Preferred Language
Articles
/
ijs-3377
Simplified Flat Coordinate Model for Northern Parts of Arabian Gulf
...Show More Authors

      The method of coordinate conversion is still considered important and laborious due to the shift from the spatial ellipsoidal (geographic) to the flat planned system. The most common method uses a contiguous UTM system as one of the most reliable systems in the conversion process; however, this system faces a problem in large areas that contain more than one zone. The goal of this research is to create a simple and low computational cost model to represent a non-contiguous semi-UTM geographic coordinates for confined regions of the globe. The considered region taken in this study is the northern parts of Arabian Gulf (including parts of Iraq, Kuwait, Iran, and Saudi Arabia). The determined mathematical model was based on using two dimensional Taylor sequence. The most accurate representation met in this study was based on the 6th two dimensional polynomial. The estimation of equations’ coefficients was done using the least square criterion for the overall error of estimating coordinate values of either (latitude, longitude) or (Easting, Northing). The two basic determinations were applied for the forward and the backward; in the first step, the conversion of coordinates was calculated from the ellipsoidal coordinates (i.e., Longitude, Latitude) to UTM (WGS84) coordinates (i.e., Easting, Northing) and vice versa.

The attained results indicated that the mathematical model used is successful for achieving the conversion process. With the use of the 6th order 2D-polynomial equations, a very small error of less than 1 m was achieved in the Easting and Northing coordinates.

Scopus Crossref
View Publication Preview PDF
Quick Preview PDF
Publication Date
Wed Aug 30 2023
Journal Name
Iraqi Journal Of Science
Sedimentological, Mineralogical, and Geochemical characters of the Tigris River floodplain sediment in the Al-Alam area-Tikrit, Northern Iraq
...Show More Authors

     The mineralogical investigation, geochemical analysis, and grain size calculation were carried out for floodplain sediment in the Tigris River to identify the properties of the sediment. The average values of the three main sediment classes, very fine sand, silt, and clay are 9.67, 62.53 and 27.80%, respectively. The silt size fraction was predominant. The classification and nomenclature of surface sediment types from the floodplain of the Tigris River are sandy-silt and mud, and they are the dominant sediment. Statistical parameters of grain size analysis refer to the average of the median values 3.74 Φ very fine sand; mean in average 6.16 Φ coarse silt; standard deviation evident by average 1.30 Φ poorly sorted, skewed; in

... Show More
View Publication Preview PDF
Scopus Crossref
Publication Date
Fri Sep 30 2022
Journal Name
Iraqi Journal Of Science
Survey of Some Heavy Metals and Radioactivity in the Dust in A Selected Area in Kirkuk Governorate- Northern Iraq
...Show More Authors

      Air pollution means the release of pollutants into the atmosphere, which are harmful to human health and the planet as a whole. Almost all air pollutants come from production and energy use. In the present work, an assessment of some heavy metals, natural radioactivity and the quantity of dust fallen in three sites (Tessen, Rahemawa, and Laylan) in Kirkuk Governorate, northern Iraq. Three dust samples were collected from three locations (residential, commercial and industrial areas). The collected samples were analyzed for Cd, Cr, Cu, Ni, Pb, Zn, and radioactivity (Gamma rays). The studied heavy metals (Fe, Ni, Pb, and Zn) exceeded their limits in the atmosphere due to the increase in the number of automobiles, which

... Show More
View Publication Preview PDF
Scopus (3)
Crossref (1)
Scopus Crossref
Publication Date
Sat Feb 26 2022
Journal Name
Iraqi Journal Of Science
Field Description and Lithostratigraphic Study of Sargelu Formation in Rania and Sargelu sections, Northern Iraq: Lithostratigraphic Study of Sargelu Formation
...Show More Authors

     The Sargule Formation was deposited during the Middle Jurassic, representing one of the most important source rocks in Iraq and surrounding areas.

Jurassic successions are commonly exposed as an isolated patch at some eroded anticline’s cores and limbs in the High Folded Zone, Imbricate Zone, and Thrust Zones of northern Iraq. The Sargelu section is located in Sargelu village at Surdash anticline, while the Rania section is located in Rania city near Hanjira village at Shaweri anticline.  Fieldwork in Rania and Sargelu Sections allow to divide Sargelu Formation lithostratigraphically into many subdivisions as follow:

The Sargelu Formation in the Rania section is about 40 m and can be divide

... Show More
View Publication Preview PDF
Scopus (1)
Scopus Crossref
Publication Date
Tue Jun 01 2021
Journal Name
Ibn Al-haitham Journal For Pure And Applied Sciences
Notes on the ecology and distribution of the annual fern Anogramma leptophylla (L.) Link. (Pteridaceae) in Northern districts of Iraq
...Show More Authors

The study involved the description of the environmental characters and distribution of Anogramma  leptophylla  (Annual  Maidenhair fern)  in Erbil and Garmian districts during May- 2017 in Kurdistan of Iraq. The geographical distribution of the taxa was recorded in Bani Bee region for the first time within the Garmian district but it was recorded before in the Zar Gali region within the Erbil district. The climatic characters of the studied site in Erbil district were: moist, cold and the elevation was up to 560 m above sea level with sandy clay soil texture whereas in the Garmian district: dry, hot, and the elevation was only 330 m  above sea level with sandy stone soil. Plant up to 13 cm long, megaphyl

... Show More
View Publication Preview PDF
Crossref
Publication Date
Wed Oct 01 2014
Journal Name
Journal Of Economics And Administrative Sciences
Spatial Regression Model Estimation for the poverty Rates In the districts of Iraq in 2012
...Show More Authors

Theresearch took the spatial autoregressive model: SAR and spatial error model: SEM in an attempt to provide a practical evident that proves the importance of spatial analysis, with a particular focus on the importance of using regression models spatial andthat includes all of them spatial dependence, which we can test its presence or not by using Moran test. While ignoring this dependency may lead to the loss of important information about the phenomenon under research is reflected in the end on the strength of the statistical estimation power, as these models are the link between the usual regression models with time-series models. Spatial analysis had

... Show More
View Publication Preview PDF
Publication Date
Tue Jan 31 2023
Journal Name
Iraqi Geological Journal
Geological Model for Jeribe/Euphrates Formation, Tertiary Reservoir in Qaiyarah Oil Field, North of Iraq
...Show More Authors

Visualization of subsurface geology is mainly considered as the framework of the required structure to provide distribution of petrophysical properties. The geological model helps to understand the behavior of the fluid flow in the porous media that is affected by heterogeneity of the reservoir and helps in calculating the initial oil in place as well as selecting accurate new well location. In this study, a geological model is built for Qaiyarah field, tertiary reservoir, relying on well data from 48 wells, including the location of wells, formation tops and contour map. The structural model is constructed for the tertiary reservoir, which is an asymmetrical anticline consisting of two domes separated by a saddle. It is found that

... Show More
View Publication Preview PDF
Crossref
Publication Date
Sat Jan 01 2011
Journal Name
Iraqi Journal Of Physics
Calculation of Particle Emission Rates for Nucleon-Induced Reactions with non-Equidistance Spacing Model Dependence
...Show More Authors

Nuclear emission rates for nucleon-induced reactions are theoretically calculated based on the one-component exciton model that uses state density with non-Equidistance Spacing Model (non-ESM). Fair comparison is made from different state density values that assumed various degrees of approximation formulae, beside the zeroth-order formula corresponding to the ESM. Calculations were made for 96Mo nucleus subjected to (N,N) reaction at Emax=50 MeV. The results showed that the non-ESM treatment for the state density will significantly improve the emission rates calculated for various exciton configurations. Three terms might suffice a proper calculation, but the results kept changing even for ten terms. However, five terms is found to give

... Show More
View Publication Preview PDF
Publication Date
Thu Apr 27 2017
Journal Name
Ibn Al-haitham Journal For Pure And Applied Sciences
The Study of A Improve Model For The D-D Nuclear Fusion Reaction Cross Section
...Show More Authors

     The study of improved model for measuring the total nuclear fusion cross section characteristics  the D-D reaction may play an important role in deciding  or determining the hot plasma parameters such as mean free path , the reaction rate , reactivity and energy for emitted neutrons or protons in our work we see the it is necessary to modify the empirical formulas included the total cross section in order to arrive or achieve good agreement with the international publish result.    

View Publication Preview PDF
Publication Date
Wed Dec 26 2018
Journal Name
Iraqi Journal Of Science
Statistical Study of Nuclear Energy Levels for 6 Particles in The Nuclear N82 Model Space
...Show More Authors

View Publication Preview PDF
Publication Date
Sun Jul 31 2022
Journal Name
Iraqi Journal Of Science
Mathematical Analysis of Peristaltic Pumps for Fene-P model subject to Hall and Joule impact
...Show More Authors

    A mathematical model is developed to discuss the impact of the Hall current and the Joule heating on the peristaltic flux of finitely extensible nonlinear elastic Peterlin (FENE-P) fluid in a tapered tube with mild stenosis. The fluid movement  along the wall surface resulted from the sinusoidal wave flowing with constant speed. Conditions of velocity and thermal slip are applied. Lubrication approximation is adopted to modify the governing flow problem. To discover the solution to a system of equations, the regular perturbation approach is used. The effects of the different physical parameters are debated and graphically shown in a set of figures. It is discovered that as the Hall current parameter is increased and the Hartman n

... Show More
View Publication Preview PDF
Scopus (3)
Crossref (1)
Scopus Crossref