Four subsurface sections and electrical, porosity logs, and gamma-ray logs of the Khasib Formation (age Late Turonian-Lower Coniacian) were studied to identify reservoir characteristics and to evaluate the reservoir properties of the Khasib reservoir units in the East Baghdad oilfield. The lithology of the formation is limestone throughout the whole sequence in all studied wells EB-83, EB-87, EB-92, and EB94. It is bounded conformably from the top by Tanuma Formation and has a conformable lower contact with Kifl Formation. The lower and upper boundaries of the formation were determined using well log analysis, and the formation was divided into three main rock units (Kh1, Kh2, and Kh3), depending on the porosity logs. The porosity was calculated using acoustic or sonic, neutron, and density logs. The effective porosity (average 0.0 - 0.32 %) is the predominant porosity in the formation and to less extent; the secondary porosity. The volume of shale is very low (average 0.0 - 0.13 %), indicating limestone is the main rock of the Khasib Formation. The study of the reservoir water (average 0.11- 1.0%) and hydrocarbon saturations (average 0.0 - 0.88 %) showed that the formation contains varying proportions and quantities of water and hydrocarbons suspended in the wall void, and hydrocarbons capable of being produced. The lithological study reflected that the predominant lithic formation is limestone. It was found that Kh 2 unit is the best oil reservoir unit in all selected wells in terms of porosity, water saturation, diagenesis processes, and microfacies analysis.
A field experiment was conducted to grow the wheat crop during the fall season 2020 in Karbala province, north of Ain Al-Tamr District in two locations of different textures and parent materials. The first site (calcareous soil) with a sandy loam texture, is located at (44° 40′ 37′) east longitude and (32° 41′ 34′) north latitude, at an altitude of 32 m above sea level, and an area of 20 hectares. As for the second location (gypsum soil) with a loam texture, it is located at a longitude (45° 41′ 39′) east and a latitude (33° 43′ 34′ north) and at an altitude of 33 m above sea level and an area of 20 hectares. To find out the effect of different tillage systems on water productivity and wheat yield under center pivot irri
... Show MoreThe division partitioning technique has been used to analyze the four electron systems into six-pairs electronic wave functions for ( for the Beryllium atom in its excited state (1s2 2s 3s ) and like ions ( B+1 ,C+2 ) using Hartree-Fock wave functions . The aim of this work is to study atomic scattering form factor f(s) for and nuclear magnetic shielding constant. The results are obtained numerically by using the computer software (Mathcad).
We studied the effect of certain environmental conditions for removing heavy metal elements from contaminated aqueous solutions (Cd, Cu, Pb, Fe, Zn, Ni, Cr) using the bacterium Bacillus subtilis to appoint the optimal conditions for removal ,The best optimum temperature range for two isolate was 30-35○C while the hydrogen number for the maximum mineral removal range was 6-7. The best primary mineral removal was 100 mg/L, while the maximum removal for all minerals was obtained after 6 hrs of Cu element time and the maximum removal efficiency was obtained after 24 hrs of Cu element. The results have proved that the best aeration for maximum removal was obtained at rotation speed of 150 rpm/minute. Inoculums of 5ml/100ml which contained 1
... Show MoreBackground: Low hemoglobin levels and lead exposure remain significant health issues in many parts of the world, often occurring together, however most of the researches concentrate on the effect of high levels of lead .This study aimed to demonstrate the effect of blood lead level on hemoglobin and packed cell volume (PCV).
Patients and Methods: Fifty eight adult volunteers were enrolled in this study with age range between 23 and 55 years, working in the different departments in medical college of Baghdad University. Whole blood was withdrawn in EDTA tubes. Hemoglobin and PCV were measured and blood lead level was estimated using blood lead testing system including lead care kit and lead care analyzer.
Results: After measuring bl
This study was conducted from January to October 2014, the samples were
collected monthly from four stations in AL-Diwaniya River at AL-Diwaniya city.
Phytoplankton species which are diagnosed during study period are (506) and the
numbers of common types in four sites are (61). Bacillariophyceae is dominate on
other classes and Chlorophyceae, Cyanophyceae, Dinophyceae then Chrysophyceae
and Euglenophyceae. The study shows that there are (150), (144), (118) and (94)
species in the first, second, third and fourth sites. The species that have highs numbers
are (Achnanthes, Cymbella, Nitzschia, Navicula). Other types are dominant in their
existence and number during study period (Cycltella comta, Cylotella Ocellata,
One of the main parts in hydraulic system is directional control valve, which is needed in order to operate hydraulic actuator. Practically, a conventional directional control valve has complex construction and moving parts, such as spool. Alternatively, a proposed Magneto-rheological (MR) directional control valve can offer a better solution without any moving parts by means of MR fluid. MR fluid consists of stable suspension of micro-sized magnetic particles dispersed in carrier medium like hydrocarbon oil. The main objectives of this present research are to design a MR directional control valve using MR fluid, to analyse its magnetic circuit using FEMM software, and to study and simulate the performance of this valve. In this research, a
... Show MoreThe study discussed here deals with the isolation of Aspergillus niger from palm dates, the formal and the most famous fruit in Iraq, to test and qualify this fungus isolate for its ability to produce citric acid. Submerged fermentation technique was used in the fermentation process. A.niger isolated from “Zahdi” Palme dates was used in the study of the fermentation kinetics to get the production efficiency of citric acid. Kinetics of CA production via fermentation by A. niger S11 was evaluated within 432 h fermentation time and under submerged conditions of 11% (w/v) sucrose, 5% (v/v) inoculum size, pH 4, 30 °C and 150 rpm. The maximum citric acid produced was (37.116 g/l). Kine
In this work, excess properties (eg excess molar volume (VE), excess viscosity (ȠE), excess Gibbs free energy of activation of viscos flow (ΔG* E) and molar refraction changes (ΔnD) of binary solvent mixtures of tetrahydrofurfuryl alcohol (THFA) with aromatic hydrocarbons (benzene, toluene and p-xylene) have been calculated. This was achieved by determining the physical properties including density ρ, viscosity Ƞ and refraction index nD of liquid mixtures at 298.15 K. Results of the excess parameters and deviation functions for the binary solvent mixtures at 298.15 K have been discussed by molecular interactions that occur in these mixtures. Generally, parameters showed negative values and have been found to fit well to Redlich-Kister
... Show More