Background: Poly-ether-ether-ketone(PEEK) has been introduced to many dental fields. Recently it was tested as a retainer wire‎ following orthodontic treatment. This study aimed to investigate the effect of changing the bonding spot size and location on the performance of PEEK retainer wires. Methods: A biomechanical study involving four three-dimensional finite element models was performed. The basic model was with a 0.8 mm cylindrical cross-section PEEK wire, bonded at the center of the lingual surface of the mandibular incisors with 4 mm in diameter composite spots. Two other models were designed with 3 mm and 5 mm composite sizes. The last model was created with the composite bonding spot of the canine away from the center of the crown, closer to the lateral incisor. The linear displacement of the teeth, strains of the periodontal ligament, and stresses in PEEK wire and composite were evaluated. The data was numerically produced with color coded display by the software. Selected values were tabulated and compared among models. Results: The amount of linear displacement and strain was very low. Stresses in the wire and composite were affected by the size and position of the composite bonding spot. The safe limits were identified at 235 MPa for PEEK and 100 MPa for composite. The basic model had a von Mises stress in the PEEK wire of 122.09 MPa, and a maximum principal stress in the composite of 99.779 MPa. Both stresses were within the safe limits, which means a lower risk of failure in PEEK and composite. All other models had stresses that exceeded the safe limit of the composite. The 3 mm composite model was the only one that developed stresses in the wire more than the safe limits of PEEK. Conclusions: Within the limitations of this study, bonding PEEK wires with 4 mm bonding spots to the clinical crown center provided the best mechanical performance of the wires and spots; otherwise, the mechanical properties of the wire and composite would be affected and, therefore, might affect the retention process. Keywords: Retention, PEEK, Finite element analysis
In this paper, series of new complexes of Manganese(II), Cobalt(II), Nickel (II) Cupper(II) Zinc(II), Cadmium(II) and Mercury (II) are prepared from the new ligand [2-(3-benzoylthioureido)-3-(-4- hydroxyphenyl) propanoic acid (BHP) derived from tyrosine and benzoylisothiocyanate .Chemical structures are obtained from their 1 H, 13CNMR spectra (for BHP), elemental microanalyses, molar conductance, FTIR, UV–Vis, magnetic susceptibility in addition to TGA/DTG and DSC analysis, the suggested geometry for all complexes was tetrahedral. The biological activity of BHP and its complexes has been extensively studied against two bacterial species Staphylococcus aurous (G+) and Escherichia coli (G-) by agar-well diffusion technique, where Mn(II), Co
... Show MoreConcentrations 25, 50 and 100 mg of nano-capsules linolenic acid and non-capsulated fatty acid for 1kg of Milk was used for yogurt manufacture. The results showed no significant differences in the ratio of titration acidity and pH values between all processed treatments at the beginning and during of period storage. The treatments was added to it coated omega-3 by nano method were the least exposed to the oxidation process from the non-capsules omega-3, And for shield of The poly lactic acid had a significant role in the protection of alpha-linolenic acid against lipolysis by the formation of a protective layer to protect the acid from the activity of lipases enzymes, and the addition of fatty acid linolenic to milk was determined the gr
... Show MoreThe multi-focus image fusion method can fuse more than one focused image to generate a single image with more accurate description. The purpose of image fusion is to generate one image by combining information from many source images of the same scene. In this paper, a multi-focus image fusion method is proposed with a hybrid pixel level obtained in the spatial and transform domains. The proposed method is implemented on multi-focus source images in YCbCr color space. As the first step two-level stationary wavelet transform was applied on the Y channel of two source images. The fused Y channel is implemented by using many fusion rule techniques. The Cb and Cr channels of the source images are fused using principal component analysis (PCA).
... Show MoreAerial manipulation of objects has a number of advantages as it is not limited by the morphology of the terrain. One of the main problems of the aerial payload process is the lack of real-time prediction of the interaction between the gripper of the aerial robot and the payload. This paper introduces a digital twin (DT) approach based on impedance control of the aerial payload transmission process. The impedance control technique is implemented to develop the target impedance based on emerging the mass of the payload and the model of the gripper fingers. Tracking the position of the interactional point between the fingers of gripper and payload, inside the impedance control, is achieved using model predictive control (MPD) approach.
... Show MoreThe Arab Islamic art was best known as pure abstraction or realism distorted from what is natural. The two styles, or one of them, was the most prominent in the Islamic arts, such as decoration, photography and architecture. The analogy that was prevalent in the non-Islamic world did not have a presence equivalent the aforementioned styles despite the great openness to the cultures of different countries, which characterized that stage, which resulted from the Islamic conquests, the conversion of many people to the Islamic faith, and their migration to the Islamic cities at the time, bringing with them their arts and methods of formulation. This makes us question the influential references that invite the Arab Muslim artist to follow the
... Show MoreThis research aims at identifying the Iraqi EFL students' academic buoyancy in reading and listening skills and then finding out the difference between the two skills; Furthermore, finding out the five predictors differences of each of the two scales. Two academic buoyancy scales used to collect data. After achieving the scales' psychometric characteristics, they are submitted to the study sample. The sample of (100) female students selected according to the stratified random method from the second class at the Department of English\ College of Education for Women\ University of Baghdad. The results show that the students have academic reading buoyancy and have not academic listening buoyancy; the difference between the two abilities shows
... Show MoreThe artistic mediation in theater connects the human elements with the material elements in the theatrical production process. The human artistic mediator plays a crucial role in achieving the artistic and expressive goals of the theatrical work, requiring high skills and expertise. Their role involves coordinating and executing the technical aspects of production, such as lighting, sound, set design, costumes, and acting, using their skills and techniques to transform the theatrical text into a successful stage performance. The artistic mediator significantly impacts the quality of the theatrical work and creates a distinct viewing experience for the audience. Technological advancements and continuous updates in theater contribute to th
... Show MoreThe topic of research (women and ideology in the feature film) is a series of researches addressed by the researcher on the subject of women in the feature film through studying the ideology as a thought and political system not only limited to the world of men, but women had a significant contribution in this area. The research identified the problem and its need as well as the objectives of the research and clarified its limits and importance. The research also identified the theoretical framework, which included the following axes: personality and ideology, film and ideology, then women and ideology in the film.
After the completion of the theoretical framework, the research concluded a set of indicators of the theoretic
... Show MoreThe goal of the research is to highlight the role of the governance and its characteristics in increasing the tax outcome by implementing the laws, regulations and annual controls issued annually from the general authority for taxation for the financing of the general treasury of the state, Additional development and economic capacity, As the search shares a view of the governance and its characteristics and its ideas from increasing tax output. The analytical transparent approach was used by adopting the practice of practicalities of the general authority for tax For quotations in the senior cabinet section ,the revealing of the ongoing operations was relied on the revenue for each financial year, The tools adopted in the process of ana
... Show More