact, and fatigue. The results showed that the modulus of elasticity of the prepared alloy is higher than standard alloy about 2%. While the alloy that heat treated for 6 h and cooled in water, then showed a higher ultimate tensile stress comparing with as-cast alloy. The homogenous heat treatment gives best fatigue
... Show MoreIt was Aristotle who first drew attention to the superior quality of literature to the other factual fields of knowledge. Contradicting his predecessor Plato on the issue of „truth,‟ Aristotle believed that „poetry is more philosophical and deserves more serious attention than history: for while poetry concerns itself with universal truths, history considers only particular facts.‟ (1) The critical attention to the disparity between the literary truth and the historical truth grew up throughout ages to flourish in the Renaissance and after with a bunch of distinctive views on this subject. Sir Philip Sidney (1554-1586), for example, found that literature does not offer a literal description of reality but rather a heightened vers
... Show MoreThe widespread house sparrow Passer domesticus biblicus has a close association with humans and inhabits almost all ecosystems near human settlements in Iraq. It is exposed to different kinds of parasites in its habitats. Examining of house sparrow for the cestode parasites revealed that 25 specimens of 56 were infected with Raillietina echinobothrida. Intensity among infected male and female hosts with this cestode and its description is provided and discussed. The present finding constitutes the first record for this parasite in house sparrow in Iraq.
The structural, optical properties of cupper indium gallium selenite (CuIn1-xGaxSe) have been studied. CuIn1-xGaxSe thin films for x=0.6 have been prepared by thermal evaporation technique, of 2000±20 nm thickness, with rate of deposition 2±0.1 nm/sec, on glass substrate at room temperature. Heat treatment has been carried out in the range (373-773) K for 1 hour. It demonstrated from the XRD method that all the as-deposited and annealed films have polycrystalline structure of multiphase. The optical measurement of the CIGS thin films conformed that they have, direct allowed energy gap equal to 1.7 eV. The values of some important optical parameters of the studied films such as (absorption coefficient, refractive index, extinction coeffici
... Show MoreIn the present research, the electrical properties which included the ac-conductivity (σac), loss tangent of dielectric (tan δ) and real dielectric constant (ε’) are studied for nano polycarbonate in different pressures and frequencies as a function of temperature these properties were studied at selective temperature gradients which are (RT-50-100-150-250)°C. The results of the study showed that the values of dielectric constant and dissipation factor increase with increasing pressure and temperature and decreases by increasing frequency. And the results of electrical conductivity showed that it increases with increasing temperature, pressure and frequency.
Human serum albumin (HSA) nanoparticles have been widely used as versatile drug delivery systems for improving the efficiency and pharmaceutical properties of drugs. The present study aimed to design HSA nanoparticle encapsulated with the hydrophobic anticancer pyridine derivative (2-((2-([1,1'-biphenyl]-4-yl)imidazo[1,2-a]pyrimidin-3-yl)methylene)hydrazine-1-carbothioamide (BIPHC)). The synthesis of HSA-BIPHC nanoparticles was achieved using a desolvation process. Atomic force microscopy (AFM) analysis showed the average size of HSA-BIPHC nanoparticles was 80.21 nm. The percentages of entrapment efficacy, loading capacity and production yield were 98.11%, 9.77% and 91.29%, respectively. An In vitro release study revealed that HSA-BIPHC nan
... Show MoreThe present study investigates the application of a combined electrocoagulation-electrooxidation (EC-EO) process for the treatment of wastewater generated from Al-Dewaniya petroleum refinery plant in Iraq. The EC-EO process was examined in terms of its ability to simultaneously produce coagulant and oxidant agents by using a parallel plate configuration system composed of stainless steel plates as cathode and pair of aluminum and graphite plates as anode at two different current concentrations (1.92A/l and 0.96A/l). The results showed that the best conditions for treatment of Al-Dewaniya petroleum refinery wastewater using the combined approach were current concentration of (0.96A/l), current density
The whole research paper examines the impact of ozone as either a just use-alone and coagulation benefit, mainly upon the reduction of dissolved organic carbon from the water with a moderate rate of DOC 10.75 mg/land CaCO3 calcium hardness 300 mg/l. A raw water sample has been taken from the Tigris River (Baghdad, Iraq) was being adopted in research work. The performance of ozone therapy has been assessed by calculations of DOC, DOC quantities, UV254, as well as total trihalomethane (TTHM). Research findings have shown that with 0.9 mg O3/mg DOC ozone use-alone, approximately 60% UV254 reduction and approximately 28% DOC reduction will occur.DOC fractionation analysis indicates that within the water samples, ozone could alter the co
... Show MoreIn this work, chemical and thermal treatment were used to enhance silica extract on the purity of rice husk and to reduce the impurities associated with the extraction of silica. The thermal degradation of rice husk was studied. The characteristics and thermal degradation behavior of rice husk which investigated using thermogravimetric analyzer (TGA). Hydrochloric acid was used to soak the rice husk and the study of leaching influence is followed by XRF tests for samples before and after the combustion process. Acid treatment and combustion method seem to have a clear effect on silica purity. The pyrolysis processes were carried out at Laboratory temperature up to 650 oC in the presence of nitrogen gas flowing at 150 ml/min. The effect o
... Show More