Preferred Language
Articles
/
vhc1spMBVTCNdQwCVumo
STUDY EVALUATION AND ANALYSIS OF THE PROPERTIES OF SOME PERFORMANCE STANDARDS FOR AGRICULTURAL TRACTOR AND SORGHUM BICOLOR (L.) MOENCH YIELD
...Show More Authors

A field experiment was conducted in an agricultural field in Al-Hindia district, Karbala governorate in a silty clay soil during the year 2020. The research included a study of two factors, the first is the depth of plowing at two levels, namely 13 and 20 cm, which represented the main blocks. The second is the tire inflation pressure at two levels, namely (70 and 140 kPa), which represented the secondary blocks. Slippage percentage, field efficiency, leaf area, and 300 grain weight were studied. The experiment was carried out using a split-plot system under a Randomized complete block design, at three replications. The tillage depth of 13 cm exceeds/transcend by giving it the least slippage of (11.01%), the highest field efficiency of (50.09%) and the largest leaf area of (0.48 cm2 ). The tire pressure of 70 kPa obtained the highest field efficiency of (47.79%) and the largest paper area of (0.47 cm2 ). Tire pressure 140 kPa, exceeds / transcends in recording the minimal slippage of (11.39%). As for the bilateral interaction, it impacted all the studied traits except for the weight of (300) grains

Publication Date
Tue May 05 2020
Journal Name
Book
Study the inhibitory effect of miswak extract on biofilm gene.
...Show More Authors

This book presents the problem of tooth decay due to bacteria Streptococcus mutans one of methods of treatment using 3 extracts of S. persica (miswak) (aqueous, acetone and methanol) and prove its effectiveness and its impact on the gtf (B, C, and D) genes that code the glucosyltransferase (Gtf) enzymes that cause decay membrane compared to the usual means used for the prevention of tooth decay

Publication Date
Sat Oct 01 2011
Journal Name
Iraqi Journal Of Physics
Study the spectroscopy of samarium encapsulated in silica Xerogel matrices
...Show More Authors

The sol-gel preparation technique of transparent silica monoliths containing up to 0.5 M of samarium have been described. The sol-gel processing parameters are: acid catalyzed hydrolysis and controlled drying. The prepared monoliths are analyzed by X-ray diffraction, pycnometer measurements, Fourier transformation infrared spectroscopy and optical spectroscopy. The oscillator strengths of the Sm3+ ions in the silica monoliths are calculated. The results show a linear concentration dependence of some Sm3+ transitions in UV/Vis absorption spectra and formation of Sm3+ clusters inside the pores structure of silica monoliths at high Sm3+ concentration

View Publication Preview PDF
Publication Date
Tue Dec 24 2019
Journal Name
Journal Of Legal Sciences
Penal requirement in the contracts of professional players: comparative study
...Show More Authors

          Sport is generally no longer merely a game of entertainment, but it is a work of the player for the sports club contracted by him. The player is no longer regarded as a means of entertainment and physical development, but is seen as an economic Which is to gain a return for the effort, and because of the spread of the phenomenon of professionalism in the field of sports, emerged sporting contracts coupled with penal conditions as a means to regulate the relationship between the player and the sports club is the contract transfer professional player and his loan, and his professional contract, which concerns us in this regard is to address the J Loyalty) contained in the contract betw

... Show More
View Publication Preview PDF
Crossref
Publication Date
Sat Mar 30 2013
Journal Name
Iraqi Journal Of Chemical And Petroleum Engineering
Theoretical Study on Heat Transfer in the Presence of Fouling
...Show More Authors

The fouling depositions of crude oil stream were studied theoretically in a shell and tube heat exchanger to investigate the effect of depositions on the heat transfer process. The employed heat exchanger was with steam flowing in the inner tubes and crude oil in the shell at different velocities and bulk temperatures. It is assumed that fouling occurs only on the heated stream side (crude oil). The analysis was carried out for turbulent flow heat transfer conditions with wide range of Reynolds number, bulk temperature and time. Many previously proposed models for fouling resistance were employed to estimate a new model for fouling rate. It is found that the fouling rate and consequently the heat transfer coefficient were affected by Rey

... Show More
View Publication Preview PDF
Publication Date
Sun Feb 06 2022
Journal Name
Iraqi Journal Of Science
Survey Study on the Prevalence of Cutaneous Leishmaniasis in Iraq
...Show More Authors

Human cutaneous leishmaniasis (CL) is caused by Leishmania sp. parasite and endemic in Iraq. The current study was including analysis of available database from Iraqi CDC to determine the distribution of CL cases for the period (2008-2015 years) in Iraq. Total reported cases for this period were 17001 (range 2.9-10.5 per 100,000 individuals). Highest reported cases were recorded in the year 2015 (4000 cases). Male infections cases of CL (50.8%) were more than female infections (49.2%). Highest infections of CL were observed in the age group (5-14yr.) as (34.6%), While the lowest infection of CL were observed in the age group (>1yr.) as (4.3%). Highest infection case of CL was observed in the middle and west of Iraq (53%). In contrast,

... Show More
View Publication Preview PDF
Publication Date
Tue Feb 01 2022
Journal Name
Journal Of Engineering
Geomechanical study to predict the onset of sand production formation
...Show More Authors

One of the costliest problems facing the production of hydrocarbons in unconsolidated sandstone reservoirs is the production of sand once hydrocarbon production starts. The sanding start prediction model is very important to decide on sand control in the future, including whether or when sand control should be used. This research developed an easy-to-use Computer program to determine the beginning of sanding sites in the driven area. The model is based on estimating the critical pressure drop that occurs when sand is onset to produced. The outcomes have been drawn as a function of the free sand production with the critical flow rates for reservoir pressure decline. The results show that the pressure drawdown required to

... Show More
View Publication Preview PDF
Crossref (1)
Crossref
Publication Date
Sat Apr 01 2017
Journal Name
Al–bahith Al–a'alami
The Bahraini Daily Press Coverage of Women Issues): (Analytical Study
...Show More Authors

This research is an attempt to assess the extent of coverage given by the Bahrain daily press to Women and related issues. It attempts to determine how important the issues of the Women issues were covered in the Daily Press and whether the press has given enough attention to the Women issues.
The research was conducted by analyzing the coverage “AkhbarAlKhaleej” Daily newspaper gave the Women issues during the period of this study.
Thus, this study aims at assessing the degree to which the Bahraini daily newspapers have dealt with the Women issues. The researcher analyzed the contents of the Bahraini press, “AKHBAR ALKHALEEJ” daily newspaper during 2014, as Bahraini press coverage seems to be stable, and more balanced and

... Show More
View Publication Preview PDF
Crossref
Publication Date
Fri Mar 01 2019
Journal Name
Al-khwarizmi Engineering Journal
Study the Factors Effecting on Welding Joint of Dissimilar Metals
...Show More Authors

The aim of this work is to study the factors that affect the welding joint of dissimilar metals. Austenitic stainless steel-type AISI (316L) with a thickness of (2mm) was welded to carbon steel (1mm) using an MIG spot welding.  The filler metal is a welding wire of the type E80S-G (according to AWS) is used with (1.2mm) diameter and CO2 is used as shielding gas with flow rate (7L/min) for all times was used in this work.

        The results indicate that the increase of the welding current tends to increase the size of spot weld, and also increases the sheer force.  Whereas the sheer force increased inversely with the time of welding. Furthermore, the results indicate that i

... Show More
View Publication Preview PDF
Publication Date
Sat Aug 20 2022
Journal Name
Journal Of Legal Sciences
The Privacy of public companies in Iraq: a comparative study
...Show More Authors

General companies are one of the methods that help managing general economic services. Countries have taken a step into this type of management because of the criticism-related to the different styles of managements. Criticism have been directed specifically at the direct type of management to such general economic services. Most of the Iraqi economic general services are being ran by this type of style; general type.

What has been agreed upon, whether in France, Egypt or Iraq has been that such establishments of general companies have to take place either by legislating a special order that states constructing a general company by the legislator or according to the law by authorizing law by the legislator to one of the local per

... Show More
View Publication Preview PDF
Crossref
Publication Date
Wed Feb 20 2019
Journal Name
Political Sciences Journal
Political finance: a study on the financing of political parties
...Show More Authors

 Parties as active units in this process in order to work must have access to sources of funding in order to maintain their political presence in society and participate in the process of electoral competition, To win the election, bolstering the huge role that money has played in influencing the principle of equality among contestants in the elections. Those who own money will have a greater chance of winning the elections while less competitive opportunities for others who do not own the money or what they own does not give them the competitive ability to win elections. From this point of view, controlling political finance through legal regulation and institutional, media and popular monitoring has become an important requirement

... Show More
View Publication Preview PDF
Crossref