many painters tried to mix colors with Music by direct employment through colorful musical pieces or the use of multiple instruments and techniques , or vice versa, including the French artist )Robert Stroben(, he transferred the piece of music to be depicted on the painting and worked on the tones of music (Johann Sebastian Bach) by dropping the color on the lines of the musical scale, for example (the C tone) ranging from brown to red ( Tone La A) from gray to orange, and so on, the presence of links and similarity factors between the world of music and the world of colors facilitated the process of linking musical notes with colors, the most famous of which was presented by the world (Newton) in the circle of basic colors and linking them with musical notes (Du tone = violet color) - (Ri tone = indigo color) - (Mi tone = blue color) - (Fa tone = green color) - (Sol tone = yellow color) - (La tone = orange color) - (C tone = red color). But this circuit is not enough in converting the musical note to a specific color. It is one of the basics of musicology. The notes are repeated in every (octave) but by increasing the speed of their frequencies. The melodies are based on the major scales, which seem bright, cheerful and optimistic, while the minor scales (miner) seem bleak. Serious and sad. This is what the German scientist (Goethe) sees as there is a similarity between the two worlds of colors and music. In the “melody field” we find the two musical scales (small and large) or what is known as (major and minor), and he sees the contrast between them in the “color field” in degrees of lightness and darkness. On the other hand, we find that colors differ in their energies according to color, as the scientist (Munsel) introduced the color measurement system through (the color is H, the amount of its saturation S and the amount of luminance v), and when creating a (Munsell) of colors, we find that it is not symmetrical, so pure, saturated red extends farther From the central axis about greenish-blue, as well as for the value (V), the blue-purple colors reach their full saturation when the value (V) is very low, and some colors such as yellow retain a high value (V) and high saturation. Therefore, the result of a (genus) is a three-dimensional quasi-spherical solid. According to the above, a color model representing the musical notes was formulated according to their position from the octave and according to their presence in a high or low scale, and the frequency of the sound wave was calculated, corresponding to the amount of the corresponding light wave frequency divided by (terra) /(107) multiplied by x(1.05) And it was applied in the samples of this research.
Let R be a ring with identity and M be a right unitary R-module. In this paper we
introduce the notion of strongly coretractable modules. Some basic properties of this
class of modules are investigated and some relationships between these modules and
other related concepts are introduced.
We define skew matrix gamma ring and describe the constitution of Jordan left centralizers and derivations on skew matrix gamma ring on a -ring. We also show the properties of these concepts.
The nucleon momentum distributions (NMD) for the ground state and elastic electron scattering form factors have been calculated in the framework of the coherent fluctuation model and expressed in terms of the weight function (fluctuation function). The weight function has been related to the nucleon density distributions of nuclei and determined from theory and experiment. The nucleon density distributions (NDD) is derived from a simple method based on the use of the single particle wave functions of the harmonic oscillator potential and the occupation numbers of the states. The feature of long-tail behavior at high momentum region of the NMD has been obtained using both the theoretical and experimental weight functions. The observed ele
... Show MoreThis paper predicts the resilient modulus (Mr) for warm mix asphalt (WMA) mixtures prepared using aspha-min. Various predictor variables were analyzed, including asphalt cement types, asphalt contents, nominal maximum aggregate sizes (NMAS), filler content, test temperatures, and loading times. Univariate and multivariate analyses were conducted to examine the behavior of each predictor variable individually and collectively. Through univariate analysis, it was observed that Mr exhibited an inverse trend with asphalt cement grade, NMAS, test temperature, and load duration. Although Mr increased slightly with higher filler and asphalt content, the magnitude of this increase was minimal. Multivariate analysis revealed that the rate of change
... Show MoreThe soft sets were known since 1999, and because of their wide applications and their great flexibility to solve the problems, we used these concepts to define new types of soft limit points, that we called soft turning points.Finally, we used these points to define new types of soft separation axioms and we study their properties.
The preparation of a new Azo compounds of highly conjugated dimeric and polymeric liquid crystal to achieve the crystalline characteristics Which have structures assigned based on elemental analysis, IR 1HNMR and CHNS-O while mesogenic properties have been set for DSC and hot-stage polarizing optical microscopy. The compounds show enantiotropicnematic phase being displayed. The compounds show photoluminescence properties in the organic solution at room temperature, with the fluorescence band centered around 400 nm.
Today’s modern medical imaging research faces the challenge of detecting brain tumor through Magnetic Resonance Images (MRI). Normally, to produce images of soft tissue of human body, MRI images are used by experts. It is used for analysis of human organs to replace surgery. For brain tumor detection, image segmentation is required. For this purpose, the brain is partitioned into two distinct regions. This is considered to be one of the most important but difficult part of the process of detecting brain tumor. Hence, it is highly necessary that segmentation of the MRI images must be done accurately before asking the computer to do the exact diagnosis. Earlier, a variety of algorithms were developed for segmentation of MRI images by usin
... Show MoreAn NH3 gas sensor was prepared from nanocomposite films of indium oxide-copper oxide mixtures with ratios of 0 , 10 , and 20 Vol % of copper oxide. The films were deposited on a glass substrate using chemical spray pyrolysis method (CSP) at 400oC. The structural properties were studied by using X-ray diffraction (XRD) and atomic force microscopy ( AFM). The structural results showed that the prepared thin films are polycrystalline, with nano grain size. By mixing copper oxide with indium oxide, the grain size of the prepared thin films was decreased and the surface roughness was increased. The UV-Visible spectrometer analysis showed that the prepared thin films have high transmittance.
... Show MoreNew isatinic hydrazone Schiff-base ligands, namely furan-2-carboxylic acid (2-oxo-1,2-dihydro-indol- 3-ylidene)-hydrazide (L1), thiophene-2-carboxylic acid (2- oxo-1,2-dihydro-indol-3-ylidene)-hydrazide (L2) and 2-(pyridine-2-yl-hydrazono)-1,2-dihydro-indol-3-one) (L3) are reported. The ligands were prepared by the condensation of furan-2-carboxylic acid hydrazide (L1), thiophene- 2-carboxylic acid hydrazide (L2), and 2-hydrazino pyridine (L3) with isatine. Monomeric complexes were prepared from the reaction of the corresponding metal chloride with the ligands. The ligands and their nine new complexes of the general formulae [M(Ln)2]Cl2 [where M = Co(II), Zn(II) and Cd(II); n = L1, L2 and L3] were characterised by spectroscopic methods (FTI
... Show MoreThe present study aims to detect the distribution of dfrA1 and cat1 antibiotic resistance genes among uropathogenic Escherichia coli (UPEC) in pregnant teen women and determine their susceptibility to common antibiotic uses. We collected urine (116) samples from patients in hospitals in Baghdad, Iraq. Isolation and identification of bacteria (culturing, biochemical test, and genetically by 16S rRNA gene), antibiotic susceptibility tests (eight antibiotics), and detection of the dfrA1 and cat1 resistance genes, and used SPSS program for statistically analyzing the results. The distributed UPEC in patients most than another causative agent in percentage (50%). It was highly resistan
... Show More