Carbonate matrix stimulation technology has progressed tremendously in the last decade through creative laboratory research and novel fluid advancements. Still, existing methods for optimizing the stimulation of wells in vast carbonate reservoirs are inadequate. Consequently, oil and gas wells are stimulated routinely to expand production and maximize recovery. Matrix acidizing is extensively used because of its low cost and ability to restore the original productivity of damaged wells and provide additional production capacity. The Ahdeb oil field lacks studies in matrix acidizing; therefore, this work provided new information on limestone acidizing in the Mishrif reservoir. Moreover, several reports have been issued on the difficulties encountered during the stimulation operation of the Ahdeb oil field, particularly for the development of the Mishrif reservoir. Since the new core flooding system is built to operate safely and straightforwardly. This study introduced the results of Matrix acidizing experiments, covering the most recent developments in linear core flooding. High-permeability flow pathways are created, and a longer and wider wormhole was generated at a high acid injection rate (6.67 cc/min). The acid efficiency curve yielded the lowest pore volume injected at the breakthrough of the PV_(bt-opt) is 2.73 and the v_(i-opt)=0.6 cm/min; thus, the optimum injection rate that results in an optimal possible wormhole and the least quantity of acid being used for this reservoir is 2.16 cc/min. This research evaluated the impact of matrix acidizing treatment on acoustic characteristics, which studies show are lacking or have never been investigated previously. Furthermore, in the assessment of geomechanical rock properties and elastic and petrophysical parameters before and after acid injection, one of the new concepts discovered during the lab experiment observation of the acoustic waveform before and after acid treatment for the tested rock sample is that the initial arrival time before acid treatment is 21.6 microseconds, with a delay of 31.2 microseconds attributed to the wormhole channel and mineral disintegration. CT-Scan applications in matrix acidizing were investigated in this research; additionally, a 3D view of plug samples was constructed to represent the wormhole extension via CT-processing software. A license of Stimpro Stimulation Software has been used to validate the experimental work to the field scale, making it the most comprehensive instrument for planning and monitoring matrix acid treatment and utilizing actual data to provide a far better knowledge of the well's reaction, with methods that represent the reality of what is happening in the reservoir before, during, and after matrix acid treatments, through the post-treatment skin factor which is the most often utilized statistic for analyzing stimulation treatments and relies on the geometry of the wormholed zone. The acid treatment evaluated for the well AD-12, primarily for the zone Mi4; matrix acid treatments can have their production behavior predicted or matched using the reservoir simulation and production analysis option, employing the numerical simulation license software Petrel (Schlumberger) and Rubis (KAPPA) to determine the efficacy of previous treatments and the economics associated with future treatments. The estimated oil gain volume and percentage for the Mi4 unit in Ad-12 using particularly skin value -3.97 computed from Stimpro software for real stimulation acid job, it is yield enhancement in production of oil gain volume 6154 barrels as well as 105% increase of gain percentage for three months after matrix acidizing.
Assessment of annual wind energy potential for three selected sites in Iraq has been analyzed in the present work. The wind velocities data from August 2014 to July 2015 were collected from the website of Weather Underground Organization (WUO) at stations elevation (35m, 32m, and 17m) for Baghdad, Najaf, and Kut Al-Hai respectively. Extrapolation of stations elevation and wind velocities was used to estimate wind velocities at (60m, 90m, and 120m). The objectives are to analyze the wind speed data and assess the wind energy potential for wind energy applications. Computer code for MATLAB software has been developed to solve the mathematical model. The results are presented as a monthly and annual average for wind velocities, standard deviat
... Show More
(1)
Electro-chemical Machining is significant process to remove metal with using anodic dissolution. Electro-chemical machining use to removed metal workpiece from (7025) aluminum alloy using Potassium chloride (KCl) solution .The tool used was made from copper. In this present the optimize processes input parameter use are( current, gap and electrolyte concentration) and surface roughness (Ra) as output .The experiments on electro-chemical machining with use current (30, 50, 70)A, gap (1.00, 1.25, 1.50) mm and electrolyte concentration (100, 200, 300) (g/L). The method (ANOVA) was used to limited the large influence factors affected on surface roughness and found the current was the large influence f
... Show MoreNuclear emission rates for nucleon-induced reactions are theoretically calculated based on the one-component exciton model that uses state density with non-Equidistance Spacing Model (non-ESM). Fair comparison is made from different state density values that assumed various degrees of approximation formulae, beside the zeroth-order formula corresponding to the ESM. Calculations were made for 96Mo nucleus subjected to (N,N) reaction at Emax=50 MeV. The results showed that the non-ESM treatment for the state density will significantly improve the emission rates calculated for various exciton configurations. Three terms might suffice a proper calculation, but the results kept changing even for ten terms. However, five terms is found to give
... Show MoreObjectives: to assess nurses' knowledge toward infection control measures for hepatitis a virus in hemodialysis
units and to detemine the relationship between nurses' knowledge and their demographical characteristics.
%eihs:::°mg:rA5th:e;:#tt£:eoscTodbyerw9¥,C22;5];e.d°utathem°dialysisunitsofBaghdadTeachingHospha|sstated
A non-probability `tturposive" sample of (51) nurses, who were working in hemodialysis units were selected
from Baghdad teaching hosphals. The data were collected through the use of constructed questionnaire, which
consists of two parts (I) Demographic data fom that consists of 10 items and (2) Nurses' knowledge form that
consists of 6 sections contain 79 items, by means of direct interview techniq
Art of legend was arisen out of pillars of theatre which casts light on those legends that were written to glorify powers and situations surpass level of human beings . So we find that legend was transformed through its doctrine sides over level of concept and realization on field of subjects where by which Greek theatre was founded . As soon as it was adopted by drama art as legendary ritual phenomena with its stories . With that modes of social , spiritual expressions were differentiated within communities , peoples over all different countries and civilizations . This explains us the apparent difference in cases of legends , alike if they were within thoughtful , social or cultural sides between civilizations . Since drama art is mirr
... Show More
Objective: To evaluate nurses' practices concerning isolation techniques for Adult Leukemic Patients (ALP).
Methodology: A descriptive study was carried out at the isolation rooms at leukemic wards in Baghdad Teaching
Hospitals, starting from Jan. 27th 2008 up to the 27th of Apr. 2008. To achieve the objectives of study, a non-probability
"purposive" sample of (50) nurse was selected out of four Teaching Hospitals in Baghdad city were selected according
to the criteria of the study sample.
The study instrument consisted of two major parts. It is based on the review of literature. First is concerned with
demographic data for nurses; and the second part is observational tool (checklist) is composed of (83) item. The conte
Modern automation robotics have replaced many human workers in industrial factories around the globe. The robotic arms are used for several manufacturing applications, and their responses required optimal control. In this paper, a robust approach of optimal position control for a DC motor in the robotic arm system is proposed. The general component of the automation system is first introduced. The mathematical model and the corresponding transfer functions of a DC motor in the robotic arm system are presented. The investigations of using DC motor in the robotic arm system without controller lead to poor system performance. Therefore, the analysis and design of a Proportional plus Integration plus Divertive (PID) controller is illustrated.
... Show More
(7)
(4)
(23)
Objective : The study was carried out to construct an initial assessment documentation tool for nursing
recording system in Coronary Care Unit.
Methodology : A descriptive, purposive sample of (65) nurses was selected from CCU of main
teaching hospitals (Al Karama, Al Kindy, Al Kadimia, Al Yarmmok, Baghdad teaching hospital, Ibn
Al Naffis hospital) and Ibn-Al betar hospital in Baghdad city from the 15th of April 2004 to the 15th of
April 2006.
The instrument was constructed and comprised of two sections: section one included the
nurses' demographic characteristic; section two was the initial assessment documentation tool that
contained (2) parts including: General information form and the initial assessment form.
(31)
(24)