A new, simple, accurate, fast and sensitive spectrophotometric method has been
developed for the analysis of Pyrocatechol, Resorcinol, and pyrogallolin pure
commercial samples by continuous flow injection analysis. The method was based on
the oxidation of the organic compounds with Ce(IV)sulfate in acidic medium to
formed a brown colored species which determined using homemade Ayah 3SBGR x3-
3D solar cell flow injection microphotometer. Optimum conditions were obtained
using a high intensity green light emitted diode as an irradiation source
forPyrocatechol, Resorcinol, whileblue light emitted diode as an irradiation source for
pyrogallol. The linear dynamic range for the instrument response versus Pyrocatechol,
Resorcinol, and pyrogallol concentrationswere5-40mmol.L-1 while the L.O.D was of
36.63, 17.17, and 41.61ng / sample respectively. The correlation coefficient (r) was
0.9952, 0.9970, and 0.9960 while percentage linearity (r2%) was 99.05%, 99.41% and
99.22%forPyrocatechol, Resorcinol, and pyrogallol respectively. RSD% for the
repeatability (n=8,7, and 8) was 1.4%, 0.63%, 1.78% for the determination of
Pyrocatechol, Resorcinol,andpyrogallol, respectively at concentration of 30 mmol.L-1.
The method was applied successfully for the determination of three organic
compounds in purecommercial samples. A comparison was made between the newly
developed method and the classical method (UV-Vis spectrophotometry) at wave
length 492, 481, and 438 nm forPyrocatechol, Resorcinol and pyrogallolrespectively
of analysis using the standard additions method via the use of paired t-test. It was
noticed that there is no significant difference between two different methods for
analysis three different organic compounds; in addition to no significant difference in
the contribution of the Pyrocatechol, Resorcinol and pyrogallol to the oxidant reaction
path, at 95% confidence level.
Estimations of specific activity concentrations in eight commercial porcelain tiles made in different countries were performed by the use of HPGe detector. We have found that the highest specific activity concentrations for 238U, 40K were equal to (21.120 Bq/kg) and (283.862 Bq/kg) respectively, Iranian origin, while the highest specific activity concentration for 232Th was found to be equal to (29.292 Bq/kg), Iraqi origin; all of which were less than their corresponding recommended values given by (UNSCEAR, 2000). The radiation hazard indices [IÉ£ , Hin ,Hex , Raeq ,DÆ” , (AEDE) in and (AEDE) out] w
... Show MoreVisceral leishmaniasis (VL), the second-most-serious parasitic illness after malaria, is currently endemic in more than 88 countries. Need for new anti-leishmanial compounds is currently being taken into consideration by researchers due to resistance and lack of effective vaccinations. This research was conducted to find out more about the effect of artemisinin (ART). ART was examined in vitro promastigotes stages and ex vivo amastigotes stages of the Iraqi strain of Leishmania donovani in U937 cell line after 24, 48 and 27 hours using MTT assay. In addition, the level of macrophage nitric oxide (NO) was measured using Griess assay in U937 cell line. The results of promastigotes viability percentage
... Show MoreIn this study, cloud point extraction combined with molecular spectrometry as an eco-friendly method is used for extraction, enrichment and determination of bendiocarb (BC) insecticide in different complex matrices. The method involved an alkaline hydrolysis of BC followed Emerson reaction in which the resultant phenol is reacted with 4-aminoantipyrene(4-AAP) in the presence of an alkaline oxidant of potassium ferric cyanide to form red colored product which then extracted into micelles of Triton X-114 as a mediated extractant at room temperature. The extracted product in cloud point layer is separated from the aqueous layer by centrifugation for 20 min and dissolved in a minimum amount of a mixture ethanol: water (1:1) followed
... Show MoreA method was developed that offers a rapid, simple and accurate technique for the determination of chlorophenols at trace levels in aqueous samples with very limited volumes of organic solvents. These compounds were acetylated, then preliminarily extracted with n-hexane. The enriched chlorophenols were directly analyzed using gas chromatography with an electron-capture detector. The detection limits were in the range of 0.001–0.005 mg/L, except for 2-chlorophenol, which was always above 0.013 mg/L. Relative standard deviation for the spiked water samples ranged from 2.2 to 6.1%, while relative recoveries were in the range of 67.1 to 101.3%.
A simple, rapid and environmentally friendly dispersive liquid–liquid microextraction method-based spectrophotometric method for the trace determination of folic acid has been developed. The proposed method is based on the formation of a deep yellow product via reaction of folic acid and 1,2-naphthoquine-4-sulfonate at pH = 9. The formed complex was extracted using a mixture of chloroform and ethanol. Then, the tiny organic droplets were measured at λ = 520 nm. At the optimum conditions, linearity was ranged from 0.05 to 1.5 μg/mL for the standard and samples, with a linear correlation coefficient of 0.9996. The detection limits were 0.02, 0.027, 0.03, 0.02 and 0.04 μg/mL for standard, tablet (5 mg), tablet (1 mg), syrup and fl
... Show MoreBackground: targeted cancer nanotherapy represents a golden goal for nanobiotechnology to overcome the severe side effects of conventional chemotherapy. Hybrid nanoliposomes (HLs) composed of L-α-dimyristoylphosphatidylcholine (DMPC) and Polyoxyethylene (23) dodecyl ether (C12 (EO)23 ) can integrate selectively into the cancer cell membrane inducing cancer cell death.
Objectives: to assess the capacity of locally (in hose) synthesized hybrid nanoliposome to inhibit the growth of cervix cancer cells (HeLa) and induce apoptosis.
Patients and Methods: hybrid nanoliposomes(nHLs) synthesized by sonication method from a mixture of 90% mol DMPC and 10% mol C12(EO)23 in tissue culture media RPMI-1640 for 6 hours at 300W and 40ºC then fil
A simple, accurate and sensitive spectrophotometric method for the determination of Procaine penicillin (PP) is described. The method is based on charge-transfer reaction of PP with metol (N-methyl-p-hydroxy aniline) in the presence of ferric sulphate to form a purple-water soluble complex ,which is stable and has a maximum absorption at 510 nm .A graph of absorbance versus concentration shows that Beer’s low is obeyed over the concentration range of 3-80 µg /ml of PP (i.e.,3-80 ppm) with a molar absorbativity of 4.945 ×103 L.mol-1.cm-1 ,Sandell sensitivity of 0.1190 µg cm-2 ,a relative error of (-1.57)-2.79 % and a standard deviation of less than 0.59 depending on the concentration of PP.The optimum conditions for full co
... Show MoreThis study aimed to evaluate the anticancer activity and cell division arresting by dandelion methanolic extract on breast cancer cell line MCF-7 cancer cell line. For achieving this goal, cytotoxicity assay (MTT assay), multipara system assay: High Content Screening (HCS) which include (viable cell count VCC; membrane permeability MP; cellular mitochondrial permeability CMP; nuclear intensity NI and cytochrome C releasing ), reactive oxygen species detection and cell cycle phases division were tested. The results of this study showed the ability of the plant to reduce cancer cell viability in a dose-dependant manner within IC50 (141.0) in comparison to IC50 of (334.4) on the
... Show MoreMicrobial Desalination Cell (MDC) is capable of desalinating seawater, producing electrical power and treating wastewater. Previously, chemical cathodes were used, which were application restrictions due to operational expenses are quite high, low levels of long-term viability and high toxicity. A pure oxygen cathode was using, external resistance 50 and 150 k Ω were studied with two concentrations of NaCl in the desalination chamber 15-25 g/L which represents the concentration of brackish water and sea water. The highest energy productivity was obtained, which amounted to 44 and 46 mW/m3, and the maximum limit for desalination of saline water was (31% and 26%) for each of 25 g / L and 15 g / L, respectively, when using an ex
... Show More