The current study involves placing 135 boreholes drilled to a depth of 10 m below the existing ground level. Three standard penetration tests (SPT) are performed at depths of 1.5, 6, and 9.5 m for each borehole. To produce thematic maps with coordinates and depths for the bearing capacity variation of the soil, a numerical analysis was conducted using MATLAB software. Despite several-order interpolation polynomials being used to estimate the bearing capacity of soil, the first-order polynomial was the best among the other trials due to its simplicity and fast calculations. Additionally, the root mean squared error (RMSE) was almost the same for the all of the tried models. The results of the study can be summarized by the production

       The Euphrates River Basin in Iraq suffers from climate changes represented by the scarcity of precipitation and the increase in temperatures, which is directly reflected in the discharge rates and the increase in total dissolved solids, and consequently, the increase in the dissolved loads in the river. Four measurement stations (Haditha, Ramadi, Fallujah, and Al-Hindiya) in the upper reach of the Euphrates River were investigated. Available data were analyzed from 1970 to 2020 related to precipitation (mm) and temperatures (°C). The results showed a clear decrease in precipitation rates over the years, while a clear increase in air temperature rates was observed. The discharge rates decreased temporally and spatially downs

Concentrations and distribution of major, minor, and trace elements were
studied in thirteen sediment samples from Al-Hammar Marsh.
Multivariate statistical techniques such as Principal Component Analysis (PCA)
and Agglomerative Hierarchal Cluster Analysis (AHCA) as well as pollution
analysis such as Enrichment Factor (EF) were used to process the data and identify
the possible sources of elemental constituents in sediment samples.Results of
chemical analysis revealed that Major element mean concentrations were in the
order of Ca> Si> K> Mg> and minor elements were in the order of Al> Fe>S>Cl>
Ti> P>Mn> Sr> N and trace elements were in the order of Cr> Ni> Zr>V>Zn&gt

Election study included four sites for the waters in area of Youssifiyah south of Baghdad (river water, tank water, liquefactions water, and water filtrate and seethed and purifier by alum and chloride), the samples were collected during the month of June in 2007. Temperature, electrical conductivity and acidity are measured. Also , the concentration of chloride , sulphate , carbonate , nitrate , sodium , calcium , magnesium , hard total and total dissolved substances are determined , as well as heavy metals assess environmental risk (such as Cu, Pb, Zn, Fe). It was also a study of bacterial totals included both total Bacteria (TB) and Total Coliform Bacteria (TC) and Fecal Coliform (FC) and Fecal Streptococci (FS). The stu

    Three monogenean species of the genus Gyrodactylus viz. G. cotti Roman, 1956 on gills of Planiliza abu, G. mikailovi Ergens & Ibragimov, 1976 on gills of Chondrostoma regium and G. prostae Ergens, 1963 on gills of Alburnus caeruleus were recorded from Tigris river at Al-Shawwaka region, Baghdad. The description and measurements of these parasites as well as their illustrations where given. All these parasites are recorded here for the first time in Iraq.  
 

This work deals with the effect of adding aluminum nanoparticles on the mechanical properties, micro-hardness and porosity of memory-shape alloys (Cu-Al-Ni). These alloys have wide applications in various industrial fields such as (high damping compounds and self-lubricating applications). The samples are manufactured using the powder metallurgy method, which involved pressing in only one direction and sintered in a furnace surrounded by an inert gas. Four percentages (0%, 5%, 10%, and 15%) of aluminum nanoparticles were fabricated, which depended on the weight of aluminum powder (13%) in the sample under study. To find out which phase is responsible for the reliability of the formation of this type of alloy and its porosity, X-ray diffr

Shatt Al-Arab River in Al Basrah, Iraq, has recently recorded massive levels of TDS values (Total Dissolved Solids) in the water as a result of reduced fresh water discharge from sources, causing the river to become salinized due to salt wedge intrusion. Therefore, a block dam in the south reach is required to salt intrusion prevention. The main objective of this research is to simulate the hydraulic impact of a suggested barrage in Ras Al Besha on the Shatt Al-Arab River. The HEC-RAS (5.0.7) model was used to develop a one-dimensional unsteady model to gaining an understanding of the proposed barrage's influence on river behaviour. The daily discharges of the Tigris River provided as the upstream boundary conditions, wh

    Three different rotational speeds (800, 1000 and 1250 rpm) and traverse speeds of (0.42 mm/sec) at a constant taped pin have been employed to produce the stir zones generated from friction stir processing (FSP) of near eutectic Al- 14 wt.% Si alloy. The processed samples were thoroughly analyzed macroscopically and microscopically. The as-cast microstructure of eutectic (α Al+ Si) and primary Si were fragmented to produce spheroidization of small size of Si and deformed matrix. The stir zones showed an increase in hardness from around 45-50 Hv for as-cast to 40-65 depending on the variables applied. All the processed samples were characterized by advanced and retreated regions with large single piping defects formed m

In the present work, the radioactivity of ten soil specimens has been measured, which were gathered from various sites from AL-Taimeem area in Al-Anbar province, The qualitative activity of natural radionuclides ²³⁸U, ²³²Th and ⁴⁰K for soil specimens were evaluated by utilizing gamma-ray spectroscopy with NaI(Tl) detector of (3"×3") dimension. The results revealed that, the qualitative activity, for ²³⁸U was varied from (14.730 Bq/kg) to (28.070 Bq/kg), for ²³²Th was varied from (16.510 Bq/kg) to (29.480 Bq/kg), for ⁴⁰K was varied from (143.820 Bq/kg) to (231.550 Bq/kg) ,with an average values of (21.152±2.98 Bq/kg) , (24.219±3.93 Bq/kg), (190.720±22.20 Bq/kg), success