Preferred Language
Articles
/
jpd-315
Enviromental impact assessment of cement industry using Leopold Matrix
...Show More Authors

The assessment of the environmental impact of the cement industry using the Leopold Matrix is ​​to determine the negative and positive impacts on the environment resulting from this industry, and what are the long-term and short-term effects, direct and indirect, and the amount of these effects and potential risks, and that this evaluation process is done through a number of methods, including Matrix method, including (Leopold).

 

The importance of the research because the cement occupies is of great importance in the world, especially in our country, Iraq, in the sector of construction and modernity, and the toxic emissions and solid waste produced by the production of this material.

 

Environmental problems resulting from this industry have been addressed. The basic problem of the cement industry is determined in the environmental field because of the cumulative effect it has on the environment and production capacity on the surrounding environment.

 

The main objective of conducting the research is to assess the environmental impacts of major industrial projects, especially cement, one of the analytical methods in urban planning, which can contribute to reducing the negative effects on the environment and on the uses of the surrounding land. Among the disadvantages of this industry is that it

 

 

 

 

 

 increases air, soil and water pollution, as well as leveling the lands and decreases the health safety of workers through the emissions they cause,

 

perhaps the most prominent of which are carbon dioxide (CO2), carbon dioxide (CO), and methane (CH4).

 

As these gases lead to direct air pollution, especially in the areas surrounding the plant.The Kirkuk cement plant is one of the major economic development projects in the country as it provides a national and local product to support other construction projects, and at the same time it is a category A polluting industry and therefore it is necessary to sign it outside the cities, and it requires an environmental impact assessment prepared in advance according to a detailed study that includes problems and impacts. Expected and solutions to it.

 

The evaluation process is to ensure the protection, improvement and preservation of the environment and natural resources. Therefore, the research considers the necessity to oblige the owners of cement projects to implement the environmental requirements mentioned in the environmental legislation brochure in force, and to develop a strategy to mitigate the negative impacts and alternative options in the production process.

View Publication Preview PDF
Quick Preview PDF
Publication Date
Sun Sep 15 2019
Journal Name
Al-academy
The Pleasure of Fear and the Temptation of the Thriller in Horror Cinema: كــاظــم مــؤنـــس عزيز
...Show More Authors

In the theory of cinema genre, horror films are at the forefront of the list. It is one of the oldest genres that saw the light with the early emergence of cinema, taking advantage of literary works, especially Gothic literature and it continues to this day, but the third millennium has seen a marked increase in the number of films and recipients alike. There were many types within the same genre and there are many authors and varied topics, all seeking to spread terror and panic and fear in the hearts of viewers who are passionate about the type of horror. Although the fear and horror have been, throughout the ages, a challenge to the psychological balance and stability, as well as being a rejection and an opposition to the aesthetic ta

... Show More
View Publication Preview PDF
Crossref
Publication Date
Fri Oct 01 2010
Journal Name
Iraqi Journal Of Physics
The effect of TiO2 addition on the thermal conductivity of Polymethylmetha acrylate, Polycarbonate and Polystyrene Polymers
...Show More Authors

Thermal conductivity measurement was done for specimens of Polystyrene/ titanium dioxide, Polycarbonate/ titanium dioxide and Polymethylmetha acrylate/ titanium dioxide composites for weight ratio of 1.9/ 0.1 and 1.8/ 0.2 wt% for different thickness of the samples. The experimental results show that the thermal conductivity is increased with the increasing of thickness of layers and with the weight ratio of TiO2

View Publication Preview PDF
Publication Date
Tue Jun 15 2021
Journal Name
Al-academy
The manifestations of the image theater in the performances of postmodern theater: فينوس حميد محمد جواد
...Show More Authors

When we try to navigate the experiment in search of the repressed and to find the dream of creativity by changing the modularity of the presentation, and the relationship of the characters with the rest of the elements according to a visual vision that reflects the product of the presentation system through the formation of visions and ideas within the textual structure.
We find that the expression of the theatrical act may need to exclude narrative dialogues and turn them into a tangible visual language. Physical and visual expression, and movement review, thus producing a “picture language” through which it is possible to form a new vision, and this is called (image theater), which translates the language of dialogue through lig

... Show More
View Publication Preview PDF
Crossref
Publication Date
Fri Jun 01 2012
Journal Name
Journal Of Engineering
Theoretical and Experimental Investigation of Transient Temperature Distribution in Friction Stir Welding of AA 7020-T53
...Show More Authors

Finite element modeling of transient temperature distribution is used to understand physical phenomena occurring during the dwell (penetration) phase and moving of welding tool in friction stir welding (FSW) of 5mm plate made of 7020-T53 aluminum alloy at 1400rpm and 40mm/min.
Thermocouples are used in locations near to the pin and under shoulder surface to study the welding tool penetration in the workpiece in advance and retreate sides along welding line in three positions (penetrate (start welding) , mid, pullout (end welding)).
Numerical results of ANSYS 12.0 package are compared to experimental data including axial load measurements at different tool rotational speeds (710rpm.900rpm.1120rpm and 1400rpm) Based on the experiment

... Show More
View Publication Preview PDF
Crossref (6)
Crossref
Publication Date
Tue Feb 01 2022
Journal Name
Journal Of Engineering
Numerical analysis of a concrete foundation under a combination of a dynamic and a seismic load
...Show More Authors

Improving in assembling technology has provided machines of higher evaluation with better resistances and managed behavior. This machinery led to remarkably higher dynamic forces and therefore higher stresses. In this paper, a dynamic investigation of rectangular machine diesel and gas engines foundation at the top surface of one-layer dry sand with various states (i.e., loose, medium and dense) was carried out. The dynamic investigation is performed numerically by utilizing limited component programming, PLAXIS 3D. The soil is accepted as flexible totally plastic material submits to Mohr-Coulomb yield basis. A harmonic load is applied at the foundation with amplitude of 10 kPa at a frequency of (10, 15 and 20) HZ and se

... Show More
View Publication Preview PDF
Crossref (1)
Crossref
Publication Date
Mon Feb 01 2016
Journal Name
Journal Of Economics And Administrative Sciences
Entrepreneurship Organizations In the framework of strategic leadership practices Field research in the Ministry of Oil))
...Show More Authors

Abstract

The labeled research deal with (Entrepreneurship Organizations In the framework of strategic leadership practices: Field research in the Ministry of Oil), Search over the possibility of the influence of the practices of strategic leadership Which include

(Determine the strategic direction, The discovery of the fundamental estimators and maintain it, The development of the human capital, and Maintaining of  an organizational culture influential, and Find a balanced regulatory Control) In a Entrepreneurship  in its dimensions and its (innovation, risk, pre-emptive and independence) On group of heads of departments and authorities

... Show More
View Publication Preview PDF
Crossref (3)
Crossref
Publication Date
Sun Apr 09 2017
Journal Name
Ibn Al-haitham Journal For Pure And Applied Sciences
Study the Effect of Fillers and Thermoplastics Content in the Mechanical Properties of Natural Rubber Vulcanized
...Show More Authors

In this research, the mechanical properties of natural rubber blends in different proportions (70:30, 85:15, 100: 0 55:45 and phr) was studied through the use of two types of fillers (carbon black and titanium dioxide Nano) which show through tests conducted on the prepared models that increase fillers content which leads to improve the tensile properties (tensile strength, elastic modulus, elongation, hardness and compressibility). As shown by the results that the presence of polypropylene (PP) in the mix combination works to reduce the degree of intumescent and increase its content in the composition of mixtures which leads to get a great resistance to chemicals (acids, bases and oils).

View Publication Preview PDF
Publication Date
Tue Jul 01 2014
Journal Name
Bulletin Of The Iraq Natural History Museum (p-issn: 1017-8678 , E-issn: 2311-9799)
ROLE OF DOMESTIC CATS FELIS CATUS AS RESERVOIR HOSTS OF INTERNAL PARASITES AND PROTOZOA IN BAGHDAD
...Show More Authors

    Examining of 80 feces samples showed that 31 samples of the house and stray cats harbored either single or mixed infection with eight species of parasites and protozoa with a total infection rate 38.75 %.The results on parasite classes are: Toxocara cati (5%), Ancylostoma tubeforme (3.75%), Capillaria felis(3.75%), Isospora sp.(10%), Cryptosporidium parvum(3.75%), Cryptosporidium muris (6.25%), Toxoplasma gondi (3.75%), Giardia sp.(2.5%) infection from feces of cats that showed single, double and triple infections. Our findings revealed the risk for public health, thus preventive measures should be implemented.

 

View Publication Preview PDF
Publication Date
Wed Jul 01 2015
Journal Name
Journal Of Engineering
Effect of Plasma Shot Peening on Mechanical Properties and Fatigue life of AL-Alloys 2024-T3
...Show More Authors

An Investigation of estimated Mechanical Properties of AL-Alloys 2024-T3, which is the most commonly used in industrial applications, been established experimentally. A new novel Plasma Peening techniques had applied for the whole surfaces of the material by CNC-Plasma machine for 48 specimen, and then a new investigation were toke over to figure the amount of change in mechanical properties and estimated fatigue life. It found that improvement was showing a nonlinear behavior according to peening duration time, speed, peening distance, peening number, and amount of effected power on the depth of the material thickness. The major improvement was at medium speed long duration time normal peening distance. Which shows up t

... Show More
View Publication Preview PDF
Publication Date
Tue Sep 01 2009
Journal Name
Journal Of Economics And Administrative Sciences
The problem of elevating the status of values in scienceStudy in economic thought and macro analysis
...Show More Authors

ان من اهم القضايا التي تثيرها المعرفة البشرية في تجلياتها، وتعبيراتها المفاهيمية، تكمن في مدى تأصلها وانتمائها الى البنى والتشكيلات الموضوعية (في مستوياتها التاريخية) التي تسعى لتفسيرها وادراكها ومضاهاتها. فالينبوع الذي يغرف منه الفكر مادته هو الكيان الاجتماعي المتموضع خارج الوعي والايدولوجيا.

ان قدرة الوعي على ادراك الواقع الموضوعي بخصائصه العامة يشكل الشرط  الضروري لاكتساب الوعي ل

... Show More
View Publication Preview PDF
Crossref