Numerical Investigation was done for steady state laminar mixed convection and thermally and hydrodynamic fully developed flow through horizontal rectangular duct including circular core with two cases of time periodic boundary condition, first case on the rectangular wall while keeping core wall constant and other on both the rectangular duct and core walls. The used governing equations are continuity momentum and energy equations. These equations are normalized and solved using the Vorticity-Stream function and the Body Fitted Coordinates (B.F.C.) methods. The Finite Difference approach with the Line Successive Over Relaxation (LSOR) method is used to obtain all the computational results the (B.F.C.) method is used to generate the grid of the problem. A computer program (Fortan 90) is built to calculate Nusselt Number (Nu) in steady state. The fluid Prandtl number is 0.7 Rayleigh Number 1<Ra<106, Reynolds number 1<Re<2000. For the range of parameters considered, results show that the time periodic boundary condition enhance heat transfer. It is also indicated in the results that heat transfer from the surface of the circle exceeds that of the rectangle duct. Comparisons with other research show good agreement.
Mixed convection in an Horizontal Rectangular Duct Including interior Circular Core with Time periodic Boundary Condition
mixed convection
radiation
rectangular duct
circular core
laminar flow
time periodic boundary condition
Publication Date
Mon Apr 01 2013
Journal Name
International Journal Of Electrical, Electronics And Telecommunication Engineering
Performance Analysis of xPON Network for
Different Queuing Models
—Passive optical network (PON)
Interleaved
Polling with Adaptive Cycle Time (IPACT)
Dynamic
Bandwidth Allocation (DBA)
Queuing models
Optical
line terminal (OLT)
Optical node user (ONU)
Passive optical network (PON) is a point to multipoint, bidirectional, high rate optical network for data communication. Different standards of PONs are being implemented, first of all PON was ATM PON (APON) which evolved in Broadband PON (BPON). The two major types are Ethernet PON (EPON) and Gigabit passive optical network (GPON). PON with these different standards is called xPON. To have an efficient performance for the last two standards of PON, some important issues will considered. In our work we will integrate a network with different queuing models such M/M/1 and M/M/m model. After analyzing IPACT as a DBA scheme for this integrated network, we modulate cycle time, traffic load, throughput, utilization and overall delay
... Show MorePublication Date
Sat Oct 01 2022
Journal Name
Environmental Advances
Stability and performance studies of emulsion liquid membrane on pesticides removal using mixture of Fe3O4Â nanoparticles and span80
The current study investigated the impact of nonionic surfactant span 80 in the existence of Fe3O4 magnetic nanoparticles on the emulsification of mixture of kerosene as petroleum based organic solvents and corn oil as a green diluent in the ratio 1:1
HCl was used as internal phase and the stability of the emulsion was carried out. The proposed Pickering emulsion liquid membrane has been exploited to investigate it is ability in the extraction of Abamectin pesticides from aqueous solution without utilizing carrier agent. Further
the effects of experimental parameters on extraction efficiency and emulsion stability such as
homogenizer speed
emulsification speed
contact time
Fe3O4-Span 80 ratios
HCL concentration
internal to membrane volume ratio (I/O) and pH of the external feed solution were carried out. The results showed that more than 99% of Abamectin could be extracted at 10 min contact time with a minimum breakage percent of 0.52% at the optimal conditions. The kinetic of the extraction were studied and the mass transfer coefficient was found to be for external phase () of 1.2
interfacial reaction rate constant () of 5.83 and the overall mass transfer coefficient () of 3.91 . The results of recyclability of the PELM revealed that the emulsion stability and extraction efficiency was nearly unchanged after three cycles.
(11)
(9)
Publication Date
Sat Sep 01 2018
Journal Name
Polyhedron
Novel dichloro (bis {2-[1-(4-methylphenyl)-1H-1, 2, 3-triazol-4-yl-κN3] pyridine-κN}) metal (II) coordination compounds of seven transition metals (Mn, Fe, Co, Ni, Cu, Zn and Cd)
The 1
3-dipolar cycloaddition “click” reaction between an azide and an alkyne to give a 1
2
3-triazole was reported by Huisgen in 1961 [1]. In 2002 the Copper(I)-catalyzed Azide-Alkyne Cycloaddition (CuAAC) to prepare a 1
2
3-triazole was reported [2]
[3]. The existence of relatively basic nitrogen atoms in the 1
2
3-triazole rings
and the possibility of introducing additional donor groups in the substituents (Fig. 1)
made the CuAAC “click” reaction an attractive method to prepare differently substituted 1
2
3-triazoles. These compounds have been used as ligands to coordinate to various metal ions that display a range of applications such as in electrochemical and photochemical studies
in supramolecular chemistry
magnetism
metal-ion sensing and catalysis [4]. The reasons for the success of the “click” reaction
is that it is easy to carry out and is widely applicable. It is not affected by a variety of functional groups
and can be carried out with a variety of Cu(I) catalysts and solvents
including aqueous conditions. The Cu(I) catalysts overcome the high activation energy barrier of the non-catalyzed Huisgen reaction by changing the mechanism of the reaction. A large variety of copper catalysts can be used for the CuAAC reaction
on condition that the maximum concentration of Cu(I) species is generated during the reaction. The pre-catalyst can be a Cu(II) salt (usually CuSO4) together with a reducing agent (often sodium ascorbate) or a Cu(I) compound in the presence of a base or amine ligand and a reducing agent to prevent oxidation to Cu(II). Some strong oxidising cupric salts or complexes such as Cu(OAc)2 also work. The solvent is very flexible from organic to aqueous
with the most commonly used combination water + an alcohol (t-BuOH
MeOH or EtOH). The key role of the solvent or solvent mixture is to solubilize the substrates and Cu(I) catalyst in order to ensure rapid reactions. Such aqueous conditions are very useful for biochemical conjugations
as well as for organic syntheses.
We recently reported on the synthesis of a series of differently substituted 1
2
3-triazole chromophores
the substituted 2-(1-phenyl-1H-1
2
3-triazol-4-yl)pyridine ligands [5]
see Fig. 2 middle
with substituents R = H (L1)
CH3 (L2)
OCH3 (L3)
COOH
F
Cl
CN
CF3
O(CH2)3CH3 and N(CH3)2. These versatile ligands were found to coordinate to various first row transition metals
such as manganese
cobalt and nickel [6]. Here we extend the series to include more first row transition metal(II) coordination compounds
iron
copper and zinc
as well as a second row transition metal(II) coordination compound
cadmium
containing the 2-(1-(4-methyl-phenyl)-1H-1
2
3-triazol-1-yl)pyridine chromophore (Fig. 2 right with R = CH3). This series of seven novel coordination compounds is the first series of pyridyl-triazole based transition metal coordination compounds where seven different transition metals are coordinated to the same 1
2
3-triazole chromophore
namely 2-(1-(4-methyl-phenyl)-1H-1
2
3-triazol-1-yl)pyridine.