Reinforcing asphalt concrete with polyester fibers considered as an active remedy to alleviate the harmful impact of fatigue deterioration. This study covers the investigation of utilizing two shapes of fibers size, 6.35 mm by 3.00 mm and 12.70 mm by 3.00 mm with mutual concentrations equal to 0.25 %, 0.50 % and 0.75 % by weight of mixture. Composition of asphalt mixture consists of different optimum (40-50) asphalt cement content, 12.50 mm nominal aggregate maximum size with limestone dust as a filler. Following the traditional asphalt cement and aggregate tests, three essential test were carried out on mixtures, namely: Marshall test (105 cylindrical specimens), indirect tensile strength test (21 cylindrical specimens)

One of the most important challenges facing the designers of the sewerage system is the corrosion of sewers due to the influence of sewerage contaminates which lead to failure of the main lines of sewers. In this study, a reference mix of 1: 1.5: 3 was used and the 4% Flocrete PC200 by weight of cement was added to the same mixing ratio in the second mixture. Twenty-four samples were tested for each mixture, 12 of which were used to compression strength test in ages (7, 14 and 28) day and six samples were submerged after 28 days of wet treatment at (5 and 10) % concentrations of sulfuric acid. The other six samples were painted after 28 days of wet treatment with coating Polyurethane and after 24 hours were flooded with a concentrat

Chemical resistance ceramic tiles and mortar to alkali solution are prepared and characterized in this study due to the lack of this kind of publications in ceramic literature. Most of the utilized materials are readily available raw materials and the other materials are available commercially. Physical and mechanical properties are measured and indicate that the prepared ceramic tile and mortars are competitive to traditional building materials. Chemical resistance test against alkali solution is also performed by subjecting test specimens to 10%NaOH liquid for two weeks. The results give no indication of chemical attack to specimens of ceramic tile and mortar. The results are discussed and important conclusions are drawn to encourage c

The present study was conducted to induce mutations by UV- light in Trichoderma harzianum for tolerance of Bavistin fungicides which are commonly used to control soil born phytopathogens. The mycelium growth of T. harzianum T1, T2 was inhibited completely by 30 μg (a.i.) /ml PDA of Bavistin. Two isolates of Trichoderma harzianum T1 and T2 conidia suspensions 104 conidia / ml were irradiated by UV lights at 254, 320, 365nm wavelength for 10, 20, 40, 80, 160 min using UV dark room cabinet and spectrophotometer and cultured on PDA media containing 50, 60, 75, 100, and 150 μg (a.i) / ml Bavistin. A thirty one unstable mutants tolerant to Bavistin were obtained after irradiation the T. harzianum T1, T2 conidia suspension 104 conidia / ml by

Corrosion Resistance Enhancement for low carbon steel is very important to extend its life service, the coating process is one of the methods which can using to achieve this, and it's the most important in surface treatments to improve the properties of metals and alloys surfaces such as corrosion resistance. In this work, low carbon steel was nitrided and coated with nano zinc using gas phase coating technical, to enhance the resistance of corrosion. The process included adding two layers. The first, a nitride layer, was added by precipitating nitrogen (N) gas, and the second, a zinc (Zn) layer, was added by precipitating Zn. The process of precipitating was carried out at different periods (5, 10, and 15 minutes). Scan electron mi

The study aims to detect the presence of carbapenems genes and the prevalence of antibiotic-resistant E. coli in the Tigris River. Samples were collected from three sites of the Tigris River: S1Adhamiya, S2 Medical city hospital, and S3 Abu Nuwas. It diagnosed 40 isolates of E. coli out of 67 isolates of bacteria by Vitek2. The antibiotic sensitivity was determined by the disk diffusion method. E.coli isolates were tested against 7 antibiotics these belonged to β-lactam, Carbapenem. Also, the resistance genes) blaVIM and blaNDM) detected for these isolates of E. coli.  The results appeared resistance of  E.coli against AMC 82.5%, PRL 62.5%, AM 55%, and moderate resistance

Abstract

This work involves studying corrosion resistance of AA 6061T6 butt welded joints using Two different welding processes, tungsten inert gas (TIG) and a solid state welding process known as friction stir welding, TIG welding process carried out by using Rolled sheet of thickness6mm to obtain a weld joint with dimension of (100, 50, 5) mm using ER4043 DE (Al Si₅) as filler metal and argon as shielding gas, while Friction stir welding process carried out using CNC milling machine with a tool of rotational speed 1000 rpm and welding speed of 50mm/min to obtain the same butt joint dimensions. Also one of weld joint in the same dimensions subjected to synergistic weld

     Bacterial vaginosis (BV) is a common infection that occurs when the number of lactobacillus spp. bacteria (vaginal flora) decreases in the vaginal canal. The study aimed to determine the prevalence of Staphylococcus aureus within vaginosis in order to emphasize the importance of early detection and treatment. Totally, 90 vaginal swabs were collected using speculum and swabbing. The vaginal swabs were subjected to standard microbiological testing, which included microscopy, cultures (Blood agar and Mannitol salt agar), and antibiotic sensitivity testing. The results showed that out of 90 samples, only 40 S.aureus isolates were collected. S. aureus isolates showed maximum sensitivity to gentamic