Iron-Epoxy composite samples were prepared by added
different weight percentages (0, 5, 10, 15, and 20 wt %) from Iron
particles in the range of (30-40μm) as a particle size. The contents
were mixed carefully, and placed a circular dies with a diameter of
2.5 cm. Different mechanical tests (Shore D Hardness, Tensile
strength, and Impact strength ) were carried out for all samples. The
samples were immersed in water for ten weeks, and after two weeks
the samples were take-out and drying to conducting all mechanical
tests were repeated for all samples. The hardness values increased
when the Iron particle concentration increased while the Impact
strength is not affected by the increasing of Iron particles
concentration. The tensile strength results reveal that the tensile
strength and the strain values of composite samples decreases when
the Iron particles concentration increase. After conducted
immersion processes the results of hardness are reduced wears the
results of tensile strength and the impact strength are increased.
Christianity rejected abortion, since its inception, it took a luck against abortion, although there is no mention of it in the Bible, as there is no explicit text for abortion in the Old or New Testament and that the early Christians considered abortion a sin in all stages, and beliefs included abortion as an act of murder. What is forbidden in the Ten Commandments is “Thou shalt not kill”, and it is understood that killing here is either plundering one’s personal life (suicide) or stealing another person’s life (killing), or stealing the life of a person who has not yet been born (aborting fetuses). Based on the above, it was necessary for individuals to search for (Abortion in the Christian Religion / Descriptive Study) The resea
... Show MoreThe semantic analysis is characterized by its ability to describe the communicative pattern and its high efficiency in questioning its semantic manifestations and its deliberative purposes, which helped to understand the symbolic, contextual and cultural manifestations of the structure of the pattern, whether verbal or nonverbal. In order to highlight the role of the semiautomatic approach and its application to a sample of slogans collected from "media, social networking sites, in-kind views, media institutions, etc." to study the components and analyze the contents and highlight the signs. His boat logo is not just uttered as a linguistic transmission of a message, but as a political Tghieria actually . For example, the slogan "People Wan
... Show MoreOut of the search for the truth, the reader of the Holy Qur’an should know the fate of the sorcerers whom Pharaoh threatened when they announced it as pure monotheism in front of seeing the stick as it turned into a clear serpent, when they said: We believe in the Lord of the worlds, the Lord of Moses and Aaron, and the clear promise came to cut and crucify the trunks of palm trees, and they said what they said if Being supplicants to God (May God cause us to die as Muslims), did Pharaoh actually carry out what he promised them?? So we studied that subject from this angle. Because what looms on the horizon of the Holy Qur’an is that there is no one who seeks refuge with God Almighty in times of adversity except that God Almighty has
... Show MoreThe definition of "prostitute" and prostitution is a difficult one and a
question over which the legislators of many lands and nations differed. A
notable feature of prostitution is its epidemic increase at times of war,
revolution and armed commotion, on account of economic, social and
psychological factors generated by such conditions of mortal conflicts. Wars
invariably deprive young wives and lovers of their men folk, resulting in
financial , sexual and emotional frustrations . At no time is the natural
balance between the sexes more seriously disturbed than during wars, when
thousands of men are thrown into one sector of the country and hundreds of
towns and villages are left to women and children only. Lo
Polyaniline membranes of aniline were produced using an electrochemical method in a cell consisting of two poles. The effect of the vaccination was observed on the color of membranes of polyaniline, where analysis as of blue to olive green paints. The sanction of PANI was done by FT-IR and Raman techniques. The crystallinity of the models was studied by X-ray diffraction technique. The different electronic transitions of the PANI were determined by UV-VIS spectroscopy. The electrical conductivity of the manufactured samples was measured by using the four-probe technique at room temperature. Morphological studies have been determined by Atomic force microscopy (AFM). The structural studies have been measured by (SEM).
The properties of structural and optical of pure and doped nano titanium dioxide (TiO2) films, prepared using chemical spray pyrolysis (CPS) technique, with different nanosize nickel oxide (NiO) concentrations in the range (3-9)wt% have been studied. X-Ray diffraction (XRD) technique where using to analysis the structure properties of the prepared thin films. The results revealed that the structure properties of TiO2 have polycrystalline structure with anatase phase. The parameters, energy gap, extinction coefficient, refractive index, real and imaginary parts were studied using absorbance and transmittance measurements from a computerized ultraviolet visible spectrophotometer (Shimadzu UV-1601 PC) in the wavelength
... Show MoreBackground: Polymer surfaces usually present problems in bonding and finishing due to their low hydrophilicity. The aim of this study is to investigate the effect of plasma treatment with the use of two types of gases (oxygen and argon) on surface roughness, and chemical surface properties of acrylic resin denture base polymer material. Materials and Methods: Three heat cured acrylic resin specimens of (2*8*30 mm) dimensions were prepared for each test carried out in this study. Two tests were conducted, surface roughness test and chemical surface analysis test. Results: Application of plasma treatment increased surface roughness for both oxygen and argon plasma treated acrylic resin specimen groups compared with control untreated group,
... Show MoreDuring the last quarter century, many changes have taken place in the tanks industry and also in the materials that used in its production، while concrete is the most suitable material where concrete tanks has the benefits of strength, long service life and cost effectiveness. So, it is necessary improvement the
conventional concrete in order to adapt the severe environment requirements and as a result high
performance concrete (HPC) was used. It is not fundamentally different from the concrete used in the past, although it usually contains fly ash, ground granulated blast furnace slag and silica fume, as well as
superplasticizer. So, the content of cementitious material is high and the water/cement ratio is low. In this
stu
Background: Polyetheretherketone (PEEK) is a promising implant material due to its superior biomechanical strength. However, due to its hydrophobic nature and lack of cellular adhesion properties, it has poor integration with bone tissue. Methods: A fractional CO2 laser was used with various parameters for surface texturing of PEEK substrate to enhance its surface properties. An optical microscope and field-emission scanning electron microscope (FESEM) were used to examine the surface morphology of untextured and laser-textured samples. Energy dispersive X-ray spectroscopy (EDX) was performed to determine the effect of the laser on the microstructure of PEEK. Surface microroughness, atomic force microscopy (AFM), and wettability were invest
... Show MoreThe dielectric constant of most polymers is very low; the addition of TiO2 particles into the polymers provides an attractive and promising way to reach a high dielectric constant. Polymer-based materials with a high dielectric constant show great potential for energy storage applications. Four samples were prepared, one of them was polyurethane (PU) and the other were PU with different weight percent (wt %) of TiO2 (0.1, 0.2, 0.3) powder AFM test was used to distinguish the nanoparticles. The result shows that the most shape of these nanoparticles are spherical and the roughness average is 0.798 nm. The dielectric properties were measured for all samples before and after the exposure to the UV radiation. The result illustrates that the
... Show More