This article presents a new cascaded extended state observer (CESO)-based sliding-mode control (SMC) for an underactuated flexible joint robot (FJR). The control of the FJR has many challenges, including coupling, underactuation, nonlinearity, uncertainties and external disturbances, and the noise amplification especially in the high-order systems. The proposed control integrates the CESO and SMC, in which the CESO estimates the states and disturbances, and the SMC provides the system robustness to the uncertainty and disturbance estimation errors. First, a dynamic model of the FJR is derived and converted from an underactuated form to a canonical form via the Olfati transformation and a flatness approach, which reduces the complexity of the controller design. Furthermore, by taking the advantage of available measurable states, the CESO is adopted to attenuate the noises and make SMC feasible for high-order systems. Moreover, the CESO estimates the disturbances, which relaxes the upper bound of the disturbance in the SMC and reduces the chattering due to smaller switching gains. A stability analysis of the closed-loop system is presented based on the Lyapunov method. The effectiveness of the proposed control is verified in simulations and experimentally on a real-time FJR system.
After the fall of the Soviet Union, a number of Eastern Bloc countries and Soviet republics have witnessed political transition. However, Turkmenistan, as one of the former Soviet republics, succeeded to preserve the authoritarian nature of the former Soviet regime. This study seeks to answer a number of research questions, the most prominent of which are: How were the political elite in Turkmenistan able to preserve the legacy of the Soviet policy based on centralization of power and individual rule?. The study reaches a set of conclusions, the most important of which are:
1-The roots of the tyranny in Turkmenistan are du to internal and external structural factors. The most important of which are: the former Soviet policies of m
... Show MoreIn this study, the response and behavior of machine foundations resting on dry and saturated sand was investigated experimentally. A physical model was manufactured to simulate steady state harmonic load at different operating frequencies. The effect of relative density, depth of embedment, foundation area as well as the imposed harmonic load was investigated. It was found that the amplitude of displacement of the foundation increases with increasing the amplitude of dynamic force and operating frequency meanwhile it decreases with increasing the relative density of sand, degree of saturation, depth of embedment and contact area of footing. The maximum displacement was noticed at 33.34 to 41.67 Hz. The maximum displacement amplitude respons
... Show MoreForty isolates of Bacillus spp. were isolated from fifty samples including different source of soil to detect the ability to produce keratinase enzyme in liquid state fermentation, Bacillus (Bs13)was the highest keratinase producer , it was identified as a strain of Bacillus licheniformis. The optimum conditions for keratinase productions were in a media contains keratin 4% (hooves) as a carbon and nitrogen and energy sources, peptone 1% as a secondary nitrogen source with pH 8 , inculums size 1%, and incubated at 37Co for 24 hrs.
By using governing differential equation and the Rayleigh-Ritz method of minimizing the total potential energy of a thermoelastic structural system of isotropic thermoelastic thin plates, thermal buckling equations were established for rectangular plate with different fixing edge conditions and with different aspect ratio. The strain energy stored in a plate element due to bending, mid-plane thermal force and thermal bending was obtained. Three types of thermal distribution have been considered these are: uniform temperature, linear distribution and non-linear thermal distribution across thickness. It is observed that the buckling strength enhanced considerably by additional clamping of edges. Also, the thermal buckling temperatures and
... Show MoreThe main objective of controlling companies Concentration is to prevent their potential anti-competitive effects on the competitive structure of the relevant market, in order to protect freedom of competition in it. In this context, it is necessary to verify that these operations do not impede effective competition or reduce it significantly by making it less than it was before, it is necessary to Anticipate all the effects In order to achieve the goal of controlling on it and revealing their potential restrictive effects. So there must be Auditing Norms that enable the authorities entrusted with the protection of competition and the prevention of monopolistic practices to evaluate these effects and determine their positive and negative as
... Show MoreThis article includes the preparation of luminescence materials from rare earth (Eu ) ion doping Yttrium Oxide (Y2O3) 70% and SiO2 25% and study the characteristics of phosphors for ultraviolet to visible conversion. The phosphor materials have been synthesized by two steps: Preparing the powder by solid state method using Y2O3, SiO2 and Eu2O3 with doping materials concentration (70%, 25% and 5%) respectively and different calcination temperature (1000, 1200 and 1400 oC).
The second step is to prepare the colloid solution by dispersing the produced powder in a polyvinyl alcohol solution (4%) .
Powde
... Show MoreAfrican countries are among the countries in the world that suffer from the phenomenon of child recruitment in wars and conflicts. There are many reasons behind it, including the nature of the human formation of children, the societal violence to which they are exposed, lack of access to education, economic hardships, as well as the role of African wars and conflicts and other reasons that compelled children to join armed groups and participate in military operations. The recruitment of children is divided into two types, compulsory and voluntary, and this leads to many humanitarian and security repercussions that are not limited to a specific period of time but extend to subsequent generations, and due to its seriousness, t
... Show MoreBackground and objectives: This study aimed at testing the effect of plastic sleeve or barrier, used to cover the guide of the light cure unit to prevent cross-infection, on the shear bond strength and site of bond failure of stainless steel and ceramic orthodontic brackets. Materials and methods: Forty orthodontic brackets; twenty stainless steel and twenty ceramic brackets bonded to forty extracted human maxillary first premolars using light cure adhesive cured with and without the use of a protective plastic barrier on the guide. Comparing the effect of this barrier on the shear bond strength and adhesive remnant index was performed using an independent t-test and Chi-square test. Results: The protective barrier had decreased the shear b
... Show MoreBackground: Leishmaniasis is important public
health problem owing to its impact on morbidity
and mortality and difficulties in application of
effective control measures.
Objective: The aim of the study is to evaluate the
using of impregnate bed nets in the control of
leishmaniasis.
Methods: The study was conducted throughout
the years 2004 and 2005, in Diala Governorate
(about 60km north-east Baghdad). This is the first
study in Iraq for evaluation of the impregnated bed
net in control of leishmaniasis. Two villages were
selected to achieve this aim. The nets were
distributed for the first village to be used by their
population. The second village was served as
control.
Results: The
... Show MoreThis study includes isolation, purification, and identification of algae from different aquatic environments in Baghdad city. Nine unialgal cultures were obtained. These algal cultures included 6 species of blue-green algae (Microcystis aeruginosa, Microcystis flos-aquae, Oscillatoria limnetica, Nostoc carneum, Westillopesis prolifica, Mastigocluds lamiosus), and 3 species of green algae (Mougeotia sclaris, Scenedesmus dimorphus and Chlorella vulgaris). In addition that aerial parts from Convolvulus arvensis were collected. Terpens, alkaloids and phenols were extracted of mentioned plant, and the antialgal activity of extracts types were evaluated in 3 concentrations (5, 10, and 20 mg/ml) by wells and diffused in the agar media. Results
... Show More