This research aims to study the suitability of the Fatha Formation clay deposits for the brick industry in the Zurbatiya area, Wasit Government. Two sites (Al-Salam police station and Al-Taff station) were selected. The clay deposits were subjected to particle size analysis, atterberg limits, chemical and mineralogical analyses. The samples have 31.45% clay, 52.91% silt, and 15.64% sand. Chemical analyses revealed that SiO2 and CaO are the clay deposits' main components, indicating the high content of quartz and calcium carbonate. The mineralogical analysis by XRD techniques indicated that quartz, calcite, feldspar, gypsum, and dolomite are the non-clay minerals; Kaolinite, illite, palygorskite and chlorite are the most clay minerals, followed by the mixed layer (montmorillonite-chloride). Clay brick samples were formed, dried and then fired using a particular firing program. The produced bricks have good water absorption (20-24.06%), compressive strength (36.23-41.63 N/mm2), and efflorescence (moderate – slight to nill). The properties of the produced clay bricks agree with the requirements of class A and B of the Iraqi Standard Specifications No.25,1993, British (BS 3921, 1985 ), and American Standard (ASTM C10, 2010).
The present research included sampling and analysis of 41 soil samples , the samples cover various areas of Nasiriyah city (industrial,commercial,residential and agricultural ) to estimate pollution levels of lead element and determine the correlation between lead concentration and natural factors in soil which represent sedimentary organic matter content, granular gradient, clay minerals and non-clay minerals . The results of the current study showed that the average concentration of lead in the soil samples was 61.12 ppm , it was noticed an increase in the concentration of lead in environmental components in the area of this study especially in residential , industrial and commercial location and the impact of natural factors of the so
... Show MoreGroundwater suitability for consumption in the Yaychi area is determined by analyzing groundwater samples of 21 wells distributed in the area, for dry period which begin from May to October 2016 and wet period begin from October 2016 to May 2017. Results indicated that the temperature (T °C) have normal values and the
water of low alkaline and excessively mineralized, while most of these samples, for both periods, are slightly – brackish water. The mean ion concentrations for two periods indicates that all major and secondary ions are higher than water quality standards for drinking purposes according to World Health Organization (WQI) and
Iraqi Standard (IQS) except for K and Cl ions. The water in
The mineralogical study using X-ray diffraction (XRD) supported by scanning electron microscopic (SEM) examination and energy-dispersive spectroscopy (EDS) on the claystone of the Kolosh Formation from northern Iraq was conducted to Shows the provenance history of rocks. Chlorite, montmorillonite, illite, palygorskite, and kaolinite were recorded in different amounts in the study area. The association of montmorillonite and chlorite in the claystone of the Kolosh Formation (Paleocene) refers to the marine environment. Chlorite and montmorillonite are the common minerals in the Kolosh Formation with less common of illite, kaolinite and palygorskite. These clay minerals are of authigenic, detrital and diagenetically origin, which
... Show MoreAl-Salhubia, area is located within the arid region in southern Iraq. Although no surface water is available in this area, the groundwater is considered the basis in the area, it is available in both good quality and quantity. For that reason, it is of prime importance to examine water type in the unconfined aquifer to determine suitability of groundwater for irrigation purposes. The groundwater type in the studied area is Ca-Mg dominant SO4 facies according to Piper and Stiff diagrams. Based on SAR, Na%, RSC, EC, and PI, the groundwater quality in the study area is suitable for irrigation in general.
The composition of the clay taken from the lake of Hamrin, Iraq was studied with the determination of the concentrations of the major oxides and the minor oxides in it. Kaolinite was the most dominant clay in the samples, while quartz was the most abundant non-clay mineral.
Some physico-chemical parameters in lake's water were determined such as oxygen, a chlorosity, nutrient salts, pH, total alkalinity, total nitrogen, total phosphorous and silicate.
The effect of increased wastewater and human activities affected the composition of water and lead to a decrease in the productivity of the lake which was reflected by the relatively low pH values (average 8.0) and alkalinity in water as a result of t
... Show MoreThe planning, designing, construction of excavations and foundations in soft to very soft clay soils are always difficult. They are problematic soil that caused trouble for the structures built on them because of the low shear strength, high water content, and high compressibility. This work investigates the geotechnical behavior of soft clay by using tyre ash material burnt in air. The investigation contains the following tests: physical tests, chemical tests, consolidation test, Compaction tests, shear test, California Bearing Ratio test CBR, and model tests. These tests were done on soil samples prepared from soft clay soil; tyre ash was used in four percentages (2, 4, 6, and 8%). The results of the tests were; The soil samples which
... Show MoreThis study deals with the petrology of the lower succession of the Injana Formation in the Shorr Shareen area, Wasit Governorate, Eastern Iraq. The study revealed that the sandstone is litharenite consists of 45.56% rock fragments, 22.13% quartz and 8.5% feldspars. The matrix is about 8.39%, consisting of silt and clay particles. The cement is variable (carbonates 8.42%, evaporites 1.78% and iron oxides 0.96%). The grain assemblage infers that the source of the rock fragments is nearby. The petrographic analyses indicate that the studied Injana sandstones are immature mineralogically because of their content of unstable constituents, such as lithic fragments and feldspars. In addition, the presence of such fresh feldspars indica
... Show MoreIn this research, a number of the western al-Anbar clays (red iron clays, Attapulgite) were modified by treating them thermally with a temperature of 650oC. After that, these clays reflux with sodium hydroxide 5% for 1 hour by using microwave as a power supply. The research included fractionation alqayaira crude oil the fractionation included removing the asphaltene by precipitation from the crude using a simple paraffin solvent (normal hexane) as a non-soluble substance. After that it was filtered using the ash-free filter paper 42, the dissolved part, maltinate, was taken, drying a temperature of 75oC and weight, and to find the percentage of the two parts. Malatine was divided into three main parts (paraf
... Show MoreSoil stabilization with stone powder is a good solution for the construction of subgrade for road way and railway lines, especially under the platforms and mostly in transition zones between embankments and rigid structures, where the mechanical properties of supporting soils are very influential. Stone powder often has a unique composition which justifies the need for research to study the feasibility of using this stone powder type for ground improvement applications. This paper presents results from a comprehensive laboratory study carried out to investigate the feasibility of using stone powder for improvement of engineering properties of clays.
The stone powder contains bassanite (CaSO4. ½ H
... Show More