This work characterizes the fractographic features of the neat epoxy and ZrO2 epoxy nanocomposites. All samples were subjected to a tensile test to determine the tensile strength and tensile modulus. SEM images were used to study the morphology of the fractured surface. The fractographic of the fracture surfaces were studied by microstructure analysis program (j-images) to specify the effect of ZrO2 nanoparticles on tensile performance and failure mechanism for ZrO2 epoxy nanocomposites. The tensile test results show that the addition of ZrO2 nanoparticles (2, 4, 6, 8, and 10 vol.%) to the epoxy matrix leads to increase the tensile strength about 40% for optimal content of ZrO2 nanoparticles at 4 vol.%, tensile modules of ZrO2 epoxy nanocomposites increased about 200% for optimal content of ZrO2 nanoparticles at 4 vol.%. SEM images show that the patterns of fractured surfaces of ZrO2 epoxy nanocomposites are different from the pattern of the neat epoxy. The fracture roughness of ZrO2 epoxy nanocomposites increased with the increases of the percentages of ZrO2 nanoparticles, where the increment of fracture roughness about 30% for optimal content of ZrO2 nanoparticles at 4 vol.% can be indicator for the improvement of mechanical properties (tensile strength and modules).
A new Schiff base o-hydroxybenzylidene-1-phenyl-2,3-dimethyl-4-amino-3-pyrazolin-5-on (HL) ,have been prepared and characterization.(HL) has been used as a chelating ligand to prepare a number of metal complexes VO(II) ,Cr(III) ,Mn(II),Fe(II),Hg(II) and UO2(II) .and mixed ligands complexes have been prepared between o-hydroxybenzylidene-1-phenyl-2,3-dimethyl-4-amino-3-pyrazolin-5-on and 8- hydroxy quinoline with VO(II),Zn(II),Cd(II), Hg(II) and UO2(II) the prepared complexes were isolated and characterized by (FT-IR)and (UV-Vis) spectroscopy. Elemental analysis (C.H.N) Chloride contents, Flame atomic absorption technique. in addition to magnetic susceptibility and conductivity measurement. Molar ratio measurement in solution gave comparabl
... Show MoreObjective: The aim of this study was to compare the marginal microleakage between bulk-fill, preheated bulk-fill, and bulk-fill flowable composite resins above and below cemento-enamel junction (CEJ) using micro-computed tomography. Methods: Sixty freshly extracted premolar teeth were prepared with a slot shaped cavities of a total of 120 Class II: 3mm (bucco-lingual), 2mm (mesio-distal) with mesial-gingival margin located 1mm coronal to CEJ, and distal gingival margin located 1mm apical to the CEJ. The samples were randomly divided into two main groups according to the restorative material (Tetric EvoCeram and 3M Filtek), and each group was further sub-divided into three subgroups according to the consistency (bulk fill, preheated bulk fil
... Show MoreBackground: With the increasing demands for adult orthodontics, a growing need arises to bond attachments to porcelain surfaces. Optimal adhesion to porcelain surface should allow orthodontic treatment without bond failure but not jeopardize porcelain integrity after debonding.The present study was carried out to compare the shear bond strength of metal bracket bonded to porcelain surface prepared by two mechanical treatments and by using different etching systems (Hydrofluoric acid 9% and acidulated phosphate fluoride 1.23%). Materials and Methods: The samples were comprised of 60 models (28mm *15mm*28mm) of metal fused to porcelain (feldspathic porcelain). They were divided as the following: group I (control): the porcelain surface left u
... Show MoreAn experimental study was performed to estimate the forced convection heat transfer performance and the pressure drop of a single layer graphene (GNPs) based DI-water nanofluid in a circular tube under a laminar flow and a uniform heat flux boundary conditions. The viscosity and thermal conductivity of nanofluid at weight concentrations of (0.1 to 1 wt%) were measured. The effects of the velocity of flow, heat flux and nanoparticle weight concentrations on the enhancement of the heat transfer are examined. The Nusselt number of the GNPs nanofluid was enhanced as the heat flux and the velocity of flow rate increased, and the maximum Nusselt number ratio (Nu nanofluid/ Nu base fluid) and thermal performance factor
... Show Moreليست الادارة المحلية أو نظام الحكم المحلي ابتكاراُ حديثاً للانسان، بل أنه لازم البشرية منذ أقدم العصور وحتى الآن، إذ الملاجظ أن القرى الصغيرة نشأت قبل أن تنشئ الدولة أو قيل أن يتبلور مفهوم الدولة في الوقت الحاضر وكانت القرى والمدن تجتمع بين حين وأخر- اجتماع أفرادها- لادارة شؤونهم وحل مشاكلهم، وكان هذا خير دليل لتطبيق مفهوم الديمقراطية المباشرة بين أفراد المجتمع الواحد، ولذلك فإن الحك
... Show Moreاِنطلقت فِكرة إعداد هذه الدِّراسة بعد الاِطِّلاع على محاضر مجلس الأُمَّة التركي الكبير، ومعرِفة التشريعات التي تناولت مفاصل الحياة الاِجتماعيَّة في تُـركيا، وبيَّنت هذه التشريعات التي نظَّمت مُستوى العلاقة بين المواطن والدولة، وأسهمت في وضع حلول مُـشكِلاتٍ اِجتماعيَّة عديدة منها؛ ما له صِلة بإجراءات الدولة في رفع المظلوميَّة عن المواطنين الأتراك والمقيمون فيها، مع تشخص بعض الظواهر الاِجتماعيَّة السِّـ
... Show Moreيهدف هذا البحث الى تحديد اثر الاختلاف في ادراكات العاملين للعدالة التنظيمية في المنظمات قيد البحث. وقد تم اعتماد الادراك كمتغير تفسيري، اما العدالة التنظيمية فمثلت المتغير الاستجابي بانواعها الثلاث (العدالة التوزيعية، العدالة الاجرائية، والعدالة التفاعلية)، ولتحقيق اهداف البحث فقد تم اختيار دائرة صحة بغداد/ الكرخ مجتمع للدراسة. وجرى تصميم استبانة ووفق مقياس خماسيي الدراجات وجرى تحليل البيانات باستخ
... Show MoreTransportation problems are considered as a type of operation research problems. In fact, they deal with scheduling transportation of goods from their source to delivery sites in the minimum cost.
Such problems can be solved by the available traditional methods, which include; North-West corner, Least cost and Vogel’s method. As well as if this transportation problem is considered as a linear program it can also be solved by using Simplex method
The goal of the present study is to compare different research methods to provide the optimal and minimum cost.
This study was applied to resolve a transportation problem related to land Transportation Company, w
... Show MoreBackground: The association between facial types and dental arches forms has considerable implications in orthodontic diagnosis and treatment planning. The aim was to establish the maxillary and mandibular dental arches width and length in skeletal and dental class II division 1 and class III malocclusion groups, find out the most frequent dental arch form and facial type and the association between them and to check the gender differences. Materials and Methods: Frontal and lateral facial photographs and maxillary and mandibular occlussal photographs for 90 iraqi subjects with age 18-25 years old (45 males and 45 females) divided equally into three groups, the 1st group with class II division 1malocclusion (overjet more than 3mm but less t
... Show More