Preferred Language
Articles
/
ijs-606
Facies Analysis and Stratigraphic Development of the Zubair Formation in the Mesopotamian Zone, Southern Iraq
...Show More Authors

The Barremain-Aptian succession represented by two types of deposits, Clasits deposits of Zubair Formation. This formation is the most significant sandstone reservoir in Iraq, Deposited in fluvio- deltaic, deltaic and marine environments during the Barremain to Early Aptian age.

The area of study is located in the Mesopotamian Zone at S

The Barremain-Aptian succession represented by the Clasits deposits of Zubair Formation. This formation is the most significant sandstone reservoir in Iraq which deposited in fluvio- deltaic, deltaic and marine environments during the Barremain to Early Aptian age. The area of study is located in the Mesopotamian Zone at Southern part of Iraq which represented by five oil fields (Nasira, Luhais, Suba, Tuba and West Qurnah).

     The petrographic study showed that quartz mineral is the main component of the sandstone in Zubair Formation with minor percentage of feldspar and rare rock fragments to classified as quartz arenite. The formation consists of mainly interbedded sandstone, shale, siltstone and sometimes thin beds of carbonate. Shale thickness increase towards east and decrease the sandstone towards the east southern of Iraq.

Zubair characterized in the lower member by mud - dominated delta front associated facies. They seem to vertically separate relatively multi-storied mode and multi-lateral changes deltaic channel sand bodies resulting in compartmentalized reservoir architecture.

The presence of the delta front associated facies overlaying the unconformity surface (SB1) refers to the transgressive system tract (TST). This stage was ended by the deposition the fluvial channel facies to mark a high-stand system tract (HST). The fluctuation point between the TST and HST is represented a maximum flooding surface.

The middle member of Zubair Formation is characterized by moderate to well sorted quartz arenite sandstone with appearance bands of the shale overlaying the sand body.  This succession was deposied in the delta plain environment with steps of sea level rise during the transgressive stage. There are two sequences as TST in this part which end with the maximum sea level rise (MFS) to mark the upper part of the Zubair Formation. The next stage was appeared high concentrations of organic matters and pyrite mineral which indicating that the sedimentary environment has been reduced to the marshes environment during the HST.

 The upper part of the Zubair Formation showed a shallower environment with shale dominated rocks associated with high organic matters and pyrite. This indicates to the finning up-ward mode during highstand stage when the deposition environment changed from delta plain fluvial channel to delta front mouth bar. The sea level rise marked the end of this stage when deposition the upper part of Zubair Formation, and the beginning of deposition of shallow marine carbonate of the Shuaiba Formation as shallow carbonate marine.

outhern part of Iraq which represented by five oil fields (Narira, Luhais, Suba, Tuba and West Qurnah).

By studying the core and thin sections, the main component of the Zubair Formation is Sand grain size ranges from very fine to course, quartz classified as a sandstone quartzarenite represented a high maturity and  reflect a good reservoir property, with minor percentage of feldspar and rare rock fragments, it consists of mainly interbedded sandstone, shale, siltstone and sometimes thin beds of carbonate. Shale thickness increase towards east and decrease the sandstone towards the east southern of Iraq.

Zubair Formation has three members (Lower, Middle and Upper) in the study area. The change in thickness and lithofacies depends on well locations. These changes have shown in logs, thin sections and core descriptions. These members are represented by five lithofacies deposited in the three main deltaic environments Prodelta, Delta Front (Mouth bar and Distributaries bay deep sea) and Delta Plain (Channel Sand).

The Lower member of ZubairFormation consists mainly of shale with low sandstone percentage changes in thickness from minimum value in Suba,  Luhais increase toward Nasira , Tuba and West Qurnah oil fields ,this member representing Transgressive systems tracts (TST) stage as rise in sea level ending with HighStand systems tracts(HST) stage reflecting a delta front association Mouth bar and Distributaries bay deep sea)  in Nasria, Suba and Luhais oil fields changes to prodelta in the lower part of lower member in Tuba and West Qurnah oil fields .

View Publication Preview PDF
Quick Preview PDF
Publication Date
Fri Jan 01 2016
Journal Name
Journal Of Engineering
A Mathematical Model of a Thermally Activated Roof (TAR) Cooling System Using a Simplified RC-Thermal Model with Time Dependent Supply Water Temperature
...Show More Authors

This paper presents a computer simulation model of a thermally activated roof (TAR) to cool a room using cool water from a wet cooling tower. Modeling was achieved using a simplified 1-D resistance-capacitance thermal network (RC model) for an infinite slab. Heat transfer from the cooling pipe network was treated as 2-D heat flow. Only a limited number of nodes were required to obtain reliable results. The use of 6th order RC-thermal model produced a set of ordinary differential equations that were solved using MATLAB - R2012a. The computer program was written to cover all possible initial conditions, material properties, TAR system geometry and hourly solar radiation. The cool water supply was considered time

... Show More
View Publication Preview PDF
Publication Date
Sat Mar 30 2019
Journal Name
Iraqi Journal Of Chemical And Petroleum Engineering
Removal of Manganese Ions (Mn2+) from a Simulated Wastewater by Electrocoagulation/ Electroflotation Technologies with Stainless Steel Mesh Electrodes: Process Optimization Based on Taguchi Approach
...Show More Authors

This study depicts the removal of Manganese ions (Mn2+) from simulated wastewater by combined electrocoagulation/ electroflotation technologies. The effects of initial Mn concentration, current density (C.D.), electrolysis time, and different mesh numbers of stainless steel screen electrodes were investigated in a batch cell by adopting Taguchi experimental design to explore the optimum conditions for maximum removal efficiency of Mn. The results of multiple regression and signal to noise ratio (S/N) showed that the optimum conditions were Mn initial concentration of 100 ppm, C.D. of 4 mA/cm2, time of 120 min, and mesh no. of 30 (wire/inch). Also, the relative significance of each factor was attained by the analysis

... Show More
View Publication Preview PDF
Crossref (5)
Crossref
Publication Date
Sun Mar 01 2020
Journal Name
Journal Of Colloid Interface Science
Corrigendum to “Organic acid concentration thresholds for ageing of carbonate minerals: Implications for CO2 trapping/storage” [J. Colloid Interface Sci. 534 (2019) 88–94]
...Show More Authors

Erratum for Organic acid concentration thresholds for ageing of carbonate minerals: Implications for CO2 trapping/storage.

Scopus Clarivate Crossref
Publication Date
Sat Mar 30 2019
Journal Name
Iraqi Journal Of Chemical And Petroleum Engineering
Removal of Manganese Ions (Mn2+) from a Simulated Wastewater by Electrocoagulation/ Electroflotation Technologies with Stainless Steel Mesh Electrodes: Process Optimization Based on Taguchi Approach
...Show More Authors

This study depicts the removal of Manganese ions (Mn2+) from simulated wastewater by combined electrocoagulation/ electroflotation technologies. The effects of initial Mn concentration, current density (C.D.), electrolysis time, and different mesh numbers of stainless steel screen electrodes were investigated in a batch cell by adopting Taguchi experimental design to explore the optimum conditions for maximum removal efficiency of Mn. The results of multiple regression and signal to noise ratio (S/N) showed that the optimum conditions were Mn initial concentration of 100 ppm, C.D. of 4 mA/cm2, time of 120 min, and mesh no. of 30 (wire/inch). Also, the relative significance of each factor was attained by the analysis of variance (ANO

... Show More
View Publication Preview PDF
Crossref (5)
Crossref
Publication Date
Thu Jun 06 2013
Journal Name
Advances In Physics Theories And Applications
Adsorption study of Symmetrical schiff base ligand 4,4 -[hydrazine -1,2- diylidenebis ( methan-1-yl-1-ylidene) bis ( 2-methoxyphenol)] on Granulated Initiated calcined Iraqi …
...Show More Authors

Publication Date
Sat Dec 30 2023
Journal Name
Basrah Journal Of Surgery
Can Hyaluronic acid gel enhance wound healing faster than Advanced Platelets Rich Fibrin following surgical removal of impacted mandibular third molars? A Randomized Controlled Trial
...Show More Authors

View Publication Preview PDF
Crossref
Publication Date
Sat May 14 2022
Journal Name
Oral And Maxillofacial Surgery
Evaluation of crestal sinus floor elevations using versah burs with simultaneous implant placement, at residual bone height ≥ 2.0 _ < 6.0 mm. A prospective clinical study
...Show More Authors

View Publication
Scopus (9)
Crossref (8)
Scopus Clarivate Crossref
Publication Date
Mon Mar 18 2019
Journal Name
Baghdad Science Journal
Enhancement of hydrothermally Co <sub>3</sub> O <sub>4</sub> thin films as H <sub>2</sub> S gas sensor by loading yttrium element
...Show More Authors

The gas sensing properties of Co3O4and Co3O4:Y nano structures were investigated. The films were synthesized using the hydrothermal method on a seeded layer. The XRD, SEM analysis and gas sensing properties were investigated for Co3O4and Co3O4:Y thin films. XRD analysis shows that all films are polycrystalline in nature, having a cubic structure, and the crystallite size is (11.7)nm for cobalt oxide and (9.3)nm for the Co3O4:10%Y. The SEM analysis of thin films obviously indicates that Co3O4possesses a nanosphere-like structure and a flower-like structure for Co3O4:Y.The sensitivity, response time and recovery time to a H2S reducing gas were tested at different operating

... Show More
Publication Date
Sun Oct 01 2023
Journal Name
Baghdad Science Journal
Solid Waste Treatment Using Multi-Criteria Decision Support Methods Case Study Lattakia City
...Show More Authors

Lattakia city faces many problems related to the mismanagement of solid waste, as the disposal process is limited to the random Al-Bassa landfill without treatment. Therefore, solid waste management poses a special challenge to decision-makers by choosing the appropriate tool that supports strategic decisions in choosing municipal solid waste treatment methods and evaluating their management systems. As the human is primarily responsible for the formation of waste, this study aims to measure the degree of environmental awareness in the Lattakia Governorate from the point of view of the research sample members and to discuss the effect of the studied variables (place of residence, educational level, gender, age, and professional status) o

... Show More
View Publication Preview PDF
Scopus (1)
Scopus Crossref
Publication Date
Tue May 16 2023
Journal Name
Journal Of Engineering
Load Distribution Factors For Horizontally Curved Composite Concrete-Steel Girder Bridges
...Show More Authors

This paper focuses on Load distribution factors for horizontally curved composite concrete-steel girder bridges. The finite-element analysis software“SAP2000” is used to examine the key parameters that can influence the distribution factors for horizontally curved composite steel
girders. A parametric study is conducted to study the load distribution characteristics of such bridge system due to dead loading and AASHTO truck loading using finite elements method. The key parameters considered in this study are: span-to-radius of curvature ratio, span length, number of girders, girders spacing, number of lanes, and truck loading conditions. The results have shown that the curvature is the most critical factor which plays an important

... Show More
View Publication Preview PDF
Crossref