Geophysical and petrographic evaluation of the earth’s subsurface is of vital concern, especially prior to geotechnical and hydrogeology works. Vertical Electrical Sounding (VES) of Ire-Akari Estate of Apatapiti Community in Akure South was carried out to assess the effects of the petrographic properties of charnockitic rocks on the geotechnical and hydrogeologic systems. The three curve types identified within the study area are AA, KH and HA, with a predominance of KH curve type, which suggests that the predominant geologic sequence comprising the topsoil has a clayey content alternating with laterite. This is underlain by weathered layer and fresh bedrock. Petrographic analyses revealed the presence of plagioclase (Albite-Anorthite), hypersthene, biotite, quartz, hornblende, microcline, pyroxene and dark-coloured minerals, with an average modal composition of 31%, 15%, 11%, 18%, 13%, 1%, 5% and 6%, respectively. A correlation of both results showed that the topsoil is mostly of about 0.4 m to 2 m thick layer of clay, indicative of weathering of feldspars. This is underlain by 0.8 m to 7 m thick layer of lateritic clay which responds as a low resistive layer. However, the mineral composition at location 1 is characterized by rocks that are more resistant to weathering due to the presence of low plagioclase in the rock sample compared to samples from other locations with a higher percentage of plagioclase and hypersthene minerals. This implies that weathering condition at all locations except location 1 could be favorable to hydrogeology if there are interconnected fractures in the parent rock (charnockite). However, since the area is predominantly covered by clayey materials which are established as poor foundational materials, appropriate ground improvement techniques and in-depth geotechnical analyses should be performed to forestall hazards associated with them.
The proton, neutron and matter density distributions, the corresponding size radii and elastic electron scattering form factors of one-proton8B and two-proton 17Ne halo nuclei are calculated. The theoretical technique used to fulfill calculations is by assuming that both nuclei under study are composed of two main parts; the first is the compact core and the second is the unstable halo part. The single-particle radial wavefunctions of harmonic-oscillator (HO) and Woods-Saxon (WS) potentials are used to study core and halo parts, respectively. And other approach is studied by using HO potential for both core and halo parts, but using two HO size parameters for both supposed parts. The long ta
... Show MoreBackground: The coronary atherosclerosis received a great concern from the clinical aspect, but its pathological aspect is deficient in Iraq.
Objectives: To find a correlation between the type of the lesions that were grossly identified and their corresponding microscopical grades and Studying the effect of remodeling on preservation of the luminal area, 3) demonstrate the endothelial dysfunction in atherosclerosis.
Methods: fifty cases were gathered from the Medico-legal institute in Baghdad during the period from January to July 2004.The left anterior descending (LAD), left circumflex (LCX) and right coronary artery (RCA) from 50 postmortem cases were biopsied.
... Show MoreAN Salih, LO Hamza, Ann. For. Res, 2022 - Cited by 2
Background: The integration of modern computer-aided design and manufacturing technologies in diagnosis, treatment planning, and appliance construction is changing the way in which orthodontic treatment is provided to patients. The aim of this study is to assess the validity of digital and rapid prototyped orthodontic study models as compared to their original stone models. Materials and methods: The sample of the study consisted of 30 study models with well-aligned, Angle Class I malocclusion. The models were digitized with desktop scanner to create digital models. Digital files were then converted to plastic physical casts using prototyping machine, which utilizes the fused deposition modeling technology. Polylactic acid polymer was chose
... Show MoreThe increasing requirement and use of dental implant treatments has rendered dental implantology indispensable in dentistry. The aim of this study is to determine the optimum concentration of calcium silicate to be incorporated into a polyetherketoneketone (PEKK) matrix used as an implant material to enhance the bioactivity and mechanical properties of the composite compared with unmodified PEKK. In this study, different weight percentage (wt%) of micro-calcium silicate (m-CS) is incorporated into PEKK with ethanol as a binder. Subsequently, the mixture is dried in a forced convection oven at 120°C and poured into customized molds to fabricate a bioactive composite via compression molding (310°C, 15 MPa, and 20 min holding time
... Show MoreIn this study, investigations of structural properties of n-type porous silicon prepared by laser assisted-electrochemical etching were demonstrated. The Photo- electrochemical Etching technique, (PEC) was used to produce porous silicon for n-type with orientation of (111). X-ray diffraction studies showed distinct variations between the fresh silicon surface and the synthesized porous silicon surfaces. Atomic force microscopy (AFM) analysis was used to study the morphology of porous silicon layer. AFM results showed that root mean square (RMS) of roughness and the grain size of porous silicon decreased as etching current density increased. The chemical bonding and structure were investigated by using fourier transformation infrared spec
... Show MoreIn this study, thermal characteristics of a two-phase closed heat pipe were investigated experimentally and theoretically. A two-phase closed heat pipe (copper container, Fluorocarbon FC-72 (C6F14) working fluid) was fabricated to examine its performance under the effect of input heat flux range of 250–1253 W/m2 , 70% fill charge ratio and various tilt angles. The temperature distribution along the heat pipe, input heat to evaporator section, and output heat from condenser were monitored. A comprehensive mathematical model was developed to investigate the steadystate heat transfer performance of a two-phase closed heat pipe. A steady state analytical model, is presented to determine important parameters on the design of two-phase close
... Show MoreIn recent years, the need for Machine Translation (MT) has grown, especially for translating legal contracts between languages like Arabic and English. This study primarily investigates whether Google Translator can adequately replace human translation for legal documents. Utilizing a widely popular free web-based tool, Google Translate, the research method involved translating six segments from various legal contracts into Arabic and assessing the translations for lexical and syntactic accuracy. The findings show that although Google Translate can quickly produce English-Arabic translations, it falls short compared to professional translators, especially with complex legal terms and syntax. Errors can be categorized into: polysemy,
... Show More