Vibration Measurement and Analysis of knee-Ankle-Foot Orthosis (KAFO) Metal-Metal type

Ayad M.  Takhakh; Jumaa S.  Chiad; Fahad Mohanad  Kadhim

doi:10.31026/j.eng.2014.02.10

Details

Publication Date

Thu May 18 2023

Journal Name

Journal Of Engineering

Volume

20

Issue Number

2

DOI

10.31026/j.eng.2014.02.10

Choose Citation Style

Statistics

View publication

46

Abstract Views

1.8K

Galley Views

620

Statistics

(1)

Vibration Measurement and Analysis of knee-Ankle-Foot Orthosis (KAFO) Metal-Metal type

knee

ankle

foot

orthosis

pressure

stress

acceleration

Ayad M. Takhakh

Jumaa S. Chiad

Fahad Mohanad Kadhim

...Show More Authors

This paper deals with calculate stresses in Knee-Ankle-Foot-Orthosis as a result of the effect vibration during gait cycle for patient wearing KAFO .Experimental part included measurement interface pressure between KAFO and leg due to action muscles and body weigh on Orthosis. also measurement acceleration result from motion of defected leg by accelerometer .Results of Experimental part used input in theoretical part so as to calculate stresses result from applying pressure and acceleration on KAFO by engineering analysis program ANSYS 14.Resultes show stresses values in upper KAFO greater than lower KAFO that is back to muscles more effective in thigh part lead to recoding pressure higher than pressure in shank part.

View Publication Preview PDF

Quick Preview PDF

Publication Date

Sun Oct 21 2018

Journal Name

Al-kindy College Medical Journal

Evaluation of the clinical examination in thediagnosis of acute medial collateral ligament injury of the knee joint in comparism with examination under general anesthesia

MCL.

valgus stress test

Laith Saleem

...Show More Authors

Background: Tear of MCL of the knee is a frequent problem among knee ligaments injuries.Injuries to the MCL are usually caused by contact on the outside of the knee and are accompanied by sharp pain on the inside of the knee. Contrary to most other knee ligaments the medial collateral ligament (MCL) has an excellent ability to heal, being fairly large and well vascularised structure. The vast majority of isolated medial ligament injuries heal without significant long-term problems

Objectives: is to compare between the early clinical examination, and assessment under general anesthesia (GA), and to find out the best methods to assess the MCL tear especially in suspected cases.

Type

View Publication Preview PDF

Publication Date

Sat Dec 17 2011

Journal Name

Journal Of Engineering

Effect of Steering Wheel Vibration on drivers Hands in a Two-Wheel Drivers Hand tractor

Ergonomics

Hand-transmitted vibration

Tractor

vibration exposure

steeren wheel

Ahmed

Mudhfer

Ahmed

Ali

...Show More Authors

The paper presents research results of the vibration transmitted from the steering wheel of the tractor with a 2-wheel drive to the driver’s hands. The vibration measurements were carried out on the tractor randomly chosen from the collage of agriculture / university of Baghdad. Before testing the tractor was examined and adjusted following the producer’s recommendations. The vibration levels were measured during the operation tillage at idling and at full load .The field was 31.7 m above level sea. Soil was treated at soil constant moisture (17-20 %) with depth of plowing (17 cm). During operation the weather temperature was measured (15 C) and humidity was ( 27 % ) The vibration level on the steering wheel was measured and analyzed .T

Preview PDF

Publication Date

Thu Dec 01 2011

Journal Name

Journal Of Engineering

Effect of Steering Wheel Vibration on drivers Hands in a Two-Wheel Drivers Hand tractor

Ergonomics

Hand-transmitted vibration

Tractor

vibration exposure

steere wheel

Ahmed Abd Ali

Mudhfer Kareem

Ahmed Abdul Hussein

Ali Fahad

...Show More Authors

The paper presents research results of the vibration transmitted from the steering wheel of the
tractor with a 2-wheel drive to the driver’s hands. The vibration measurements were carried out on the
tractor randomly chosen from the collage of agriculture / university of Baghdad. Before testing the
tractor was examined and adjusted following the producer’s recommendations. The vibration levels
were measured during the operation tillage at idling and at full load .The field was 3١٫٧ m above level
sea. Soil was treated at soil constant moisture (1٧-20 %) with depth of plowing (١٧ cm). During
operation the weather temperature was measured (15 C) and humidity was ( 27 % ) The vibration level
on the steering whee

View Publication Preview PDF

(1)

Publication Date

Fri Mar 31 2017

Journal Name

Al-khwarizmi Engineering Journal

Active Vibration Suppression of Smart Cantilever Beam with Sliding Mode Observer Using Two Piezoelectric Patches

Smart materials

Active vibration

Piezoelectric

Sliding mode observer

Model ‎reduction

LQR controller

Shibly A.

Mohsin N.

Imad A.

...Show More Authors

This paper presents a vibration suppression control design of cantilever beam using two piezoelectric ‎patches. One patch was used as ‎an actuator element, while the other was used as a sensor. The controller design was designed via the balance realization reduction method to elect the reduced order model that is most controllable and observable. ‎the sliding mode observer was designed to estimate six states from the reduced order model but three states are only used in the control law. Estimating a number of states larger than that used is in order to increase the estimation accuracy. Moreover, the state ‎estimation error is proved bounded. An ‎optimal LQR controller is designed then using the ‎estimated states with the slid

View Publication Preview PDF

(1)

Publication Date

Mon Feb 01 2021

Journal Name

Proceedings Of The Institution Of Civil Engineers - Structures And Buildings

Effect of soil saturation on load transfer in a pile excited by pure vertical vibration

Mohammed Y.

Bushra S.

Faris S.

...Show More Authors

A comparison between the resistance capacity of a single pile excited by two opposite rotary machines embedded in dry and saturated sandy soil was considered experimentally. A small-scale physical model was manufactured to accomplish the experimental work in the laboratory. The physical model consists of: two small motors supplied with eccentric mass 0·012 kg and eccentric distance 20 mm representing the two opposite rotary machines, an aluminum shaft with 20 mm in diameter as the pile, and a steel plate with dimensions of (160 × 160 × 20 mm) as a pile cap. The experimental work was achieved taking the following parameters into consideration, pile embedment depth ratio (L/d; length to diameter) and operating freq

View Publication

(18)

(16)

Publication Date

Tue Dec 01 2020

Journal Name

Minar International Journal Of Applied Sciences And Technology

Electron density spectroscopic measurement in Al laser induced plasma

Mohammed

...Show More Authors

Plasma generated by a 1064 nm pulsed Nd: YAG laser with pulse duration of 10 ns concentrated onto an Al solid target under vacuum pressure was examined spectroscopically. The temperature and electron density specifying the plasma were measured by time-resolved spectroscopy of neutral atom and ion line emissions in the time period range of 300–2000 ns. An echelle spectrograph is utilized to appear the plasma emission lines. The temperature was obtained using the spectral line comparison method and the electron density was calculated using the Stark Broadening (SB) method. The electron density was characterized as a function of laser pulse energy. The time range where the plasma is optically thin and is also in local thermodynamic equilibri

Publication Date

Mon Jan 01 2024

Journal Name

Aip Conference Proceedings

Quality measurement for openstreetmap buildings outlines in Baghdad/Iraq

Tabark

Maythm

...Show More Authors

OpenStreetMap (OSM) is the world’s biggest publicly licensed geographic data collection. Because OSM is rapidly being used in a wide range of applications, researchers have focused their efforts on determining its quality. The OSM buildings data quality is still ambiguous, due to the limitations, and a few researchers have evaluated the OSM buildings data quality through difficulties where the authoritative data are not obtainable. The focus of this research is to analyze and assess the accuracy of OSM buildings including completeness, and positional accuracy methods. Two different study areas in Baghdad city-Iraq have been investigated: Al-Rasheed and Al-Karrada. The process of the (OSM) data evaluation involved identifying the correspon

View Publication

Publication Date

Sat Sep 01 2018

Journal Name

Polyhedron

Novel dichloro (bis {2-[1-(4-methylphenyl)-1H-1, 2, 3-triazol-4-yl-κN3] pyridine-κN}) metal (II) coordination compounds of seven transition metals (Mn, Fe, Co, Ni, Cu, Zn and Cd)

The 1

3-dipolar cycloaddition “click” reaction between an azide and an alkyne to give a 1

2

3-triazole was reported by Huisgen in 1961 [1]. In 2002 the Copper(I)-catalyzed Azide-Alkyne Cycloaddition (CuAAC) to prepare a 1

2

3-triazole was reported [2]

[3]. The existence of relatively basic nitrogen atoms in the 1

2

3-triazole rings

and the possibility of introducing additional donor groups in the substituents (Fig. 1)

made the CuAAC “click” reaction an attractive method to prepare differently substituted 1

2

3-triazoles. These compounds have been used as ligands to coordinate to various metal ions that display a range of applications such as in electrochemical and photochemical studies

in supramolecular chemistry

magnetism

metal-ion sensing and catalysis [4]. The reasons for the success of the “click” reaction

is that it is easy to carry out and is widely applicable. It is not affected by a variety of functional groups

and can be carried out with a variety of Cu(I) catalysts and solvents

including aqueous conditions. The Cu(I) catalysts overcome the high activation energy barrier of the non-catalyzed Huisgen reaction by changing the mechanism of the reaction. A large variety of copper catalysts can be used for the CuAAC reaction

on condition that the maximum concentration of Cu(I) species is generated during the reaction. The pre-catalyst can be a Cu(II) salt (usually CuSO4) together with a reducing agent (often sodium ascorbate) or a Cu(I) compound in the presence of a base or amine ligand and a reducing agent to prevent oxidation to Cu(II). Some strong oxidising cupric salts or complexes such as Cu(OAc)2 also work. The solvent is very flexible from organic to aqueous

with the most commonly used combination water + an alcohol (t-BuOH

MeOH or EtOH). The key role of the solvent or solvent mixture is to solubilize the substrates and Cu(I) catalyst in order to ensure rapid reactions. Such aqueous conditions are very useful for biochemical conjugations

as well as for organic syntheses. We recently reported on the synthesis of a series of differently substituted 1

2

3-triazole chromophores

the substituted 2-(1-phenyl-1H-1

2

3-triazol-4-yl)pyridine ligands [5]

see Fig. 2 middle

with substituents R = H (L1)

CH3 (L2)

OCH3 (L3)

COOH

F

Cl

CN

CF3

O(CH2)3CH3 and N(CH3)2. These versatile ligands were found to coordinate to various first row transition metals

such as manganese

cobalt and nickel [6]. Here we extend the series to include more first row transition metal(II) coordination compounds

iron

copper and zinc

as well as a second row transition metal(II) coordination compound

cadmium

containing the 2-(1-(4-methyl-phenyl)-1H-1

2

3-triazol-1-yl)pyridine chromophore (Fig. 2 right with R = CH3). This series of seven novel coordination compounds is the first series of pyridyl-triazole based transition metal coordination compounds where seven different transition metals are coordinated to the same 1

2

3-triazole chromophore

namely 2-(1-(4-methyl-phenyl)-1H-1

2

3-triazol-1-yl)pyridine.

Kinaan M

...Show More Authors

Preview PDF

Publication Date

Sun Sep 01 2019

Journal Name

2019 11th Computer Science And Electronic Engineering (ceec)

ANN based Measurement for No-Reference Video Quality of Experience Metric

Amal Sufiuh

Rana Fareed

Laith

...Show More Authors

View Publication

(3)

(1)

Publication Date

Fri Oct 01 2010

Journal Name

Radiation Effects And Defects In Solids

An automated autocorrelator for the measurement of high-frequency femtosecond pulses

Benocci R.

...Show More Authors

View Publication

1 2 ... 66 67 68 69 ... 2835 2836