This study is concerned with the identification of the validity of the Recent sediments deposited in the Playa for the purpose of making the laboratory bricks by extrusion and pressing. The steps followed in this study included the formation and then burning of the pyramids at (950-1100) C° for one hour of maturity to determine their applicability to the brick industry. The study area is located in Al Muthanna province, south of Iraq. It is located south of the district of Samawah at a distance of 80 km and to the north-west of Salman district, 64 kilometers south of Baghdad, represented by three hosts: (DHS 1, DH2 and S). The results of the chemical analysis of the study samples showed that they consist of the following major oxides: SiO2 = (39.34-42.82) TiO2 = (0.52-0.76) Na2O3 = (0.97-1.22) Fe2O3 = (4.19-5.89) CaO = (14.78-19.4) K2O = (0.91-1.14) Al2O3 = (8.02-9.85) MgO = (3.85-5.95) L.O.I = (16.31-19.32) silica SiO2 represented the highest ratio followed by Al2O3. Was manufactured 36 samples of the laboratory were manufactured and prepared by extrusion method were measured in dimensions (7 * 3.5 * 2.5) cm by extruding method and were burned at (950-1100) C° for the purpose of conducting physical and mechanical checks on them including Linear and volume shrinkage, color, Water absorption, Efforescence, and compressive strength. The results of these tests showed a decrease in water absorption and Efforescence, a decrease in the values of compressive strength with increased burning temperature, decreased Linearand volume shrinkage in most samples and increased in other samples with increasing burning temperature. In addition, 12 samples were made of the cylindrical laboratory size (diameter 50 mm, height 60 mm) in semi-dry pressing method, and were burned at (950-1100) C° for the purpose of physical and mechanical tests, color, Water absorption, Efforescence, and compressive strength. The results of these tests showed a decrease in water absorption and Efforescence and an increase in the values of compressive resistance while increasing the temperature of burning, while the colors of the samples ranged from light brown and yellow or pale yellow to white. The results of physical assays were met Linear and volume shrinkage, color, Water absorption and Efforescence. As well as mechanical tests: compressive strength results were in accordance with the Iraqi standard for this industry where the data of the results of this study showed the validity of these samples for the industry mentioned above.
Effects of Ozonated Water on Micro Leakage between Enamel and Fissure Sealants Prepared by Different Etching Technique (An in vitro Study), Baraa M Jabar*, Muna S Khalaf
Background and Aim. Coronary artery disease (CAD) is a major risk factor for the progression to heart failure (HF), which is associated with an increase in left ventricular volume (LVV). This study aims to measure ventricular function and myocardial perfusion imaging markers of the left side of the heart, which can be performed with injection of a 99mTc at stress and rest by using single-photonemission-computed-tomography (SPECT). Subject and methods. The study included 121 patients with CAD, comprising 53 females and 68 males with ages between 25 to 88 years and 265 healthy subjects comprising 84 males and 181 females. All patients and healthy subjects volunteered to participate in this study. They were classified according to
... Show MorePure and Fe-doped zinc oxide nanocrystalline films were prepared
via a sol–gel method using -
C for 2 h.
The thin films were prepared and characterized by X-ray diffraction
(XRD), atomic force microscopy (AFM), field emission scanning
electron microscopy (FE-SEM) and UV- visible spectroscopy. The
XRD results showed that ZnO has hexagonal wurtzite structure and
the Fe ions were well incorporated into the ZnO structure. As the Fe
level increased from 2 wt% to 8 wt%, the crystallite size reduced in
comparison with the pure ZnO. The transmittance spectra were then
recorded at wavelengths ranging from 300 nm to 1000 nm. The
optical band gap energy of spin-coated films also decreased as Fe
doping concentra
(1)
Laportea aestuans L. (Chew), Commelina virginica (L.) and Sida rhombifolia (L.) are common wild plants used in treating several ailments including diarrhea, dysentery, hernia, oedema, ulcers and many more in traditional African medicine especially, Nigeria. The potentials of Random Amplified polymorphic DNA (RAPD) primers in delimiting intra-specific variation in L. aestuans, C. virginica and S. rhombifolia was assessed using three RAPD primers. Plant and soil samples were collected from 19 local government areas in Lagos State and assessed for genetic and biochemical relationships. A total of 56 bands were produced of which 44 were polymorphic. Maximum number of bands (21) was produced by OPY
... Show More
In wide range of chemical, petrochemical and energy processes, it is not possible to manage without slurry bubble column reactors. In this investigation, time average local gas holdup was recorded for three different height to diameter (H/D) ratios 3, 4 and 5 in 18" diameter slurry bubble column. Air-water-glass beads system was used with superficial velocity up to 0.24 m/s. the gas holdup was measured using 4-tips optical fiber probe technique. The results show that the axial gas holdup increases almost linearly with the superficial gas velocity in 0.08 m/s and levels off with a further increase of velocity. A comparison of the present data with those reported for other slurry bubble column having diameters larger than
... Show MoreIn this paper, some series of new complexes of Mn(II), Co(II), Ni (II) Cu(II) and Hg(II) are prepared from the Schiff bases (L1,L2). (L1) derived from 4-aminoantipyrine and O-phenylene dia mine then (L2) derived from (L1) and 2-benzoyl benzoic acid. Structural features are obtained from their elemental microanalyses, molar conductance, IR, UV–Vis, 1H, 13CNMR spectra and magnetic susceptibility. The magnetic susceptibility and UV–Vis, IR spectral data of the ligand (L1) complexes get square–planar and tetrahedral geometries and the complexes oflig and (L2) get an octahedral geometry. Antimicrobial examinations show good results in the sharing complexes.
(17)
(2)
Abstract: Background: Staphylococcus aureus is Gram-positive bacteria that lives as a normal flora in living organisms but can be pathogenic to humans. Although a relatively unspectacular, nonmotile coccoid bacterium, S. aureus is a dangerous human pathogen in both community-acquired and nosocomial infections. Due to the increasing emergence of new strains of this antibiotic-resistant bacteria, it has become essential to approach different methods to control this pathogen. One of these methods is the antimicrobial photodynamic inactivation process using a low-level laser, in this paper, the Photodynamic effects of Rose Bengal and LLLL on the virulence factors of S.aureus were evaluated.
Abstract:
Objective: The study’s aim to evaluate the effectiveness of instructional program about healthy lifestyle on patients’ attitudes after undergoing percutaneous coronary intervention.
Methodology: Quasi-experimental design/ has been utilized for the current study starting from December 2018 to March 2020 to achieve the objectives of the study. Non-probability (purposive) sample of 60 patients was divided into intervention and control groups. Data were analyzed by the application of descriptive and inferential statistical methods.
Results: findings reported that before intervention both study and control groups demonstrated low total mean of score relat
... Show MoreBackground: Dental implants act as infrastructure for fixed restoration to look like as a natural tooth. Osseointegration is a biological events and considered as a base for success of dental implant. The aim of this study is to evaluate the bond strength between bone and Ti implant coated with mixture of nano hydroxyapatite-chitosan-collagen compared with Ti implants coated with nano hydroxyapatite implanted in rabbit tibia, after different period of implantation time (two and six weeks) by torque removal test. Material and methods: 36 screws of commercially pure titanium; 8mm in length and 3mm diameter , 18 screws coated with mixture of nano hydroxyapatite-chitosan-collagen and18 screws coated with nano hydroxyapatite by dip coating. St
... Show More
(3)
(38)
(33)
