The pure ZnS and ZnS-Gr nanocomposite have been prepared
successfully by a novel method using chemical co-precipitation. Also
conductive polymer PPy nanotubes and ZnS-PPy nanocomposite
have been synthesized successfully by chemical route. The effect of
graphene on the characterization of ZnS has been investigated. X-ray
diffraction (XRD) study confirmed the formation of cubic and
hexagonal structure of ZnS-Gr. Dc-conductivity proves that ZnS and
ZnS-Gr have semiconductor behavior. The SEM proved that
formation of PPy nanotubes and the Gr nanosheet. The sensing
properties of ZnS-PPy/ZnS-Gr for NO2 gas was investigated as a
function of operating temperature and time under optimal condition.
The sensitivity,

The poly(ethylene oxide) polymer (PEO) is doped with fine powder of MnCl₂ salt and thin films of thickness (50–150 mm) with salt content (0, 5, 10, 15, and 20 wt%) are obtained. The AC electrical conductivity and dielectric constants are studied as a function of temperature through an impedance technique. It is found that AC conductivity increases and the calculated activation energy decreases with increasing temperature due to enhancement of the ionic conduction in the film bulk. The dielectric constants of the doped membranes increase with temperature. It is found that the peak value of the tanloss is shifted to a higher frequency at higher temperatures. The dielectric behavior is explained on the basis of

The effect of considering the third dimension in mass concrete members on its cracking behavior is investigated in this study. The investigation includes thermal and structural analyses of mass concrete structures. From thermal analysis, the actual temperature distribution throughout the mass concrete body was obtained due to the generation of heat as a result of cement hydration in addition to the ambient circumstances. This was performed via solving the differential equations of heat conduction and convection using the finite element method. The finite element method was also implemented in the structural analysis adopting the concept of initial strain problem. Drying shrinkage volume changes were calculated using the procedure suggested

This paper deals with load-deflection behavior the jointed plain concrete pavement system using steel dowel bars as a mechanism to transmit load across the expansion joints. Experimentally, four models of the jointed plain concrete pavement system were made, each model consists of two slabs of plain concrete that connected together across expansion by two dowel bars and the concrete slab were supported by the subgrade soil. Two variables were dealt with, the first is diameter of dowel bar (12, 16 and 20 mm) and the second is type of the subgrade soil, two types of soil were used which classified according to the (AASHTO): Type I (A-6) and type II (A-7-6). Experimental results showed that increasing dowel bar diameter from 12 mm to 20 mm

This research is concerned to investigate the behavior of reinforced concrete (RC) deep beams strengthened with carbon fiber reinforced polymer (CFRP) strips. The experimental part of this research is carried out by testing seven RC deep beams having the same dimensions and steel reinforcement which have been divided into two groups according to the strengthening schemes. Group one was consisted of three deep beams strengthened with vertical U-wrapped CFRP strips. While, Group two was consisted of three deep beams strengthened with inclined CFRP strips oriented by 45^o with the longitudinal axis of the beam. The remaining beam is kept unstrengthening as a reference beam. For each group, the variable considered

In this paper, three types of epoxy-based coatings (Polyamide, pure Polyamine, and Polyamine reinforced by glass-flake) used as a lining for potable water tanks were studied using experimental and finite element methods. Tensile, impact, and fatigue tests were conducted on uncoated and coated AISI 316 stainless steel. The test results show that the applied epoxy based coating improves the mechanical properties, increases of fatigue crack resistance, and enhance the dynamic fracture toughness. The fatigue crack propagation is influenced by the compositions of epoxy coating, and the glass-flake improves the coating resistance to fatigue crack propagation compared to other types.

شغلت نظرية العدل الإلهي بال الأديب العراقي القديم، مما جعلته يثير عبر نصوصه الأدبية كثير من التساؤلات حول عدالة الإلهة، التي يعبدها ويقدم لها الهدايا وتساؤلاته هذه دفعت بالباحث إلى اختيارها عنوانا لموضوعه، إلا أن الدراسة ستختصر على نصوص معينة، والسبب في ذلك أنها كانت الرائدة في هذا الجانب، وفي اللحظة التي ينتقي فيها العدل الإلهي وتتحول الإلهة إلى كلاب تلهث وراء غرائزها، ذهبنا وراء الأسباب التي قادت إلى فقد

إن المعتقدات الخاصة بالسحر والعرافة قديمة جدا كون الإنسان عرف الكثير منها ومارس أنواع من الأساليب السحرية منذ أقدم العصور ومن أكثر العلوم التي حرم تعليمها ونشرها هو علم السحر والسيمياء أو الكيمياء والشعبذة والحيل . ومع ذلك عرف السحر من قبل سكان بلاد وادي الرافدين ولاسيما في بابل والسحر يمثل أقدم مرحلة في تطور العقل البشري .

The process of doing many kinds of industries , crafts , professions around Islamic Arabian State , they enable us to say that Arab Muslims over their homelands had been occupied various types of crafts and manufacturing before emergence Islam . Moreover Islam encouraged to work within manufacture field . And These matters were clarified through verses of the Holy Qur’an and honored prophetic guidance ( Sunna  )  . Whereas Arab Muslims applied principle “ Free of Business “  . They admitted to different social groups such as pact – fellows people  to profession or craft which they desire to work . We have to not forget that Arab Muslims had broken all restraints and shackles which had restricted the worker bef

The study aims to diagnose the levels of total costs borne by the Diyala State Company, then estimate and analyze the quantitative relationship between the different items of these costs, in addition to the impact of the productive activity on them. This was done by choosing the different variables affecting the costs and their different items for the company under study, and relying on the data issued by the company during the period (2002-2021), based on a methodology that combines the descriptive and econometric methods in order to estimate and analyze the cost function in the concerned company. According to the estimated function of the costs of the company under study, the study concluded that the value of production affects the total