A cermet (ceramic-metal) composite have been prepared from alumina (γ-Al2O3) reinforced with aluminum (Al) for the concentrations of (0, 10, 20, 30, 40, & 50) wt. %Al. The cermet was formed by single axial pressing, sintered in vacuum atmosphere. Compaction behaviors were studied in solid state sintering at sintering temperatures (400, 450, & 550) °C, sintering times (2, 4, & 6) hrs., and forming pressures (5, 10, 15) MPa, also in liquid phase sintering at (800 °C). The cermet was characterized by x-ray diffraction (XRD) and by scanning electron microscope (SEM), also physical and mechanical properties have been studied. SEM results showed the Al flowing inside the ceramic body due to uniform distribution of Al particles and due to sintering temperature (800 °C) have been used. XRD results showed that there is no new phase formed between Al and Al2O3 after sintering due to there is no chemical reaction but physical reaction between them. The existence of Al enhanced the physical properties as the sintering (time & temperature) and pressure increase. Hardness values increased to 30 wt. % Al then decreased due to Al ductility. The oxide layer on the friction surfaces played important role for increasing wear rate.
.
This study was conducted to isolate and identify killer yeast Hanseniaspora uvarum from dates vinegar and measurement the ability of this yeast to produce killer toxin. The antimicrobial activity of the concentrated supernatant containing partially purified concentrated killer toxin was also detected against several pathogenic bacteria and yeast species, which includes two types of yeast Rhodotorula mucilaginosa and Candida tropicalis and four human pathogenic bacteria Staphylococcus aureus, Escherichia coli, Klebsiella pneumoniae and Pseudomonas aeurginosa. In addition, the antagonistic activity of examined yeast have been studied toward four types of fungi, where two are pathogenic
... Show More
(6)
(2)
This paper investigated the fatigue life behavior of two composite materials subjected to different times of shot peening (2, 4 and 6 min).The first material prepared from unsaturated polyester with E-glass reinforcement by 33% volume fraction. While, the second one was prepared from unsaturated polyester with aluminum powder by2.5% volume fraction. The experimental results showed that the improvement in endurance limit was obtained (for the first material) at 2, 4 and 6 min shot peening times where the percentage of maximum improvement was 25% at shot peening time of 6 min. While, the endurance limit of the second material decreased at shot peening times of 2, 4 and 6 min where the percentage of maximum reduction was 29 % at shot peenin
... Show MoreIn this study, the flexural performance of a new composite beam–slab system filled with concrete material was investigated, where this system was mainly prepared from lightweight cold-formed steel sections of a beam and a deck slab for carrying heavy floor loads as another concept of a conventional composite system with a lower cost impact. For this purpose, seven samples of a profile steel sheet–dry board deck slab (PSSDB/PDS) carried by a steel cold-formed C-purlins beam (CB) were prepared and named “composite CBPDS specimen”, which were tested under a static bending load. Specifically, the effects of the profile steel sheet (PSS) direction (parallel or perpendicular to the span of the specimen) using different C-purlins c
... Show More
(5)
(4)
(1)
(1)
In this paper the reinforced materials manufactured from steel continues fibers are used in Aluminum matrix to build a composite material. Most of researches concentrated on reinforced materials and its position in the matrix according to its size and distribution, and their effects on the magnitude of different kinds of the stresses, so this paper presents and concentrate on the geometrical shape of reinforced material and its effects on the internal stresses and strains on the composite strength using FEM as a method for analysis after loaded by certain force showing the deference magnitudes of stresses according to the different geometrical shapes of reinforced materials.
It is from the greatness of God Almighty and from him that he facilitated for me to delve into the immersion of the hadith of the Prophet in my doctoral dissertation, then I found it a fertile ground for the cultivation of scientific results.
Through this work, I chose the topic (Replies of Al-Aini to Ibn Malik in his book Umdat Al-Qari Sharh Sahih Al-Bukhari) because of its scientific impact, as such topics inspire in the soul of the follower and the student a lot of contemplation and great care to understand the texts and then come up with a result that is almost close. It is correct, and my current situation in this research is the condition of many scholars, not without errors and omissions. Whatever was correct is by the grace of
Unter Exilliteratur versteht man „die literarische Produktion von Autoren, die wegen politischer, religiöser oder rassistischer Verfolgung gezwungen sind, sich an einem anderen als dem von ihnen gewünschten Lebens- und Arbeitsort aufzuhalten.“[1] Deswegen unterscheidet sich „Migration“ von „Exil“ dadurch, dass sie freiwillige Auswanderung ist. Bereits in der Antike und auch im Mittelalter gab es Schriftsteller, die vor Zensur oder politischer Verfolgung ins Exil geflohen sind, wie zum Beispiel der griechische Satiriker des
... Show MoreBackground: Most adult smokers start smoking regularly some time before 18 years of age. Cigarette smoking is a major ‘preventable’ cause of morbidity and mortality worldwide. It is well-known that smoking has hazardous effect on many systems like pulmonary and cardiovascular system.
Objectives: Study the prevalence of smoking among school pupils according to the mode of smoking, age, school grade, school environment and possible health risk associated with smoking. Type of the study: A cross-sectional study.
Methods: Study was conducted between 1st of March 2014 to 30th of May 2014 at Al-Doura/Al- Kurkh/Baghdad by using convenient sample, including all pupils from 6 schools. The schools were 2 secondary schools, 3 in
... Show More
Post-structural critical studies highlighted the importance of studying the texts surrounding the text as an important part in the process of receiving and understanding texts, and although this topic was dealt with by the ancient Arabs and Europeans, interest in it appeared clearly after the appearance of Gerard Genet's book (SEUILS), which separated it Text Thresholds. Or what he called paratexte, and dealt with them with interest as he reads them on books. With the development of semiotic studies, interest in paratexte studies began in a broader way and in various literary and non-literary texts, including journalistic texts. And since specialized magazines are one of the press releases that enjoy their privacy in terms of topics and
... Show More
Expressions of Gratitude in American English and Iraqi Arabic (). Expressing gratitude is one of the most frequently occurring communicative acts in...