A bolted–welded hybrid demountable shear connector for use in deconstructable steel–concrete composite buildings and bridges was proposed. The hybrid connector consisted of a partially threaded stud, which was welded on the flange of a steel section, and a machined steel tube with compatible geometry, which was bolted on the stud. Four standard pushout tests according to Eurocode 4 were carried out to assess the shear performance of the hybrid connector. The experimental results show that the initial stiffness, shear resistance, and slip capacity of the proposed connector were higher than those of traditional welded studs. The hybrid connector was a ductile connector, according to Eurocode 4, with slip capacity higher than 6 mm. A nonlinear finite-element model was calibrated against the pushout tests and found capable of reproducing the experimental behavior with good agreement. The verified finite-element model was then used to conduct a series of parametric studies in order to assess the effect of infilled grout, concrete slab strength, stud diameter, stud tensile strength, tube thickness, and tube tensile strength on the shear resistance and stiffness of the hybrid connector. Based on the experimental and numerical results, a design equation is proposed for the prediction of the shear resistance of the novel connector.
This research aims to design a high-speed laser diode driver and photodetector, the result is the
design of the high-speed laser diode driver with a short pulse of 10 ns at 30 KHz frequency and the
delivered maximum pulse voltage is 5.5 mV. Also, its optical output power of the laser diode driver is
about 2.529 mW for the centroied wavelength 1546.7 nm with FWHM of 286 pm and (1270-1610) nm.
The design of the circuit based on bipolar transistor where the input pulse signal is simply generated by
an arduino kit with 15 kHz frequency and then compensated to trigger to small signal amplifier which
was is simply NPN C3355 transistor and the output is a current driver to the laser diode. OptiSystem
software and Electronic
Globalization as phenomena has affected all aspects of life and reflected its impacts to the Arab world politically, economically, and culturally and became a vital field that related directly to our life. This field of searching needs as many studies and Academics as for employing the means that needed to face a national challenge which targeting the Arabic man Character in its ethics and values. This very important thing needs a very important reaction to face that challenge to protect the cultural ARABIC & ISLAMIC characteristics and to take care of education in all its levels and forms as it is an invincible fort. For that, this field has become as the priority of the studying and researches if the
... Show MoreA liquid-solid chromatography of Bovine Serum Albumin (BSA) on (diethylaminoethyl-cellulose) DEAE-cellulose adsorbent is worked experimentally, to study the effect of changing the influent concentration of (0.125, 0.25, 0.5, and 1 mg/ml) at constant volumetric flow rate Q=1ml/min. And the effect of changing the volumetric flow rate (1, 3, 5, and 10 ml/min) at constant influent concentration of Co=0.125mg/ml. By using a glass column of (1.5cm) I.D and (50cm) length, packed with adsorbent of DEAE-cellulose of height (7cm). The influent is introduced in to the column using peristaltic pump and the effluent concentration is investigated using UV-spectrophotometer at 30oC and 280nm wavelength. A spread (steeper) break-through curve is gained
... Show MoreThe research aims to identify the level of psychological pollution in Iraqi society and the significant differences in psychological pollution in the Iraqi society according to variables. A sample of (600) individuals randomly selected from all governorates of Iraq, with (285) males and (315) females was used in the current study. The researcher adopted the scale of (Muhammad, 2004) psychological pollution consisting of (118) items, which limited (46) items after modification distributed into four areas: denial and abuse of the civilized identity, attachment to foreign formal aspects, effeminacy, and anarchism. The results of the research showed that there is no statistical significance among the individuals of the research sample. They
... Show MorePostmodern arguments, formed a critic case of what modernity brought in several levels. Postmodern practice was considered as a proactive case having amorphous concepts and features to what entiled as an intellectual trends postmodern philosophically and intellectually. But, what postmodernism architecture broughts in it essence, was not isolation from the intellectual context and entrepreneurship case, and it was not disconnecting from the intellectual and philosophical era of that period. Lliteratures and philosophical argument precede what (Robert Venturi) and (Charles A Jencks) had brought, albeit it was closer to critics and correction the path of modernity from crystallizing a direction that exceeds modrinity to wh
... Show MoreMobile-based human emotion recognition is very challenging subject, most of the approaches suggested and built in this field utilized various contexts that can be derived from the external sensors and the smartphone, but these approaches suffer from different obstacles and challenges. The proposed system integrated human speech signal and heart rate, in one system, to leverage the accuracy of the human emotion recognition. The proposed system is designed to recognize four human emotions; angry, happy, sad and normal. In this system, the smartphone is used to record user speech and send it to a server. The smartwatch, fixed on user wrist, is used to measure user heart rate while the user is speaking and send it, via Bluetooth,
... Show MoreThis study deals with the aircraft wing analysis (numerical and experimental) which subjected to fatigue loading in order to analyze the aircraft wing numerically by using ANSYS 15.0 software and experimentally by using loading programs which effect on fatigue test specimens at laboratory to estimate life of used metal (aluminum alloy 7075-T651) the wing metal and compare between numerical and experimental work, as well as to formulate an experimental mathematical model which may find safe estimate for metals and most common alloys that are used to build aircraft wing at certain conditions. In experimental work, a (34) specimen of (aluminum alloy 7075-T651) were tested using alternating bending fatigue machine rig. The t
... Show More