The present study involves experimental analysis of the modified Closed Wet Cooling Tower (CWCT) based on first and second law of thermodynamics, to gain a deeper knowledge in this important field of engineering in Iraq. For this purpose, a prototype of CWCT optimized by added packing under a heat exchanger was designed, manufactured and tested for cooling capacity of 9 kW. Experiments are conducted to explore the effects of various operational and conformational parameters on the towers thermal performance. In the test section, spray water temperature and both dry bulb temperature and relative humidity of air measured at intermediate points of the heat exchanger and packing. Exergy of water and air were calculated by applying the exergy destruction method on the cooling tower. Experimental results showed a significant performance improvement when using packing on the CWCT. It can be observed that the thermal efficiency for the CWCT with packing under a heat exchanger and CWCT with packing above the heat exchanger are approximately 40% and 25% higher than that of the CWCT without packing respectively. As another part of the experiment results, it is indicated that the exergy destruction is directly proportional to air flow rate, cooling water flow rate, inlet cooling water flow rate and inlet Air Wet Bulb Temperature (AWBT) whereas, it is inversely proportional with spray water flow rate. In comparison with the cooling capacity of the tower, it was found that the exergy destruction approximately less than 20%. Exergy efficiency behavior is inversely proportional with the behavior of the exergy destruction. Empirical correlations are obtained to predict water film heat transfer coefficient and air-water mass transfer coefficient considering the influences of operational parameters.
ءأرﻘﻟا ةﺎﯾﺣﺑ ًﺎﻘﯾﺛو ًﻻﺎﺻﺗا لﺻﺗﺗ. نﻣ ﮫﺑﺗﺎﮐﻟﻟ ﻲﺻﺧﺷﻟا ﻊﺑﺎطﻟا ﻲﻔﺣﺻﻟا دوﻣﻌﻟا لﻣﺣﯾ ا فﻟﺗﺧﻣﻟ ﮫﻟوﺎﻧﺗ لﻼﺧ وا ﮫﺋارا وا هرظﻧ ﺔﮭﺟو لﻣﺣﺗ ﻲﺗﻟا ﺔﯾﻣوﯾﻟا ثادﺣﻻاو ﺎﯾﺎﺿﻘﻟ ﺢﺿﻔﺑ موﻘﯾو ثادﺣﻻاو ﺔﯾﺑﻟﺳﻟا رھاوظﻟﻟ ىدﺻﺗﯾ وا، ءيرﺎﻘﻟا ﯽﻟا ﮫﺑرﺎﺟﺗ وا هرﺎﮐﻓا ءﺎطﺧﻻا دﺻرﯾ بﯾﻗرﺑ ﮫﺑﺷا وھو، ءيرﺟﻟا دﻘﻧﻟا نﻋ مﻧﯾ بوﻟﺳﺎﺑ ﺔﺋطﺎﺧﻟا تﺎﺳرﺎﻣﻣﻟا ﺎﮭﺣدﻣﯾو تﺎﯾﺑﺎﺟﯾﻻا ﯽﻟﻋ
... Show More
The Berber tribes in the Islamic Maghreb and Andalusia had a distinct role in the future of states and entities .The Islamic Maghreb in terms of its stability,downfall,political relations and conflicts among them.Among these tribes was the Banu Yafran tribe, which is the subject of the study.
The Berber tribes in the Islamic Maghreb and Andalusia had a distinct role in the future of states and entities .The Islamic Maghreb in terms of its stability,downfall,political relations and conflicts among them.Among these tribes was the Banu Yafran tribe, which is the subject of the study.
In this study, SnS thin films were deposited onto glass substrate by thermal evaporation technique at 300K temperature. The SnS films have been prepared with different thicknesses (100,200 &300) nm. The crystallographic analysis, film thickness, electrical conductivity, carrier concentration, and carrier mobility were characterized. Measurements showed that depending on film thickness. The D.C. conductivity increased with increase in film thickness from 3.720x10-5 (Ω.cm)-1 for 100 nm thickness to 9.442x10-4 (Ω.cm)-1 for 300 nm thicknesses, and the behavior of activation energies, hall mobility, and carrier concentration were also studied.
Heat transfer around a flat plate fin integrated with piezoelectric actuator used as oscillated fin in laminar flow has been studied experimentally utilizing thermal image camera. This study is performed
for fixed and oscillated single and triple fins. Different substrate-fin models have been tested, using fins of (35mm and 50mm) height, two sets of triple fins of (3mm and 6mm) spacing and three frequencies
applied to piezoelectric actuator (5, 30 and 50HZ). All tests are carried out for (0.5 m/s and 3m/s) in subsonic open type wind tunnel to evaluate temperature distribution, local and average Nusselt number (Nu) along the fin. It is observed, that the heat transfer enhancement with oscillation is significant compared to without o
Density Functional Theory (DFT) calculations were carried out to study the thermal cracking for acenaphthylene molecule to estimate the bond energies for breaking C8b-C5a , C5a-C5 , C5-C4 , and C5-H5 bonds as well as the activation energies. It was found that for C8b-C5a , C5-C4 , and C5-H5 reactions it is often possible to identify one pathway for bond breakage through the singlet or triplet states. The atomic charges , dipole moment and nuclear – nuclear repulsion energy supported the breakage bond .Also, it was found that the activation energy value for C5-H5 bond breakage is lower than that required for C8b-C5a , C5a-C5 , C5-C4 bonds which refer to C5-H5 bond in acenaphthylene molecule are weaker than C8b-C5a , C5a-C5 , C5-C
... Show More
Aim of the research is the study of improving the performance of the thermal station south Baghdad and the main reasons for reduced its efficiency. South Baghdad power planet comprises (6) steam turbine units and (18) gas turbine units .The gas turbine units are composed of two groups: the first group is made up of gas units (1,2), each of capacity (123) MW. The design efficiency of gas turbine units is 32%. The actual efficiency data of steam units is 18.3% instead of 45% which is the design efficiency. The main reason for efficiency reduction of gas units is the rejected thermal energy with the exhaust gases to atmosphere, that are (450-510) ℃.The bad type of fuel used (heavy) fuel. Another reason for the low efficiency and has a neg
... Show MoreSolar collectors, in general, are utilized to convert the solar energy into heat energy, where it is employed to generate electricity. The non-concentrating solar collector with a circular shape was adopted in the present study. Ambient air is heated under a translucent roof where buoyant air is drawn from outside periphery towards the collector center (tower base). The present study is aimed to predict and visualize the thermal-hydrodynamic behavior for airflow under inclined roof of the solar air collector, SAC. Three-dimensional of the SAC model using the re-normalization group, RNG, k−ε turbulence viscus model is simulated. The simulation was carried out by using ANSYS-FLUENT 14.5. The simulation
... Show More
(4)