The demarcation in general and maritime borders in particular is an important process between any two states to define their respective regional Borders and their economic resources. This research is focused on the way in which demarcation took place between Iraq's maritime borders on the one hand and the Kuwaiti side on the other. Through satellite technology (Landsat8) and GIS can be identified the area and how the demarcation was done. The most important in addition, positive points of the demarcation have been explained. It was given a full description of the importance of the economic zone and Highlighting Iraq's most important marine facilities. More than one map of Iraq can be integrated and redesigned by GIS. This work has been talking about the most important vital installations in the region (Iraqi port of Faw AL- Kabeer and Mubarak port of Kuwait) and put them in Comparison with the negative and positive aspects affecting on two sides. In addition, the focus is on the most important economic and spatial Challenges for both ports. Finally, effective ideas and solutions have been offered to reduce economic adversities between the two sides.
In this work, the effect of annealing temperature on the electrical properties are studied of p-Se/ n-Si solar cell, which p-Se are deposit by DC planar magnetron sputtering technique on crystal silicon. The chamber was pumped down to 2×10−5 mbar before admitting the gas in. The gas was Ar. The sputtering pressure varied within the range of 4x10-1 - 8x10-2mbar by adjusting the pumping speed through the opening control of throttle valve. The electrical properties are included the C-V and I-V measurements. From C-V measurements, the Vbi are calculated while from I-V measurements, the efficiency of solar cell is calculated.
The present study investigates the realization and significance of textual themes in the organizational structure of M.A theses and Ph.D. dissertations, namely: the abstracts, introductions and conclusions, since in such parts the students depend on their own expressions, styles and constructions to express different viewpoints, plans, inferences, etc. The study also investigates the similarities and differences between M.A theses and Ph.D. dissertations concerning the use of textual themes;it sets out to conduct a detailed analysis of textual themes used in such texts. In conducting such an analysis, the study adopts Halliday's (1994) approach of textual themes. The results of such an analysis have clearly shown that, in spite of the di
... Show MoreIn this study, out of 50 isolates of some nosocomial infections from some Baghdad hospitals, only 13 (26%) were identified as Escherichia coli. Depending on selective media, morphological and biochemical tests the species was then confirmed by molecular methods. Later on antimicrobial resistance test was performed by the Kirby-Bauer method. The molecular characterization of blaTEM and blaCTX-M genes in different clinical isolates of E. coli was done through polymerase chain reaction (PCR) by utilizing special primers. These genes were positive to only 4 (30.7%) isolates. The sequence of nucleotides of positive genes was carried out for four isolates. The results showed that there was no vari
... Show More
(2)
(1)
Fourteen morphologically varied Ricinus communis L. seeds were collected from different localities in Egypt, El-Sudan and Saudi Arabia. Seed morphology and ITS barcoding analysis were performed to assess their diversity and phylogenetic relationship. Sequence’s alignment of nrITS region from different accessions display high levels of genetic similarities. Cluster analysis could not group different accessions according to their geographical distribution. Nevertheless, the genetic barcodes are interestingly matched with the morphological features of the Ricinus seeds. In conclusion, seed morphology proved to be a valuable tool in evaluating biodiversity and phylogenetic relationship in plant species with different loca
... Show More
(2)
(1)
The purpose of this study was to measure the radon concentration of some dried fruit and grain samples which were consumed as a meal. This is performed by counting the alpha tracks emitted from radon by exposing the CR-39 detector. Measurements indicated that the highest concentration of radon in dried fruit samples was in dried coconut sample 69.89247 Bq/m3, and the lowest concentration of radon was in figs 50.40323 Bq/m3, while the highest concentration of radon was in grain samples in oats was 61.82796 Bq/m3, The lowest concentration of radon was in Iraqi bulgur was 48.3871 Bq/m3, These results are due to the type and characteristics of the soil. Also sho
... Show More
(2)
(2)
Natural bentonite (B) mineral clay was modified by anionic surfactant sodium dodecyl sulfate (SDS) and characterized using different techniques such as: FTIR spectroscopy, scanning electron microscopy (SEM) and X-Ray diffraction (XRD). The bentonite and modified bentonite were used as adsorbents for the adsorption of methyl violet (MV) from aqueous solutions. The adsorption study was carried out at different conditions such as: contact time, pH value and adsorbent weight. The adsorption kinetic described by pseudo– first order and pseudo – second order equilibrium experimental data described by Langmuir, Freundlich and Temkin isotherm models. The thermodynamic parameters standard free energy ( ), standard entropy ( ) standa
... Show More
(1)
Background: Oral squamous cell carcinoma continues to be a major health problem in Iraq as well as in other countries. Many attempts were made to study molecular markers in oral squamous cell carcinoma and to link them to tumor grade, stage and prognosis, besides studying their role in carcinogenesis. The present study has been designed to detect mRNA of c-myc in oral squamous cell carcinoma compared to oral dysplasia and to link the marker to grade and degree of the two pathologies.
Materials and methods: Forty two cases, including 30 cases of oral squamous cell carcinoma and 12 cases of oral dysplasia were included in this study. Sections on positively charged slides were made from their paraffin blocks
(1)
In this work, a reactive DC magnetron sputtering technique was used to prepare TiO2 thin films. The variation in argon and oxygen gases mixing ratios (4:1, 2:1, 1:1, 1:2, 1:4) was used to achieve optimal properties for gas sensing. In addition, an analysis of the optical XRD properties of TiO2 thin films is presented. High-quality and uniform nanocrystalline films were obtained at a working gas pressure of 0.25 mbar and 1:4 (Ar/O2) gas mixture. The optical properties showed a transparent thin film with uniform adherence to the substrate. The average transmission of the TiO2 films deposited on the glass substrates was higher than 95% over the range of 400 to 800 nm.
... Show More
(8)
(5)
Studies on the flexural behavior of post-tensioned beams subjected to strand damage and strengthened with near-surface mounted (NSM) technique using carbon fiber-reinforced polymer (CFRP) are limited and fail to examine the effect of CFRP laminates on strand strain and strengthening efficiency systematically. Furthermore, a design approach for UPC structures in existing design guidelines for FRP strengthening techniques is lacking. Hence, the behavior of post-tensioned beams strengthened with NSM-CFRP laminates after partial strand damage is investigated in this study. The testing program consists of seven post-tensioned beams strengthened by NSM-CFRP laminates with three partial strand damage ratios (14.3% symmetrical damage, 14.3%
... Show More
(6)
(5)
A simple, fast and sensitive spectrophotometric method has been applied for the determination of tetracycline hydrochloride in its pure form and in pharmaceutical preparations. The method based on coupling reaction of the antibiotic with diazotized anthranilic acid to form a stable yellow azo dye which shows a maximum absorption at 419 nm. Uni- and multivariate approaches were followed in optimizing the experimental conditions. Under optimum experimental conditions obtained via multivariate (Central Composite Design), the linearity of the constructed calibration curve was in the range of 0.560 μg.mL-1 with molar absorptivity of 14619 L.mol-1.cm-1 and the value of detection limit was 0.2813μg.mL-1. The capability of the metho
... Show More
(1)