Twenty sand samples were collected from the sand dunes of Missan fields, Southeastern Iraq. Grain size distribution, mineralogical and chemical composition were studied for the total, medium, and fine-size sand fractions. The grain size analysis shows that the sand is the main component, followed by silt and trace of clay. The predominant grain size of sand is 0.250 to 0.500 mm, which forms more than 57.28 %, which indicates that these dunes were formed under the influence of relatively strong winds and the sedimentary material is close to the source. The light components are quartz, feldspar, and different rock fragments, while the heavy mineral assemblages are composed of opaque minerals, chlorite, mica, and amphiboles. Pyroxene and epidote are the common minerals, while zircon, garnet, tourmaline, rutile, kyanite, and staurolite are in minor amounts. X-ray diffraction (XRD) data reveals that the predominant non-clay minerals are quartz, calcite, feldspar, and gypsum. While the dominant clay minerals are palygorskite and illite, followed by kaolinite and the mixed layer of montmorillonite – chlorite. There is a negative relationship between the percentage of heavy minerals and the grain size of sand. Dunes are distinguished by a relatively high percentage of minerals derived from intermediate and basic igneous rocks located in the Zagros belt, northern Iraq. They also may be derived from local source formations, Injana and Mukdadiya in the surrounding areas. The average geochemical components of sand as indicated by X-ray fluorescence (XRF) are; SiO2 (61.36%), which is mainly represented by quartz, CaO (14.08%) related to the presence of carbonate, SO3 (0.05%) is represented by gypsum, Al2O3 (6.76 %) and alkalis (2.30%) reflect the presence of the K-feldspar and clay minerals, Fe2O3 (3.2%) is attributed to the presence of hematite, magnetite and limonite minerals. SiO2 is concentrated in a medium sand size fraction, while the other oxides are concentrated in a fine sand size fraction.
New polymer blend with enhanced properties was prepared from (80 %) epoxy resin (Ep), (20%) unsaturated polyester resin (UPE) as a matrix material. The as-obtained polymer blend was further reinforced by adding Sand particles of particle size (53 μm) with various weight fraction (5, 10, 15, 20 %). Thermal conductivity and sorption measurements are performed in order to determine diffusion coefficient in different chemical solutions (NaOH, HCl) with concentration (0.3N) after immersion for specific period of time (30 days). The obtained results demonstrate that the addition of sand powder to (80%EP/20%UPE) blend leads to an increase of thermal conductivity, with an optimum/minimum diffusion coefficient in (HCl)/(NaOH), respectively.
The effect of adding sand on clayey soil shear strength is investigated in this study. Five different percentage of clay-sand mixtures are used; 100% clay with 0% sand termed 100C, 60% clay with 40% sand termed 60C-40S, 30% clay with 70% sand termed 30C-70S, 15% clay with 85% sand termed 15C-85S, and as well as 100% sand termed 100S. The used clay was obtained from Baghdad city in Iraq and classified as CH soil, while the used sand was taken from Al-Khider area from Iraq and classified as SW soil. The initial dry unit weight for all mixtures is 16 kN/m3. The results show that the variations of the soil shear strength properties with soil components content changes
Sand production in unconsolidated reservoirs has become a cause of concern for production engineers. Issues with sand production include increased wellbore instability and surface subsidence, plugging of production liners, and potential damage to surface facilities. A field case in southeast Iraq was conducted to predict the critical drawdown pressures (CDDP) at which the well can produce without sanding. A stress and sanding onset models were developed for Zubair reservoir. The results show that sanding risk occurs when rock strength is less than 7,250 psi, and the ratio of shear modulus to the bulk compressibility is less than 0.8 1012 psi2. As the rock strength is increased, the sand free drawdown and depletion becomes larger. The CDDP
... Show MoreCoated sand (CS) filter media was investigated to remove phenol and 4-nitrophenol from aqueous solutions in batch experiments. Local sand was subjected to surface modification as impregnated with iron. The influence of process variables represented by solution pH value, contact time, initial concentration and adsorbent dosage on removal efficiency of phenol and 4-nitrophenol onto CS was studied. Batch studies were performed to evaluate the adsorption process, and it was found that the Langmuir isotherm effectively fits the experimental data for the adsorbates better than the Freundlich model with the CS highest adsorption capacity of 0.45 mg/g for 4-nitrophenol and 0.25 mg/g for phenol. The CS was found to adsorb 85% of 4-nitrophenol and
... Show MoreBackground: Syphilis disease remain as a problem especially in developing countries. it can be detected by serological tests and the infection may affected the immunoglobulins concentration and may cause spontaneous abortion.
L’Enfer est un roman de chambre par excellence. Tous les événements s'y sont presque déroulés. Le sujet de ce roman se résume: un jeune homme quitte la campagne pour vivre à Paris .Il loue une chambre dans un hôtel. Il tombe, par un pur hasard, sur une fente dans le mur de sa par laquelle chambre il peut voir tout ce qui se passe dans la chambre voisine .L'histoire racontée par ce narrateur, est la vie intime des couples venant dans cette chambre. Il médite sur sa propre condition à la lumière de ce qui se déroule dans la chambre voisine .C'est pour cette raison,que le roman se caractérise par une stabilité.Quoi qu’elle soit manifeste, le héros démontre une mobilité à son niveau psychique. Car il y a une évolution
... Show More