Preferred Language
Articles
/
ijs-7267
The Suitability of Fatha Clay Deposits for Clay Bricks Industry in Zurbatiya Area, Eastern Iraq
...Show More Authors

     This research aims to study the suitability of the Fatha Formation clay deposits for the brick industry in the Zurbatiya area, Wasit Government. Two sites (Al-Salam police station and Al-Taff station) were selected. The clay deposits were subjected to particle size analysis, atterberg limits, chemical and mineralogical analyses. The samples have 31.45% clay, 52.91% silt, and 15.64% sand. Chemical analyses revealed that SiO2 and CaO are the clay deposits' main components, indicating the high content of quartz and calcium carbonate. The mineralogical analysis by XRD techniques indicated that quartz, calcite, feldspar, gypsum, and dolomite are the non-clay minerals; Kaolinite, illite, palygorskite and chlorite are the most clay minerals, followed by the mixed layer (montmorillonite-chloride). Clay brick samples were formed, dried and then fired using a particular firing program. The produced bricks have good water absorption (20-24.06%), compressive strength (36.23-41.63 N/mm2), and efflorescence (moderate – slight to nill). The properties of the produced clay bricks agree with the requirements of class A and B of the Iraqi Standard Specifications No.25,1993, British (BS 3921, 1985 ), and American  Standard (ASTM C10, 2010).

Scopus Crossref
View Publication Preview PDF
Quick Preview PDF
Publication Date
Tue Jan 30 2018
Journal Name
Iraqi Journal Of Science
Hydrochemical Assessment of Groundwater of Dibdibba Aquifer in Al- Zubair Area, Basra, South of Iraq and its Suitability for IrrigationPurposes
...Show More Authors

This study focuses on cation and anion concentrations and their distribution in the Dibdibba aquifer in the Zubair area at Basra city, southern Iraq to assess the groundwater quality for the agricultural purpose. The physicochemical properties (TSS, Ec, pH, cation and anion concentrations) of the groundwater samples through
18 wells was measured. Results showed that the dominant groundwater type is Na, Mg, Ca-Chloride type. The Magnesium Hazard, Sodium Adsorption Ratio, Na%, total dissolved solid, Electrical conductivity and pH were used to assess the suitability of groundwater for irrigation purposes.. The assessment results indicate that the groundwater is characterized by no Mg-harmful, excellent

... Show More
View Publication Preview PDF
Publication Date
Fri Jan 06 2012
Journal Name
Journal Of Engineering
Effect of change in the coefficient of permeability on consolidation chacractertistics of clay
...Show More Authors

Publication Date
Thu Dec 30 2021
Journal Name
Iraqi Journal Of Science
Paleoenvironmental conditions during deposition of Kolosh and Gercus formations in northern Iraq as deduced from clay mineral distributions
...Show More Authors

     A mineralogical study using X-ray diffraction supported by scanning electron microscopic examination on the Paleocene- Eocene Kolosh and Gercus formations from northern Iraq is conducted to show the distribution of clay minerals and their paleoenvironmental implications. Smectite palygorskite, kaolinite, illite, and chlorite are commonly present in varying proportions within the Kolosh and Gercus formations. Association of smectite and chlorite in the claystone of the Paleocene Kolosh Formation refers to marine environment of this formation, whereas development of palygorskite fibers from smectite precursor may relate to post-depositional diagenesis. In addition, the abundance of illite and kaolinite in the Eocen

... Show More
View Publication Preview PDF
Scopus (1)
Scopus Crossref
Publication Date
Mon Aug 01 2011
Journal Name
Journal Of Engineering
PROPERTIES OF HARDENED CONCRETE USING CRUSHED CLAY BRICK AS AGGREGATES
...Show More Authors

This paper provides the result of an investigation to use of crushed clay brick as
aggregates in producing concrete. Eight different crushed clay brick aggregate concretes were
used in this investigation. Compressive strength, splitting tensile strength and pulse velocity of
crushed clay brick aggregates concrete were determined and compare to natural aggregate
concrete. The compressive strength of crushed clay brick aggregates concretes were always
lower than the compressive strength of natural aggregates concrete regardless the age of
concrete, but the crushed clay brick aggregates concrete showed better performance as the age of
concrete increases and average reduction in compressive strength were 33.5% at the age

... Show More
View Publication Preview PDF
Crossref (4)
Crossref
Publication Date
Sat Nov 28 2020
Journal Name
Iraqi Journal Of Science
Clay Minerals and Organic Matter from Deeply Buried Ordovician-Silurian Shale in Western Iraq: Implications for Maturity and Hydrocarbon Generation
...Show More Authors

The present work is conducted on the Paleozoic (Ordovician) Khabour and the (Silurian) Akkas shales in the Akkas-1 well of western Iraq. The study is aiming to determine the implications of clay mineral transformation, organic mineral distribution and maturity of hydrocarbon generation, using X-ray diffraction (XRD), scanning electron microscopy (SEM) in addition to organic matter concentrations. In the shale of the Khabour Formation, amorphous organic matter is common and includes various Tasmanite-type organic matter, vitrinite, inertinite, and bituminite. The main clay minerals observed include illite, chlorite, kaolinite, in addition to mixed-layer illite-smectite and rare smectite. In Silurian shale, high content of organic matter i

... Show More
View Publication Preview PDF
Scopus (5)
Scopus Crossref
Publication Date
Thu Feb 01 2024
Journal Name
Journal Of Engineering
Improving the Bearing Capacity of Clay Soil Using Plastic Bottle Waste
...Show More Authors

With the increase in industry and industrial products, quantities of waste have increased worldwide, especially plastic waste, as plastic pollution is considered one of the wastes of the modern era that threatens the environment and living organisms. On this basis, a solution must be found to use this waste and recycle it safely so that it does not threaten the environment. Therefore, this research used plastic waste as an improvement material for clay soil. In this research, two types of tests were conducted, the first of which was a laboratory test, where the undrained shear strength (cohesion), compression index (Cc), and swelling index (Cr) of the improved and unimproved soils were calculated (plastic was added in pr

... Show More
View Publication Preview PDF
Crossref
Publication Date
Sat Jan 01 2022
Journal Name
Journal Of The Mechanical Behavior Of Materials
Reducing settlement of soft clay using different grouting materials
...Show More Authors
Abstract<p>Different injection material types were tried in the injection of soft clay, such as lime (L), silica fume (SF), and leycobond-h (LH). In this study, experiments were made to study the effect of injection on soft clay consolidation settlement. A sample of natural soft clayey soil was investigated in the laboratory and the sample was injected with each of the grout materials used, L, SF, L + SF, and L + SF + LH. A 20 cm<sup>3</sup> of each slurry grout was conducted into the soil, which was compacted in California Bearing Ratio (CBR) mold and cured for 7 days, and then the sample was loaded to 80 N load by a circular steel footing 60 mm in diameter. The settlement was r</p> ... Show More
View Publication
Scopus (5)
Crossref (6)
Scopus Clarivate Crossref
Publication Date
Fri May 01 2020
Journal Name
Journal Of Engineering
Improvement of the Rheological and Filtration Properties of Drilling Mud Using the Syrian Clay
...Show More Authors

Drilling fluid properties and formulation play a fundamental role in drilling operations. The Classical water-based muds prepared from only the Syrian clay and water without any additives((Organic and industrial polymers) are generally poor in performance. Moreover, The high quantity of Syrian clay (120 gr / l) used in preparing drilling fluids. It leads to a decrease in the drilling speed and thus an increase in the time required to complete the drilling of the well. As a result, the total cost of drilling the well increased, as a result of an increase in the concentration of the solid part in the drilling fluid. In this context, our study focuses on the investigation of the improvement in drilling mud   Prepa

... Show More
View Publication Preview PDF
Crossref (1)
Crossref
Publication Date
Tue May 01 2018
Journal Name
Journal Of Global Pharma Technology
Equilibrium, thermodynamic and kinetic study of the adsorption of a new mono azo dye onto natural Iraq clay
...Show More Authors

In the present work, bentonite clay was used as an adsorbent for the removal of a new prepared mono azo dye, 4-[6-bromo benzothiazolyl azo] thymol (BTAT) using batch adsorption method. The effect of many factors like adsorption time, adsorbent weight, initial BTAT concentration and temperature has been studied. The equilibrium adsorption data was described using Langmuir and frundlich adsorption isotherm. Based on kinetics study, it was found that the adsorption process follow pseudo second order kinetics. Thermodynamics data such as Gibbes Free energy ∆Gᵒ, entropy ∆Sᵒ and ∆Hᵒ were also determined using Vant Hoff plot.

Scopus (4)
Scopus
Publication Date
Fri Dec 08 2023
Journal Name
Iraqi Journal Of Science
Delineation of groundwater aquifers using VES and 2D imaging techniques in north Badra area, Eastern Iraq
...Show More Authors

The resistivity survey was carried out by using vertical electrical sounding (VES) and 2D imaging techniques in the northern Badra area, Eastern Iraq. Eleven VES points distributed on two parallel profiles and six 2D imaging stations were applied using long survey lines.
In general, two types of aquifers are recognized in the study area. The first is the Quaternary aquifer, which appears in all geological sections and inverse model of 2D imaging stations (2DS).This aquifer can be divided into upper and lower aquifers as shown in (2DS1), (2DS3), and (2DS4). Generally, the thickness of this aquifer ranges between (30-200 m) which occurs at a depth of (10-30m) according to geological sections, while its thickness ranges between (35-180m)

... Show More
View Publication Preview PDF