Yamama Formation is an important sequence in southern Iraq. Petrographic analysis was used to determine and analyze the microfacies and pore types. The diagenetic processes and the impacts on the petrophysical properties of the rocks were also identified. The petrographic identification was based on data of 250 thin sections of cutting and core samples from four wells that were supplied by the Iraqi Oil Exploration Company (O.E.C). The present study focuses on the depositional environment and the microfacies analysis of Yamama Formation. The results revealed several types of microfacies, including peloidal wackestone-packstone, algal wackestone-packstone, bioclastic wackestone-packstone, foraminiferal wackestone, bioclastic wackestone, and mudstone. The latter was divided into two submicrofacies, namely argillaceous lime mudstone and sparse fossiliferous lime mudstone. The study showed that Yamama Formation was deposited through various settings within the carbonate platform; these comprise inner ramp, middle ramp, and outer ramp settings. The inner and middle ramp settings, characterized at the top and middle Formation, have high effective porosity and low clay volume, due to dominant packstone.
Shiranish Formation (Late Campanian- Maastrichtian) that cropping out north east Iraq, is studied by microfacies analysis of 52 thin section collected from Hijran Section, about 10 km west Shaqlawa Town, Governorate of Erbil. According to petrography, mineralogy and organic contents, rocks are subdivided to crystalline carbonate and microfacies units (biowackstone, packstone, and mudstone facies). Biowackstone facies have high ratio of the rock components, while the other facies have low ratio. Microfacies analysis led to relatively quiet deep marine environment.
The Mishrif Formation (Cenomanian – Early Turonian) is an important geologic formation in southern Iraq due to its petrophysical properties and geographic extensions, making it a good reservoir of hydrocarbons. Petrophysical properties of the Mishrif Formation in the current study at the Nasiriya oil field were determined from the interpretation of three open-hole logs data of (NS-1, NS-2, and NS-3) wells.
The results of the Mishrif petrophysical evaluation showed that the formation consists of five variable units (CRI, MA, CRII, MB1 and MB2), each one characterized by distinct petrophysical characteristics.
The upper (MA) and lower (MB) units were determined using electrical, porosity and gamma-ray logs. A sha
... Show MoreSedimentary structures of Gercus Formation in NE Iraq was little studied in the last decades. In this study the identified sedimentary structures display alternative graded and fining upward cycles, load and flute casts, submarine channels, sand and clay balls and pillow structures, convolute and slump beddings, of marine turbidity origin. The foreland part of Tethys basin characterized by deep marine Tanjero and Kolosh Formations followed by the Gercus formation with conformable relationships. The Eocene aged Flysch comprises predominantly litharenitic sandstones and interbedded mudstones, both of turbiditic affinities and most likely derived from a NE Arabian Plate source. The sediments provide excellent examples of distal fan sands as
... Show MoreUpper Cretaceous Oceanic Red Beds (CORBs) are pelagic sediment deposits that deposited in the Upper Cretaceous basin, with widespread in part of the world as well as in Iraq. This research investigates the deposition of cyclic marl and marly limestone CORBs of six selected sections at the active southern margin of the Tethys during the Late Campanian - Maastrichtian with petrography, microfacies, and depositional environment.
The measurement of carbonate content (CaCO3 %) in the rocks, 180 samples of all the geological sections were studied twice for each sample and the average readings were taken.
This examination proved the following major oxides wt. % concentrations domination SiO2, CaO, Al2 O3 and Fe2O3 with average values of 3
It is evident from this study that Yamama Formation is reservoir rocks and source rocks at the same time, based on occurrences of crude oil and source rocks. Bulk properties of Yamama oil in six wells as well as comparing several samples of Yamama oil by using the biological mark have indicated multi source of hydrocarbons with some pay having Jurassic and Lower Cretaceouse source affinity that belongs to the Yamama Formation.
A geochemical and environmental study was carried out for the sediments of the Southern Neo-Tethys Ocean, represented by the Yamama Formation (Berriasian-Valaganian) in southern Iraq. The formation has a particular reservoir importance. The typical WQ-220 and WQ-280 wells were selected from the West Qurna field. Data of Gamma-ray logs were used for 30 depths of the typical well. Ten core samples were analyzed by X-Ray Fluoresces and total organic matter from both wells. The results showed that shaliness was relatively low, with an average of 16.5%, leading to a decrease in the presence of clay minerals and trace elements because the environment of the Yamama Formation is relatively far away from the coast. Qualitative evaluation of clay
... Show MoreThe aim of this study is to investigate the sedimentation environments and diagenetic processes of the Ibrahim Formation (Oligocene-early Miocene) in Zurbatiya, eastern Iraq. The Ibrahim Formation is comprised mostly of clayey micrite and skeletal grains composed of planktonic foraminifera, calcispheres, radiolaria, and benthic foraminifera. Glauconite and pyrite were documented in some restricted zones of this formation; they reflect quiet and reducing conditions. Radiolaria were identified in Late-Oligocene which was not known previously at this age regionally in carbonate formations of the Arabian Plate (AP). Mudstone, wackestone, and planktonic foraminiferal wackepackstone are the main microfacies that are affected by dissolutio
... Show MoreHydrocarbon production might cause changes in dynamic reservoir properties. Thus the consideration of the mechanical stability of a formation under different conditions of drilling or production is a very important issue, and basic mechanical properties of the formation should be determined.
There is considerable evidence, gathered from laboratory measurements in the field of Rock Mechanics, showing a good correlation between intrinsic rock strength and the dynamic elastic constant determined from sonic-velocity and density measurements.
The values of the mechanical properties determined from log data, such as the dynamic elastic constants derived from the measurement of the elastic wave velocities in the material, should be more a
The present study includes the evaluation of petrophysical properties and lithological examination in two wells of Asmari Formation in Abu Ghirab oil field (AG-32 and AG-36), Missan governorate, southeastern Iraq. The petrophysical assessment was performed utilizing well logs information to characterize Asmari Formation. The well logs available, such as sonic, density, neutron, gamma ray, SP, and resistivity logs, were converted into computerized data using Neuralog programming. Using Interactive petrophysics software, the environmental corrections and reservoir parameters such as porosity, water saturation, hydrocarbon saturation, volume of bulk water, etc. were analyzed and interpreted. Lithological, mineralogical, and matrix recogniti
... Show MoreThe petroleum system of Halfaya oil field shows that the hydrocarbon generation of these Formations such as Sha′uiba and Nahr Umr are immature and have generated few oil TR ≤ 50% which are neglected as compared to Formations below them which are very rich source rock. The Formations of Yamama, Ratawi and Sulaiy are mature with TR ≤ 100%. Other Formations such as Sargelu ,Najma,Zubair and Gotnia are with very high maturity with TR ≥ 100% and completely generated hydrocarbon and depleted after hydrocarbon are expelled and migrate to reservoir rock of structure traps and this study indicates that the major seals of Upper Jurassic are Gotnia and Allan Formations and of Middle Miocene is LowerFars fatha Formation.