Background: Polycystic ovary syndrome (PCOS) is the most common endocrinopathy affecting women, at reproductive age. PCOS is a chronic hyperandrogenic state that has many significant short-term and long-term implications for patients such as oligomenorrhea, amenorrhea, infertility, diabetes mellitus, cardiovascular disease, increased risk of endometrial cancer, and hirsutism. Objectives: To evaluate the obesity and glycemic criteria among women with polycystic ovary syndrome. Method: A case control designed study was carried out at the National Diabetes Center (NDC) / Al-Mustansiryia University; on 50 participants formed the PCOS group and 50 healthy control participants. Data collected about age, age at menarche and BMI. Also, blood samples examined for FPG and 2-h OGTT test carried out for all the participants. Moreover hormonal assessment for the LH, FSH and total testosterone were done for all participants. Results : PCOS group women age and age at menarche were 27.62 ± 5.74 and 12.0 ± 1.06 years; vs. the control group were 25.42 ± 4.94 and 11.64 ± 0.69 years respectively. All PCOS group were experienced signs and symptoms of ovarian dysfunction, and infertility while the control group did not experience any of such evidences. BMI showed significant difference between study groups (t-test (P < 0.05)); 98% of the PCOS group was obese vs. 58% of the control group. The waist/hip ratio showed insignificant difference (t-test (P > 0.05). Fasting plasma glucose (FPG) showed insignificant difference between the study groups (t-test (P >0.05); about 18% of the PCOS group was prediabetic (Impaired Fasting Glucose, IFG) (100-125mg/dl) and 6% was diabetic (>126mg/dl) whereas the entire control group was normoglycemic. The OGTT showed significant difference between the study groups (ttest (P < 0.05)); about 22% of the PCOS group was prediabetic (Impaired Glucose Tolerance, IGT) (140- 199mg/dl) and 6% was diabetic (>200mg/dl) whereas the entire control group was normoglycemic. PCOS group showed highly significant elevation in the LH level vs. the control group by about four folds (t-test (P < 0.05)). Also, FSH showed similar elevation by about two folds among the PCOS group vs. the control group (t-test (P < 0.05)). Moreover the LH/FSH ratio was elevated by about two folds among the PCOS group vs. the control group (t-test (P < 0.05)). Total serum testosterone of the PCOS group showed significant raise vs. the control group (t-test (P < 0.05)). Whole the PCOS group had A total testosterone level >60 ng/dL and in contrary the entire control group didn't show any elevation >60ng/dl. Conclusion: obesity of android (central) type was frequent and prevalent among PCOS women. About 20-28% of PCOS women was prediabetic or diabetic due to insulin resistance and decreased insulin sensitivity. Hormonal assay of LH, FSH, LH/FSH ratio and total testosterone were all significantly elevated by two folds or more among the PCOS women. It is not essential that a woman who had polycystic ovaries by ultrasound to have PCOS
Itraconazole (ITZ) is an antifungal drug (BCSII) used for the treatment of local and systemic fungal infections. Furthermore, ITZ used as an antifungal prophylaxis for immunocompromised patients.
The objective of the study is to overcome the two problems of low and pH dependent solubility of ITZ by its preparation as floating microparticles.
Firstly, pH-dependent floating microparticles were prepared using oil in water solvent evaporation method, from which the best one (F7) selected as a best pH-dependent formula with composition of ITZ (200mg),EC (800mg), HPMC 15cps (200mg) and safflower oil (2ml) .Then, F7 was compared with the selected Relatively pH-independent ITZ floating microparticles formula wit
... Show More
(2)
(1)
Aim To develop a low-density polyethylene–hydroxyapatite (HA-PE) composite with properties tailored to function as a potential root canal filling material. Methodology Hydroxyapatite and polyethylene mixed with strontium oxide as a radiopacifier were extruded from a single screw extruder fitted with an appropriate die to form fibres. The composition of the composite was optimized with clinical handling and placement in the canal being the prime consideration. The fibres were characterized using infrared spectroscopy (FTIR), and their thermal properties determined using differential scanning calorimetry (DSC). The tensile strength and elastic modulus of the composite fibres and gutta-percha were compared, dry and after 1 month storage in
... Show More
(5)
يمثل الأخذ بالنظام الفيدرالي أطاراً تنظيمياً لشكل الدولة و مرحلة تحول مهمة في بنية الدولة العامة في مختلف مجالاتها، فالانتقال من المركزية في أدارة الشؤون العامة للدولة الى النمط الفيدرالي يمثل تحولا بنيوياً وسيكولوجياً ،حيث يكون هنالك توزيع مكاني - عمودي للسلطة والثروة بين الوحدات المكونة للدولة بشكل يختلف كليا عن الحالة المركزية، ونجد صور تنظيمية عديدة تتأسس ضمن اطار الفيدرالية العام ،
... Show More
The increasing requirement and use of dental implant treatments has rendered dental implantology indispensable in dentistry. The aim of this study is to determine the optimum concentration of calcium silicate to be incorporated into a polyetherketoneketone (PEKK) matrix used as an implant material to enhance the bioactivity and mechanical properties of the composite compared with unmodified PEKK. In this study, different weight percentage (wt%) of micro-calcium silicate (m-CS) is incorporated into PEKK with ethanol as a binder. Subsequently, the mixture is dried in a forced convection oven at 120°C and poured into customized molds to fabricate a bioactive composite via compression molding (310°C, 15 MPa, and 20 min holding time
... Show More
(6)
(9)
A comprehensive review focuses on 3D network-on-chip (NoC) simulators and plugins while paying attention to the 2D simulators as the baseline is presented. Discussions include the programming languages, installation configuration, platforms and operating systems for the respective simulators. In addition, the simulator’s properties and plugins for design metrics evaluations are addressed. This review is intended for the early career researchers starting in 3D NoC, offering selection guidelines on the right tools for the targeted NoC architecture, design, and requirements.
(11)
(11)
The aerodynamic and elastic forces may cause an oscillation of the structure such as the high frequency of the airfoil surfaces and the dynamic instability occurring in an aircraft in flight and failure may occur at a speed called flutter speed. In this work, analytical and numerical investigations of flutter limits of thin plates have been carried out. The flutter speed of rectangular plates were obtained and compared with some published results. Different design parameters were investigated such as aspect ratio, thickness and their effects on flutter velocity. It was found that the structural mode shape plays an important role in the determination of the flutter speed and the coupling between the bending and torsional mode is the main
... Show MoreThis study was carried out to prepare and characterize domperidone nanoparticles to enhance solubility and the release rate. Domperidone is practically insoluble in water and has low and an erratic bioavailability range from 13%-17%. The domperidone nanoparticles were prepared by solvent/antisolvent precipitation method at different polymer:drug ratios of 1:1 and 2:1 using different polymers and grades of poly vinyl pyrolidone, hydroxy propyl methyl cellulose and sodium carboxymethyl cellulose as stabilizers. The effect of polymer type, ratio of polymer:drug, solvent:antisolvent ratio, stirring rate and stirring time on the particle size, were investigated and found to have a significant (p? 0.05) effect on particle size. The best formul
... Show More
(17)
A polycrystalline CdSe thin films doped with (5wt%) of Cu was fabricated using vacuum evaporation technique in the substrate temperature range(Ts=RT-250)oC on glass substrates of the thickness(0.8?m). The structure of these films are determined by X-ray diffraction (XRD). The X-ray diffraction studies shows that the structure is polycrystalline with hexagonal structure, and there are strong peaks at the direction (200) at (Ts=RT-150) oC, while at higher substrate temperature(Ts=150-250) oC the structure is single crystal. The optical properties as a function of Ts were studied. The absorption, transmission, and reflection has been studied, The optical energy gap (Eg)increases with increase of substrate temperature from (1.65
... Show More
The present work provides a list of all amphibians and reptiles recorded from Iraq up to 2014. It includes 115 species (105 species of reptiles and 10 species of amphibians) dating back to 25 families (20 families of reptiles and 5 families of amphibians). Conservation status of each species was mentioned.