Aim of the present study is Identification of specific gene for GPCR using specific primers .and identification of difference in PCR analysis in patients with heart thrombosis and compared with healthy, Sequencing of PCR product regarding GPCR compared for all three subject, Identification the similarity of human GPCR with local strain of yeast fifty healthy control and fifty patients with thrombosis which diagnosed medically with cardiac specific troponin t, troponin 1 levels and electro myocardiogram ECG. The aged for all subjects ranged (39-75) years patients were lying in cardiac care unit at Ibn- al- Nafees teaching hospital and Sheikh Zayed teaching hospital. Genomic DNA of whole blood was extracted from buffy coat and cell cultured handbook protocol using Bioneer- kit and Genomic DNA fungus/yeast kit was used in isolation and purification of DNA. patients divided into three groups according to their age: group A (60-75) years , group B (50-59) years , group C (39-49) years the results of genomic DNA isolation from blood cells extracted in pure form which ensured by the absorbance ratio (260/280 ) was (1.6 – 1.9 ) with a concentration of 50µg/ml and one DNA band with high resolution in gel electrophoresis. The result of genomic DNA extracted from the local strain of S. cerevisiae showed that DNA extracted with high purity because the absorbance ratio (260 /280 )was (1.7 to 2.0) with a concentration of 60 µg/ml and presence one DNA band with high resolution in gel electrophoresis. primers were designed depending on the sequence of the gene responsible for the production of GPCR on the chromosome 11 , GPCR contain three exons which covered with six primers to detect a defect in gene sequence among. Results of gel electrophoresis are showed that primer GPRX1 gave one band for (Control , A,B ) groups but absent amplified band in the patient eight and nine from group C. with molecular weight of this band is 1000 bp. The GPRX2 primer used to amplify second exon in the GPCR gene ,the molecular weight of amplified bands are 400 bp were present in all control samples and three groups of thrombosis patientsand yeast. GPRX2A primer that designed to amplify part two from second exon of GPCR gene by PCR gave one band for all samples which include control and patient, the molecular weight of this band is 500 bp. PCR analysis showed one amplify band for all control and patients group with molecular weight 500 bp for GPRX3 primer and 400 bp for GPRX3A ,300 bp for GPRX3B. The specific primers which designed to covering GPCR gene used to amplification genomic DNA of the local strain S.cerevisiae by PCR technique. Results showed all six primers which gave one band with difference molecular weight for each primer. All samples demonstrate identity planned sizes to control and local strain of S. cerevisiae samples except patient number 8 and 9 in the group(C) that showed non specialist bands in specific primer with first exon (GPRX1) .So the genetic sequence analysis of these two case based on the sequence of the remainder exons to detect the genetic defect in these case. The sequence of the first part for the second exon (X2) was identity standard sequence found on the NCBI web site for case( 8). The case (9) showed identity with the sequence present in the human gene bank but some difference in the first of sequence which neglected because it is in the place link of primer. The results for case 8 showed some mutation for Exon X2(part2). but case (9) demonstrate one deletion and one substitution. The results, also, illustrated that the ether48 thrombosis patients didn't appeared any mutation despite the positive results for ( Troponin) that gives strong indication of thrombosis. The conclusion Primer GPRX1 gave one band for (Control , A,B ) groups but absent amplified band in the patient eight and nine from group C. The molecular weight of this band is 1000 bp. The amplified band with molecular weight 400 bp were present in all control samples and three groups of thrombosis patients with primer GPRX2 and 500 bp with primer GPRX2A.PCR analysis showed one amplify band for all control and patients group with molecular weight 500 bp for GPRX3 primer.,400 bp with GPRX3A and 300 bp for primer GPRX3B.Similarity between results given by healthy group and local strain of yeast. Genetic study showed that there are only two case of patients eight and nine demonstrated mutation in nucleic location on exon two and three from GPCR gene
Adsorption experiments were carried out using two different low-cost sorbent materials, date seeds and olive seeds. These sorbents used as a single phase (not as mixture) to remove cadmium ions from simulated wastewater by adsorption process. The equilibrium time was found at 2 hr. The experiments include different parameters such sorbent type and weight and contact time. It was found that both of olive seed and date seed have approximately the same adsorption capacity (qm) with 15.644 mg/g and 15.2112 mg/g, respectively. Equilibrium isotherms and kinetic studies have been carried out. Langmuir isotherm model better fits the experimental data compared with the Freundlich isotherm for olive seed, while Freundlich isotherm fits for date se
... Show MoreThe exploitation of obsolete recyclable resources including paper waste has the advantages of saving resources and environment protection. This study has been conducted to study utilizing paper waste to adsorb phenol which is one of the harmful organic compound byproducts deposited in the environment. The influence of different agitation methods, pH of the solution (3-11), initial phenol concentration (30-120ppm), adsorbent dose (0.5-2.5 g) and contact time (30-150 min) were studied. The highest phenol removal efficiency obtained was 86% with an adsorption capacity of 5.1 mg /g at optimization conditions (pH of 9, initial phenol concentration of 30 mg/L, an adsorbent dose of 2 g and contact time of 120min and at room temperature).
... Show More
(5)
The analysis and efficiency of phenol extraction from the industrial water using different solvents, were investigated. To our knowledge, the experimental information available in the literature for liquid-liquid equilibria of ternary mixtures containing the pair phenol-water is limited. Therefore the purpose of the present investigation is to generate the data for the water-phenol with different solvents to aid the correlation of liquid-liquid equilibria, including phase diagrams, distribution coefficients of phenol, tie-lines data and selectivity of the solvents for the aqueous phenol system.
The ternary equilibrium diagrams and tie-lines
... Show More
Cadmium is one of the heavy metal found in the wastewater of many industries. The electrocoagulation offers many advantages for the removal of cadmium over other methods. So the removal of cadmium from wastewater by using electrocoagulation was studied to investigate the effect of operating parameters on the removal efficiency. The studied parameters were the initial pH, initial concentration, and applied voltage. The study experiments were conducted in a batch reactor with with two pairs of aluminum electrodes with dimension and 2mm in thick with 1.5 cm space between them. The optimum removal was obtained at pH =7, initial concentration = 50 mg/L, and applied voltage = 20 V and it was 90%.
(8)
This study aims to test ceramic waste's capacity to remove nickel from aqueous solutions through adsorption. Ceramic wastes were collected from the Refractories Manufacturing Plant in Ramadi. Through a series of lab tests, the reaction time (5, 10, 15, 20, 25, 30, 35, 40, 45, and 50 minutes, and Ni concentrations (20, 40, 60, and 80) were tested using ceramic wastes with a solid to liquid ratio of 2g/30ml. At a temperature of 30ºC, the pH, total dissolved solids (TDS), and electrical conductivity (EC) were all measured. The equilibrium time was set at 30 min. Thereafter, the sorption (%) somewhat increased positively with the Ni concentration. Freundlich's equation showed that the adsorption intensity is 1.1827 and the Freundlich c
... Show More
(1)
Activated carbon was Produced from coconut shell and was used for removing sulfate from industrial waste water in batch Processes. The influence of various parameter were studied such as pH (4.5 – 9.) , agitation time (0 – 120)min and adsorbent dose (2 – 10) gm.
The Langmuir and frandlich adsorption capacity models were been investigated where showed there are fitting with langmmuir model with squre regression value ( 0.76). The percent of removal of sulfate (22% - 38%) at (PH=7) in the isotherm experiment increased with adsorbent mass increasing. The maximum removal value of sulfate at different pH experiments is (43%) at pH=7.
In this study, measuring effectiveness Alauriz in some seeds powder and found that the seeds of-sophistication sex had the highest effective enzymatic reach 353 units / gProtein and Alkabbatah study enzyme extract under different storage conditions and Altaj showed that the enzyme loses Thbatih and whether Mrkbhetwan adding Alklasrin concentration of 10% for the systematic solution
In this study, the adsorption of Zn (NO3)2 is carried out by using surfaces of malvaparviflora. The validity of the adsorption is evaluated by using atomic absorption Spectrophotometry through determination the amount of adsorbed Zn (NO3)2. Various parameters such as PH, adsorbent weight and contact time are studied in terms of their effect on the reaction progress. Furthermore, Lagergren’s equation is used to determine adsorption kinetics. It is observed that high removal of Zn (NO3)2 is obtained at PH=2. High removal of Zn (NO3)2 is at the time equivalent of 60 min and reaches equilibrium,where 0.25gm is the best weight of adsorbant . For kinetics the reaction onto malvaparviflora follows pseudo first order Lagergren’s equation.
(1)
Experimental activity coefficients at infinite dilution are particularly useful for calculating the parameters needed in an expression for the excess Gibbs energy. If reliable values of γ∞1 and γ∞2 are available, either from direct experiment or from a correlation, it is possible to predict the composition of the azeotrope and vapor-liquid equilibrium over the entire range of composition. These can be used to evaluate two adjustable constants in any desired expression for G E. In this study MOSCED model and SPACE model are two different methods were used to calculate γ∞1 and γ∞2