Abstract The Knights of Labor, the first national industrial union in the United States, was founded in Philadelphia on December 9, 1869, by Uriah Stephens (1821-82) and eight other Philadelphia garment cutters. Intended to overcome the limitations of craft unions, the organization was designed to include all those who toiled with their hands. By mid-1886 nearly one million laborers called themselves Knights, making the organization the largest and most influential labor union in nineteenth century America. Stephens aspired to unite all wage-earners into a single organization regardless of skill, race, or sex. The organization excluded liquor dealers, lawyers, bankers, and professional gamblers. Stephens stressed the importance of solidarity within the ranks of labor in order to meet the power of capital. Between December 1869 and April 1875 the Knights made few gains outside of the city. During that time eighty-five local assemblies were established, seventy within the Philadelphia region. After the Great Railroad Strike of 1877 membership expanded and the first national officers were initiated after a convention in Reading, Pa., in 1878. In 1879 Terence V. Powderly (1849-1924), a native of Carbondale, Pa., replaced Stephens as Grand Master Workman after Stephens resigned the position. Powderly, who also served as the socialist mayor of Scranton from 1878-84, led the Knights until 1893. This study includes an introduction, four chapters and a conclusion, chapter I dealing with The roots of the labor movement in the United States of America until 1866 , This chapter dealt with a number of topics which are as follows: the first topic the labor movement in the colonial era, the second topic the factors crystallization of the labor movement after independence 1783-1840, and the third topic union activity until the end of the American Civil War 1840-1865. As for the second chapter, which was titled: The Emergence of the Workers' Organization and its Role in the Workers' Movement until 1881, it dealt with a number of topics which are as follows: The first topic is the general scene of the labor movement before the formation of the Workers' Organization 1866-1869, and the second topic is the principles and structure of the Workership Organization, the topic The third activity and work position of the Knights of the Economic Crisis 1870-1879, the fourth topic, Terence V. Powderly and his role in the development of the organization 1879-1881. The third chapter came under the title: The Rise and Prosperity of the Workers ’Organization 1881-1886, which dealt with a number of topics, as follows: The first topic: The factors of the rise of the Workers’ Organization, the second topic: the organization’s position on black workers, the third topic the organization’s activity in the southern states, the fourth topic position The organization from the strike of 1885-1886 and its reflection on the increase in membership, Section Five the organization's position on political action. Finally, the fourth chapter came under the title, Factors of Weakness of the Labor Knights Organization and its Decline 1886-1895. A number of topics were discussed as follows: The first topic: Organizational and structural problems within the Labor Knights Organization, the second topic is the repercussions of the failure of strikes on the organization in 1886-1887, the third topic is the position of the Knights on the Haymarket case And its negative repercussions, the fourth topic: internal differences and divisions and its role in the weakness of the organization, the fifth topic: the end of the Terence V. Powderly era and the decline of the organization's role in the labor movement.
This study thoroughly investigates the potential of niobium oxide (Nb2O5) thin films as UV-A photodetectors. The films were precisely fabricated using dc reactive magnetron sputtering on Si(100) and quartz substrates, maintaining a consistent power output of 50W while varying substrate temperatures. The dominant presence of hexagonal crystal structure Nb2O5 in the films was confirmed. An increased particle diameter at 150°C substrate temperature and a reduced Nb content at higher substrate temperatures were revealed. A distinct band gap with high UV sensitivity at 350 nm was determined. Remarkably, films sputtered using 50W displayed the highest photosensitivity at 514.89%. These outstanding optoelectronic properties highlight Nb2O5 thin f
... Show MoreWater pollution as a result of contamination with dye-contaminating effluents is a severe issue for water reservoirs, which instigated the study of biodegradation of Reactive Red 195 and Reactive Blue dyes by E. coli and Bacillus sp. The effects of occupation time, solution pH, initial dyes concentrations, biomass loading, and temperature were investigated via batch-system experiments by using the Design of Experiment (DOE) for 2 levels and 5 factors response surface methodology (RSM). The operational conditions used for these factors were optimized using quadratic techniques by reducing the number of experiments. The results revealed that the two types of bacteria had a powerful effect on biodegradable dyes. The regression analysis reveale
... Show More
(52)
Biodiesel is an environmentally friendly fuel and a good substitution for the fossil fuel. However, the purity of this fuel is a major concern that challenges researchers. In this study, a calcium oxide based catalyst has been prepared from local waste eggshells by the calcination method and tested in production biodiesel. The eggshells were powdered and calcined at different temperatures (700, 750, 800, 850 and 900 °C) and periods of time (1, 2, 3, 4 and 5 hr.). The effect of calcination temperature and calcination time on the structure and activity of the solid catalyst were examined by X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM), and Brunaure-Emmett-Teller (BET). The optimum catalyst performance was obtained at 900 °C
... Show More
(12)
Steel–concrete–steel (SCS) structural systems have economic and structural advantages over traditional reinforced concrete; thus, they have been widely used. The performance of concrete made from recycled rubber aggregate from scrap tires has been evaluated since the early 1990s. The use of rubberized concrete in structural construction remains necessary because of its high impact resistance, increases ductility, and produces a lightweight concrete; therefore, it adds such important properties to SCS members. In this research, the use of different concrete core materials in SCS was examined. Twelve SCS specimens were subjected to push-out monotonic loading for inspecting their mechanical performance. One specimen was constructed from co
... Show More
(38)
(34)
Fourier Transform-Infrared (FT-IR) spectroscopy was used to analyze gasoline engine oil (SAE 5W20) samples that were exposed to seven different oxidation times (0 h, 24 h, 48 h, 72 h, 96 h, 120 h, and 144 h) to determine the best wavenumbers and wavenumber ranges for the discrimination of the oxidation times. The thermal oxidation process generated oil samples with varying total base number (TBN) levels. Each wavenumber (400–3900 cm−1) and wavenumber ranges identified from the literature and this study were statistically analyzed to determine which wavenumbers and wavenumber ranges could discriminate among all oxidation times. Linear regression was used with the best wavenumbers and wavenumber ranges to predict oxidation time.
... Show More
(22)
(21)
(25)
(12)
In this research, the problem of multi- objective modal transport was formulated with mixed constraints to find the optimal solution. The foggy approach of the Multi-objective Transfer Model (MOTP) was applied. There are three objectives to reduce costs to the minimum cost of transportation, administrative cost and cost of the goods. The linear membership function, the Exponential membership function, and the Hyperbolic membership function. Where the proposed model was used in the General Company for the manufacture of grain to reduce the cost of transport to the minimum and to find the best plan to transfer the product according to the restrictions imposed on the model.
Adsorption of lead ions from wastewater by native agricultural waste, precisely tea waste. After the activation and carbonization of tea waste, there was a substantial improvement in surface area and other physical characteristics which include density, bulk density, and porosity. FTIR analysis indicates that the functional groups in tea waste adsorbent are aromatic and carboxylic. It can be concluded that the tea waste could be a good sorbent for the removal of Lead ions from wastewater. Different dosages of the adsorbents were used in the batch studies. A random series of experiments indicated a removal degree efficiency of lead reaching (95 %) at 5 ppm optimum concentration, with adsorbents R2 =97.75% for tea. Three mo
... Show More
(1)
A total of 96 stool samples were collected from children with bloody diarrhea from two hospitals in Baghdad. All samples were surveyed and examined for the presence of the Escherichia coli O157:H7 and differentiate it from other Non -Sorbitol Fermenting Escherichia coli (NSF E. coli). The Bacterial isolates were identifed by using morphological diagnostic methods, Samples were cultured on liquid enrichment medium, incubated at 37C? for 24 hrs, and then cultured on Cefixime Tellurite -Sorbitol MacConkey Agar (CT- SMAC). 32 non-sorbitol fermenting bacterial isolates were obtained of which 11 were identified as Escherichia coli by using traditional biochemical tests and API20E diagnostic system without differentiation between
... Show More
In this research, beam expander, BEX, is explained and designed for illuminating the
remote flying target. The BEX is optically designed to be suited for Nd:YAG laser of given
specifications. The BEX is modified to be zoom one to meet the conditions of preventing the
receiving unit; i.e the photodetector, from getting saturated at near and far laser tracking.
Decollimation could be achieved by automatic motor, which controls zoom lens of the BEX
according to the required expansion ratio of beam expander