A field experiment was conducted in Yusufiya sub-district - Mahmudiya township/Baghdad governorate in silty loam texture soil during the spring season of 2020. The experiment included three treatments with three replicates, as the Randomized Complete Block Design (RCBD) was used according to the arrangement of the split design block. The treatments are in the irrigation system, which included surface drip irrigation (T1) and sprinkler irrigation (T2). Secondly, the Irrigation levels including the irrigation using 0.70 Pan Evaporation Fraction PEF (I1), irrigation using 1.00 PEF (I2), and irrigation using 1.30 PEF (I3). Coupled with, Potassium fertilization treatments that include (0.0 kg k ha-1 (K1), 150 kg k ha-1 (K2) and 300 kg k ha-1 (K3)). The results showed that the actual seasonal water consumption reached its peak at irrigation level I1, which reached 390.03 and 256.41 mm for the sprinkler and drip irrigation systems, respectively. However, the actual seasonal water consumption at irrigation level I2 was 373.92 and 255.63, and it was 353.82 and T255.15 mm at irrigation level I3 for the sprinkler and drip irrigation systems, respectively. The lowest values of the crop coefficient at the tuber maturity stage using the sprinkler irrigation system were 0.49, 0.46, and 0.44, and at the vegetative growth stage using the surface drip irrigation system by 0.37, 0.32, and 0.38 for irrigation levels I1, I2, and I3, respectively. Even though the greatest values were in the tuber Initiation and bulking stages, as they reached 0.86, 0.66, and 0.79 using the sprinkler irrigation system, while they reached 0.49, 0.54, and 0.51 using the surface drip irrigation system for I1, I2, and I3 levels, respectively. The highest water productivity for treatment I3K3 was 15.70 and 27.20 kg m-3 of sprinkler and surface drip irrigation systems, respectively. In contrast, the lowest water productivity was 8.73 and 17.72 kg m-3 for treatment I1K1 of sprinkler and surface drip irrigation systems, respectively. Whereas, the highest value of crop water use efficiency was 11.70 and 17.58 kg m-3 for I3K3 treatment of sprinkler and surface drip irrigation systems, respectively. Although, the lowest value of crop water use efficiency was 6.71 and 11.49 kg m-3 for I1K1 treatment of sprinkler and surface drip irrigation systems, respectively. Lastly, the highest yield was 44.87 Mg ha-1 at treatment T1I3K3.
Background: Orthodontic tooth movement is characterized by tissue reactions, which consist of an inflammatory response in periodontal ligament and followed by bone remodeling in the periodontium depending on the forces applied. These processes trigger the secretion of various proteins and enzymes into the saliva.The purpose of this study was to evaluate the activity of alkaline phosphatase (ALP) in saliva during orthodontic tooth movement using different magnitude of continuous orthodontic forces. Materials and Methods: Thirty orthodontic patients (12 males and 18 females) aged 17-23 years with class II division I malocclusion all requiring bilateral maxillary first premolar extractions were randomly divided into three groups according to t
... Show MoreThis research delves into the realm of asphalt technology, exploring the potential of nano-additives to enhance traditional asphalt binder properties. Focusing on Nano-Titanium Dioxide (NT), Nano-Aluminum Oxide (NA), and Nano-Silica Oxide (NS), this study investigates the effects of incorporating these nanomaterials at varying dosages, ranging from 0% to 8%, on the asphalt binder’s performance. This study employs a series of experimental tests, including consistency, storage stability, rotational viscosity, mass loss due to aging, and rheological properties, to assess the impact of nano-additives on asphalt binder characteristics. The findings indicate a substantial improvement in the consistency of the asphalt binder with the add
... Show MoreThis research delves into the realm of asphalt technology, exploring the potential of nano-additives to enhance traditional asphalt binder properties. Focusing on Nano-Titanium Dioxide (NT), Nano-Aluminum Oxide (NA), and Nano-Silica Oxide (NS), this study investigates the effects of incorporating these nanomaterials at varying dosages, ranging from 0% to 8%, on the asphalt binder’s performance. This study employs a series of experimental tests, including consistency, storage stability, rotational viscosity, mass loss due to aging, and rheological properties, to assess the impact of nano-additives on asphalt binder characteristics. The findings indicate a substantial improvement in the consistency of the asphalt binder with the add
... Show MoreThis study was carried out in order to determine the toxic, mutagenic and antimutagenic effects for Mallow (Malva parviflora) in comparison to its mutagenic effect of Ultraviolet (UV) because it is consider physical mutagen by using parameters for the extract pri , with , post UV exposure by using bacterial system (G-system). The used system consisted of three isolates G3 Bacillus spp., G12 Arthrobacter spp. and G27 Brevibacterium spp.. The study depended on recording survival fraction (Sx) for studying the effects and induction of Streptomycin and Refampicin resistance mutants as a genetic markers.Water Extract was prepared from fresh and dry mallow leaves, stems, flowers and roots, in optimum concentration equal to (125µg/ml) which is
... Show MoreWhen the guard honey bees, Apis mellifera L., form a clump at the hive entrance or on the flight board, the oriental hornet, Vespa orientails L., either creeps toward the clump or hovers over it in order to take a bee. Once the hornet creeps, only few bees facing the hornet become alert, rock their heads and antennae, open their wings, and take a posture of defense. The rest of the clump stays listless without any signal of concern. However, the clump stays dense and the defending bees do not detach themselves neither from the rest of the clump nor from each other. For this reason, it is very difficult for the hornet to grab a bee unless the latter makes a “mistake” by detaching herself from other adjacent bees. If the hornet grabs s
... Show MoreIt highlights the importance of construction projects because of its significant role in the development of society, including the buildings FEDE projects to their importance to raise the level of education through the conclusion of the special to implementation and the establishment of schools of contracts at the country level, which requires the completion of the project at less time and within the cost specified and the best quality and may highlight the importance of time on all the elements of what has an important role in setting up the project for various reasons may be the need for the use of schools as soon as possible, but the reality showed exceeded the completion of those schools could be up to 6 years and there are some cont
... Show MoreThe studying trying to determine the role of Strategic Intelligence on the Process of Green Manufacturing of Sample of Mineral water factories at Dahuk city. The study submit a theoretical frame of Strategic Intelligence and Green Manufacturing, a supposed sample, had been set to reverye the nature of the relations and effect in the study Varity, the study depend on group of the main and branch concurring with the relations and effect between the Strategic Intelligence and Green Manufacturing to answer the following questions about research to problems:
What are the relationships and effects between stra
... Show MoreThis research has been performed on the vegetative parts of the
Horsetail Equisetum arvense L. v.ilich grows naturally in Haj Umran , north of Iraq , to determine and estimate some active chemical compounds , besides studyi ng their inhi bitory effe(;tS upon some urinary tracts infections (UTI) bacteria through the
investigation on the inhibitory effects of water and ethanolic extracts of this plant .
The results revealed presr.:nr.:t: of some active chemical compounds such as: tannins, saponins, resins,
... Show More