Preferred Language
Articles
/
alkej-105
Effect of Construction Joints on Performance of Reinforced Concrete Beams
...Show More Authors

Construction joints are stopping places in the process of placing concrete, and they are required because in many structures it is impractical to place concrete in one continuous operation. The amount of concrete that can be placed at one time is governed by the batching and mixing capacity and by the strength of the formwork. A good construction joint should provide adequate flexural and shear continuity through the interface.

In this study, the effect of location of construction joints on the performance of reinforced concrete structural elements is experimentally investigated.

Nineteen beam specimens with dimensions of 200×200×950 mm were tested. The variables investigated are the location of the construction joints (at midspan or at third point of the specimens), type of construction joints (vertical, inclined, and key construction joints), and presence of stirrups at these joints. The specimens were tested using 1000 kN computer controlled versatile electronic testing machine. The specimens were positioned in the machine so that the deflection at center and\or at the location of construction joint was measured at each load step.

The results of the experimental program indicated that the best location of the construction joint is at the point of minimum shear. It was found that the use of vertical construction joint has little effect on the overall behavior of beam specimens (the percentage of reduction in ultimate load capacity is in the range of 0% - 5%).

While inclined construction joints results in a noticeable reduction in strength of beams relative to the strength of beam without construction joint the percentage of reduction in ultimate load capacity is in range of 8% - 20%.The presence of stirrups at the construction joints is an important variable, which affect the type of failure and load carrying capacity. It is found that adding of stirrups across the joint results in an increase in capacity in the range of (7%- 15%) and a decrease in deflection in the range of (20%- 48%).

View Publication Preview PDF
Quick Preview PDF
Publication Date
Wed May 10 2023
Journal Name
Journal Of Engineering
ADSORPTION STUDY OF HYDRODESULPHURIZATION CATALYST
...Show More Authors

Physical and chemical adsorption analyses were carried out by nitrogen gas using ASTM apparatus at 77 K
and hydrogen gas using volumetric apparatus at room temperature respectively. These analyses were used for
determination the effect of coke deposition and poisoning metal on surface area, pore size distribution and
metal surface area of fresh and spent hydrodesulphurization catalyst Co-Mo\Al2O3 .
Samples of catalyst (fresh and spent) used in this study are taken from AL-Dura refinery.
The results of physical adsorption shows that surface area of spent catalyst reduced to third compare with
fresh catalyst and these catalysts exhibit behavior of type four according to BET classification ,so, the pores
of these sample

... Show More
View Publication Preview PDF
Crossref
Publication Date
Wed Jan 02 2019
Journal Name
Journal Of Educational And Psychological Researches
Reflective Judgment of University Students
...Show More Authors

This research aims at identifying the level of Reflective Judgment for University students in term of gender and stage. To this end, the researcher used Khaleel's scale (2016) for the Reflective Judgment. The scale was administered to the sample of the study which is (200) male and female level first-fourth university students. The results have shown that university students are on the level five of the Reflective Judgment, and the first-stage students have reflective judgment more than fourth-stage students. In the light of these results, the researcher has come with a number of recommendations and suggestions.     

View Publication Preview PDF
Publication Date
Thu Dec 01 2011
Journal Name
Journal Of Engineering
SIMULATION OF FLIGHT THROUGH GUST
...Show More Authors

A flight simulation programme has been developed on a personal computer using Microsoft
FORTRAN to simulate flight trajectories of a light aircraft by using Six-Degree-of-Freedom
equation of motion. The simulation has been made realistic through pre-programmed the input to
the control surfaces, atmospheric gust during the flight mode. The programme plays an important
role in the evaluation and validation of the aircraft design process. A light aircraft (Cessna 182T)
has been tested through free flight, gliding flight, flight with gust. The results show good trend and
show that the programme could be dependent as a realistic flight test programme.

View Publication Preview PDF
Crossref
Publication Date
Tue Jun 01 2010
Journal Name
Al-khwarizmi Engineering Journal
Kinetic Study of Esterification Reaction
...Show More Authors

The Esterification kinetics of acetic acid with ethanol in the presence of sulfuric acid as a homogenous catalyst was studied with isothermal batch experiments at 50-60°C and at a different molar ratio of ethanol to acetic acid [EtOH/Ac]. Investigation of kinetics of the reaction indicated that the low of [EtOH/Ac] molar ratio is favored for esterification reaction, this is due to the reaction is catalyzed by acid. The maximum conversion, approximately 80% was obtained at 60°C for molar ratio of 10 EtOH/Ac. It was found that increasing temperature of the reaction, increases the rate constant and conversion at a certain mole ratio, that is due to the esterification is exothermic. Activity coefficients were calculated using UNIFAC progra

... Show More
View Publication Preview PDF
Publication Date
Fri Jan 01 2021
Journal Name
Journal Of Clinical And Diagnostic Research
Prenatal Markers of Foetal Complications
...Show More Authors

Prenatal markers are commonly used in practice to screen for some foetal abnormalities. They can be biochemical or ultrasonic markers in addition to the newly used cell free Deoxyribonucleic Acid (DNA) estimation. This review aimed to illustrate the applications of the prenatal screening, and the reliability of these tests in detecting the presence of abnormal chromosomes such as trisomy-21, trisomy-18, and trisomy-13 in addition to neural tube defects. Prenatal markers can also be used in the anticipation of some obstetrical complications depending on levels of these markers in the mother’s circulation. In the developed countries, prenatal screening tests are regularly used during antenatal care period. Neural tube defects, numer

... Show More
View Publication
Clarivate Crossref
Publication Date
Mon Apr 04 2022
Journal Name
Journal Of Educational And Psychological Researches
Self-Regulation of University Students
...Show More Authors

The current research aims to identify the self-regulation of university students, as well as to identify the significance of the difference in self-regulation according to the variable of sex (male-female), specialization (scientific-human), and grade (first-fourth). To achieve the research objectives, the two researchers developed a scale of (28) items about self-regulation According to the theory of (Pandora, 1991). The scale was administered to (500) students from the first and fourth stages of Al -Mustansiriyah University who were selected based on the random stratification method for the 2020/2021 academic year. The results showed that university students have a good level of self-regulation. There are no significant differences in

... Show More
View Publication Preview PDF
Publication Date
Mon Oct 01 2018
Journal Name
Journal Of Educational And Psychological Researches
Educational goals of Quranic proverbs
...Show More Authors

The research sought to know the educational goals of Quranic proverbs, The first chapter: includes general terms of research, its problem, its importance, its objectives, its methodology, and the definition of terms. In the second chapter: Proverbs in Quranic usage such as simple and complex proverbs, standard proverbs, In the third chapter, the educational objectives of the Quranic proverbs include: bringing the meaning, persuasion, thought provoking ..... the educational characteristics of the Koranic verses, including: accuracy of photography, and the truth of similar, and included the lesson applied lesson, Chapter fourth : Conclusions and Recommendations with abstra

... Show More
View Publication Preview PDF
Publication Date
Fri Mar 30 2001
Journal Name
Iraqi Journal Of Chemical And Petroleum Engineering
Scale-Up of Eelectrochemical Reactors
...Show More Authors

View Publication Preview PDF
Publication Date
Wed May 01 2019
Journal Name
Journal Of Engineering
Thixotropic Hardening of Fao Clay
...Show More Authors

Fao region is characterized by weak soft silty clay to clayey silt thick layer which extends to a depth of about 20 m. The construction of some structures on such soils may needs piles. During the installation of driven piles, the soil geotechnical properties are exposed to significant changes result due to shearing under large shear strains. These changes significantly decrease the shear strength of the virgin soil due to the destruction of soil structure caused by remolding. The degradation of shear strength is usually followed by strength regaining which is called “Thixotropy”. In this study, the thixotropic effect on Fao clay was investigated. Many disturbed and undisturbed soil samples were brought from Fao regi

... Show More
View Publication Preview PDF
Crossref (4)
Crossref
Publication Date
Tue Jun 01 2010
Journal Name
Journal Of The College Of Languages (jcl)
Assess the level of achievement
...Show More Authors

This work, in fact, is an English language teaching study (henceforth, ELT) which may provide the inspiration for much –needed research on issues such as testing students' level of achievement in articulatory phonetics at the university level. It attempts to answer two questions: 1)What is college students' level of achievement in articulatory phonetics? 2- Are there any statistical significant differences in the achievement of college students in articulatory phonetics between the production and recognition testing techniques? This research falls into three sections: Section one indicates the problem, the aims, the hypotheses, the procedures, the limits and the value of the study. Section two provides a general overview of the articul

... Show More
View Publication Preview PDF