The aim of present investigation was Litilizing cow, sheep and chicken bones that included both hollow and flat to produce fat. The extraction rat was increased propotionally with rising temperature and extraction time for both cow and sheep bones. The lowest extraction rat form hollow and flat bones for cow and sheep was 12.66, 6.55, 6.93 and 7% respectively at 60°C for 3 hours. The highest extraction rat for hollow cow bones was 21.90% at 90°C for 5 houers, values for flat cow bones, hollow and flat sheep bones was 15.04, 16.4 and 12.8% respectively at 100°C for 5 hours. While, hollow and flat chicken bones resulted lowest extraction rate, thus thermal treatment was conducted only at 90 °c and showed propotional increase with increasing extraction time, fat rat was 1.10 and 1.08% respectively after 3 hours, values were 1.17 and 1.12% respectively after 4 hours. using the Gas-liquid chromatography "GLC" device for fat bones it was obtained that the fat content are prevailing fatty acids according to its presence ratios in the fat hollow cows bones Oleic acid, Palmitic acid, Stearic acid, Palmitoleic acid, Linoleic acid, Myristic acid respectively, while the fat from flat cows bones according to its presence ratios as Oleic acid comes, Palmitic acid, Stearic acid, Palmitoleic acid, Myristic acid, Linoleic acid, respectively, and that the sequence of fatty acids by its presence in the fat hollow sheep bones ratios was Oleic Acid, Palmitic Acid, Stearic Acid , Palmitoleic Acid, Linoleic Acid, Myristic Acid respectively, and in the fat flat sheep bones as follows Oleic Acid, Palmitic Acid, Stearic Acid, Myristic Acid, Palmitoleic Acid, Linoleic Acid, respectively, while in the fat of hollow chicken bones was as follow Oleic Acid, Palmitic Acid, Linoleic Acid, Palmitoleic Acid, Stearic Acid, Myristic Acid respectively, while flat bones fat were Oleic Acid, Linoleic Acid, Palmitic Acid, Stearic Acid, Palmitoleic Acid, Alpha Linolenic Acid, Myristic Acid respectively, also the results showed that the flat chicken bones contained uniqueness fatty acid (the α- Linolenic Acid).
Islamic jurisprudence is a divine approach capable of confronting all developments that occur in human society and giving appropriate solutions to them. The research discussed opinions related to some contemporary issues according to the rule of no excess or negligence and according to the rules of removing hardship and facilitating in order to reach the appropriate legal ruling for the nature of the situation to which it may be exposed. Man is in paradise, and the research emphasizes the necessity of taking into account the aspect of precaution when deciding on issues, such as the rules of change and the removal of embarrassment
The science of interpretation is considered one of the most important sciences due to its primacy and high status. Because knowledge is honored with the honor of its owner and related to it, and the science of interpretation is related to the Book of God, and from this importance emerges the importance of writing on a subject (from the terms of social organization in the Holy Qur’an); Because it deals with a matter that is considered a necessity in a place, and I called the research (from the terms of social organization in the Holy Qur’an - an analytical study), and the reason for choosing this topic was to clarify those terms and link them to our contemporary reality in order for them to be beacons of guidance and guidance for thos
... Show MoreThis study examined the adsorption behavior of anionic dye (orange G) from aqueous solution onto the raw and activated a mixture of illite, kaolinite and chlorite clays from area of Zorbatiya (east of Iraq).The chemical treatment involved alkali and acid activation. The alkali activation obtained by treated the raw clay (RC) with 5M NaOH (ACSO) and the acid activation founded by treated it with 0.25M HCl (ACH) and 0.25M (ACS). The thermal treatment carried out by calcination the produce activated clay at 750oC for acid activation and 105oC for alkali activation. Batch
... Show MoreNanoparticles of Pb1-xCdxS within the composition of 0≤x≤1 were prepared from the reaction of aqueous solution of cadmium acetate, lead acetate, thiourea, and NaOH by chemical co-precipitation. The prepared samples were characterized by UV-Vis spectroscopy(in the range 300-1100nm) to study the optical properties, AFM and SEM to check the surface morphology(Roughness average and shape) and the particle size. XRD technique was used to determine the crystalline structure, XRD technique was used to determine the purity of the phase and the crystalline structure, The crystalline size average of the nanoparticles have been found to be 20.7, 15.48, 11.9, 11.8, and 13.65 nm for PbS, Pb0.75Cd0.25S,
... Show More
(18)
(6)
In this study, the preparation and characterization of hyacinth plant /chitosan composite, as a heavy metal removal, were done. Water hyacinth plant (Eichhorniacrasspes) was collected from Tigris river in Baghdad. The root and shoot parts of plant were ground to powder. Composite materials were prepared at different ratios of plant part (from 2.9% to 30.3%, wt /wt) which corresponds to (30-500mg) of hyacinth plant (root and shoot) and chitosan. The results showed that all examined ratios of plant parts have an excellent absorption to copper (Cu (II)). Moreover, it was observed that 2.9% corresponds (30mg) of plant root revealed highest removal (82.7%) of Pb (II), while 20.23% of shoot removed 61% of Cd (II) within 24 hr
... Show More
(9)
(6)
This study discussed the effects of doping with silver (Ag) on the optical and structural properties of
CdO nanoparticles at different concentrations 0, 1, 2, 3, 4, 5 wt% prepared by the precipitation method. The
materials were annealed at 550˚C for 1 h. The structural, topographical, and optical properties were
diagnosed by X-ray diffraction analysis, atomic force instrument, and visible and ultraviolet spectrometers.
The results show that the average diameter of the grains depends on the percentage of added silver to the
material, as the diameter decreased from 88.8 to 59.7 nm, and it was found that the roughness increased from
5.56 to 26.5. When studying the optical properties, it was noted that th
(3)
(2)
The chemical composition of wastes of pressed grapes and found that the main components of wastes of pressed grapes, represented by the percentage of moisture was 6.47%, and the proportions are 3.71%. Either carbohydrates amounted to 85.77 %, either in fat models using petroleum ether Petroleum ether) was the increase of 0.27%. estimated the percentage of ash in the sampls was 3.78%, either fiber reached 69.47 %,, in addition to the test extracts towards the growth of seven types of bacteria, which included Bacillus subtilis, Bacillus cereus, Bacillus stearothermophilus, Escherishia coli, Staphylococcus aureus, Salmonella typhimurium and Pseudomonas fluorescens and yeast Candida albicans and Kluyveromyces marxianus, ( diffusion method ).
... Show MoreThis study examined the tagged (the matter, its ruling, and examples of its applications in Ahmadiyya interpretations), the study of devising formulas of commissioning, especially the matter from the book of interpretation, which is: (Ahmadiyyeh’s interpretations), and the contemplative of the nature of (Ahmadiyya’s interpretations) realizes that the cognitive, linguistic and juristic knowledge product and the verses of judgments And other is the focus of this immortal travel, as it is truly a comprehensive book containing what the students of knowledge, scholars and the general public need in terms of interpreting the legal verses, and it is not possible to reach an understanding of the Book of God Almighty, and to clarify his purpo
... Show MoreIn this study, sawdust as a cheap method and abundant raw material was utilized to produce active carbon (SDAC). Physiochemical activation was utilized where potassium hydroxide used as a chemical activating agent and carbon dioxide was used as a physical activating agent. Taguchi method of experimental design was used to find the optimum conditions of SDAC production. The produced SDAC was characterized using SEM to investigate surface morphology and BET to estimate the specific surface area. SDAC was used in aqueous lead ions adsorption. Adsorption process was modeled statistically and represented by an empirical model. The highest specific surface area of SDAC was 688.3 m2/gm. Langmuir and Freundlich isotherms were used to
... Show MoreThe study aims to integrate the visually impaired people into the art connoisseur community through producing special print artworks to enable the visually impaired people to use their other senses to feel artworks by using artistic printing techniques through adding some prominent materials to the printing colors or making an impact that visually impaired people can perceive using their other senses. This study also aims to set up art exhibitions that display tangible works that can enable visually impaired people to feel artwork and understand its elements to enable them to feel it through other senses.
The study follows the experimental method, through using artistic printing techniques, which allow printing with prominent textur