The hydraulic behavior of the flow can be changed by using large-scale geometric roughness elements in open channels. This change can help in controlling erosions and sedimentations along the mainstream of the channel. Roughness elements can be large stone or concrete blocks placed at the channel's bed to impose more resistance in the bed. The geometry of the roughness elements, numbers used, and configuration are parameters that can affect the flow's hydraulic characteristics. In this paper, velocity distribution along the flume was theoretically investigated using a series of tests of T-shape roughness elements, fixed height, arranged in three different configurations, differ in the number of lines of roughness element. These elements were used to find the best configuration of roughness elements that can be applied to change the flow's hydraulic characteristics. ANSYS Parametric Design Language, APDL, and Computational Fluid Dynamics, CFD, was used to simulate the flow in an open channel with roughness elements. CFD can be used to study the hydrodynamics of open channels under different conditions with inclusive details rather than relying on the costly field and time-consuming. Runs were implemented with different conditions, the discharge, and water depth in upstream and downstream of the flume. T-shape roughness elements with height equal to 3cm placed in three different configurations, two lines, four lines, and fully rough configurations were tested. The results show that the effect of roughness elements increasing with increasing the number of lines of roughness elements. Cases of four lines and fully rough configurations have almost the same hydraulic performance by having the same results of the velocity decrease percentage, which is decreased by approximately about 66% and 61% of the control case's velocity in the zone near the roughness elements consequently. But the difference is that four lines configuration is affected in a part of the test section. This behavior increases the velocity values by about 11% in the other side and by about 10% near the free surface in the case of four lines configuration and increased by about 32% above the roughness elements in a fully rough configuration.
The impact of Jurisprudence Rules in Addressing Contemporary security Challenges
Islamic jurisprudence is related to various fields of knowledge, as it is a science of great value, great in impact, and among the most prominent features of jurisprudence comes the jurisprudence rules. It regulates the principles of the doctrine for the jurist. Therefore, the main this research focuses on (the impact of jurisprudence rules in addressing contemporary security challenges). It is the relationship between jurisprudence rules and achieving security. Its fruit would be a statement of the distinguished impact of jurisprudence rules on the stability of the country, and its leading role in maintaining, strengthening, and pre
... Show MoreThe species Bostrichus capucinus (L.) (Coleoptera:Bostrichidae) was reported as a new record for Iraq. Diagnostic characters and some information are given .
Lynn Nottage's Ruined, a Pulitzer Prize play, tackles the plight of women’s survival during the civil war in the Democratic Republic of Congo. The play is a loud scream for the whole world to view the physical violence of women and hear their traumatic memories, hoping that this attempt might save them from their disastrous lives resulting from the brutalities of civil war. In this play, women are portrayed beyond victims of the political and armed conflicts as they serve as a reflection of a serious issue that threatens the human race in general: the continuing dehumanization whereby women are considered minorities and the “others,” even within their own society. By applying a critical analysis technique, the current paper ai
... Show MoreTrigeminal Neuralgia (TN) is one of the most commonly painful cranial neuralgia characterized by paroxysmal attacks as short lasting facial pain along the trigeminal nerve branches. The aim of the present study is to innovate a biochemical relationship between (melatonin, GALNT12 and Zn) and TN and also to examine the biochemical action of tegretol (carbamazepine) as a treatment on the above biochemical parameters. Blood samples were collected from fifty four (54) trigeminal neuralgia patients diagnosed by magnetic radiation image (MRI). Patients were classified into four groups: G3 (40- 70) years composed of (12) diagnosed male (without treatment), G4 (48- 75) years composed of (12) diagnosed female (without treatment), G5 (34- 76)
... Show MoreNineteenth century Gothic literature was deeply concerned with the threats against masculinity. Perhaps one of the most important changes that happened at that time was the emergence of the New Woman model which posed a great threat against masculinity and the male role in the Victorian society. Bram Stoker’s Dracula (1897) portrays female characters who embody this transition in female roles from the domestic wife to the New Woman. This paper focuses on the female characters Mina Murray and Lucy Westenra, their roles in their society, and the different fates they face at the end of the novel, with special focus on Mina’s transformation to the model of the New Woman.
The hero traditionally has such admirable traits as courage, fortitude,
chivalry and patriotism. In the literary works, the hero is the leading
character and the pivot around which all the characters and the events
revolve. The characteristics of the hero usually reflect the cultural values
of his time. Because, in each age, Man's attitudes towards himself and the
world change, different images of the hero emerge.
In Greek Mythology, the hero is frequently favoured by the gods;
therefore, he is himself semi-divine. The Greek hero is of princely birth
and is endowed with good physique, exceptional strength, skill in
athletics and battle, energy and eloquence, like Odysseus who is the hero
of the Odyssey, long
Abstract
The research addresses the specification table and the extent of its use in developing achievement tests, as well as detects the obstacles to its use through a sample of (120) respondents from the faculty members in some Baghdad schools and colleges. After unpacking and processing the data statistically, the research reached several results: the study sample do not use the test map in the development of their tests, as their percentage reached (82%) and there are no statistically significant differences in the use of the specification table by the sample members according to their place of work or the number of years of experience. The results also revealed the most important reasons that prevent the use
... Show MoreThe research focuses on determination of best location of high elevated tank using the required head of pump as a measure for this purpose. Five types of network were used to find the effect of the variation in the discharge and the node elevation on the best location. The most weakness point was determined for each network. Preliminary tank locations were chosen for test along the primary pipe with same interval distance. For each location, the water elevation in tank and pump head was calculated at each hour depending on the pump head that required to achieve the minimum pressure at the most weakness point. Then, the sum of pump heads through the day was determined. The results proved that there is a most economical lo
... Show MoreScrew piles are widely used in supporting structures subjected to pullout forces, such as power towers and offshore structures, and this research investigates their performance in gypseous soil of medium relative density. The bearing capacity and displacement of a single screw pile model inserted in gypseous soil with various diameters (D = 20, 30, and 40) mm are examined in this study. The soil used in the testing had a gypsum content of 40% and the bedding soil had a relative density of 40%. To simulate the pullout testing in the lab, a physical model was manufactured with specific dimensions. Three steel screw piles with helix diameters of 20, 30, and 40 mm are used, with a total length of 500 mm. The helix is continuous over the
... Show MoreThe achievements of the art that we know today are questioned in motives that differ from what art knew before, including dramatic artistic transformations, which he called modern art.
In view of the enormity of such a topic, its ramifications and its complexity, it was necessary to confine its subject to the origin of the motives of the transformations of its first pioneers, and then to stand on what resulted from that of the data of vision in composition and drawing exclusively, and through exploration in that, we got to know the vitality of change from the art of its time.
And by examining the ruling contemporary philosophical concepts and their new standards and their epistemological role in contemporary life, since they includ