The use of nanofluids in combination with magnetic fields has a wide range of applications in many fields, including cooling systems, microelectromechanical systems, medical systems, solar collectors, heat exchangers, and lubrication technologies. The magnetohydrodynamic (MHD) free convection in an inclined porous cylinder field with nanofluid was simulated numerically in this study. The heat was generated uniformly through the cylinder, and the horizontal walls were thermally insulated while the lateral wall remained at constant cold temperature. Vorticity transport and energy equations were used as the governing equations. A MATLAB code was developed to solve these equations after transforming them into algebraic equations using the finite difference approach. In this article, the range of the governing parameters considered were Rayleigh number 100≤Ra≤10000 and MHD parameter 0≤Mn≤2, inclination angle 0°≤λ≤90°, while the geometry aspect ratio was A=1 and nanoparticle volume fraction of Al2O3 was 2%. The strength of circulation decreased significantly as the MHD parameter rose. Increasing the MHD parameter led to decrease in velocity, stream function, and local and mean Nusselt numbers, while the temperature increased. Whereas Nusselt number decreased by 45.6% when MHD parameter increased from 0 to 2. The inclination angle had a positive effect up to λ = 45º where the Nusselt number enhanced by 26% when inclination angle increased from 0º to 45º at Ra = 10000 in the absence of MHD. Increasing the Rayleigh number caused a reduction in the temperature and an increase in stream function values and mean Nusselt number, and for a high Rayleigh number, the warm region was adjacent to the upper wall. Nusselt number enhanced with increase in Ra where it increased by 667% when Ra increased from 100 to 10000 at λ = 45º in the absence of MHD.
Abstract: The aim of this study is to assess the effectiveness of 940 nm diode laser in comparison to Endoactivator in elimination of smear layer in terms of radicular dentin permeability and ultra-structural changes of root canal walls by SEM evaluation. Twenty-eight single-rooted extracted lower premolars were instrumented up to size X4 (protaper Next, Dentsaply) and divided into two experimental groups according to the irrigation system, G1; activated by EndoActivator and G2; activated by Diode laser 940 nm, CW mode, 1.7 W. Afterward, the roots were made externally impermeable, filled with 2%methylene blue dye, divided horizontally into three segments representing the apical, middle, and coronal thirds then examined under stereo- micr
... Show MoreBuilding natural period, T, is a key character in building response for wind and seismic induced forces. In design practice, the period, T, is either estimated from empirical relations proposed by the design codes or determined from analytical or numerical models. The effect of the soil-structure interaction is usually neglected in the design practice and analysis models. This paper uses a sophisticated finite element simulation to investigate the effect of soil-structure modeling on the fundamental period of RC buildings subjected to wind and seismic induced forces. A typical interior building frame has been imitated using the frame element for beams and columns with constrains to mo
Many faces are exposed to degradation, discoloration, changes in humidity. The primary objective has improved some properties of hybrid nanocomposites materials that used for restoring of the function maxillofacial prosthesis and improving the esthetic. In the present research different lengths chopped and continuous of ultrahigh molecular weight polyethylene (UHMWPE) fiber was added at selected percentage (0.0, 0.2% and 1%) to polymer blend composite (95%SR /5%PMMA: 0.2% Pomegranate Peels Powder (PPP)) for developing the properties of silicone rubber used for the maxillofacial prosthesis applications. Some mechanical and physical properties were done on the all prepared samples. The results showed that all properties have improved when add
... Show MoreThe research deals with the principle of the prohibition of international waterway diversion in the law of international watercourses. The research reviews individual and collective doctrinal efforts that have touched upon the principle as an internationally wrongful act because of its serious damage and consequences for downstream States. The research addresses the nature of the principle of the prohibition of diversion of international watercourses; its various effects; principles of international law establishing the principle of prohibition of diversion; and its application in State practice and international justice. This principle has been enshrined in most international treaties and judicial decisions. The principle of prohibition
... Show MoreThis research included measuring the concentrations of natural radioactive isotopes U-238 and Th-232 and radiation dose rates for selected areas of Missan province, GR-460 system was used which has the potential to measure the concentrations of natural radioactive isotopes in (ppm) unit and measuring the radiation dose rates in μR/h unit. It was also used with the system the mobile device FH-40 which measures the radiation dose rates in units μSμ/h the measurement results showed the absence of a significant increase in the U-238 and Th-232 concentration where the concentration of isotopes of U-238 and natural Th-232 (3.35-5.46) ppm respectively it is authorized and universally accepted. In terms of radiation dose rates it ranged betwe
... Show MoreIn this study, hexadecyltrimethylammonium bromide (HDMAB) - bentonite was synthesized by placing alkylammonium cation onto bentonite. Adsorption of textile dye such as direct Yellow 50 on natural bentonite and HDMAB -bentonite was investigated. The effects of pH, contact time,dosage clay and temperature were investigated experimentally .The Langmuir and Freundlish isotherms equations were applied to the data and values of parameters of these isotherm equations were evaluated. The study indicated that using 0.2 g of HDMAB (hexadecyltrimethylammonium bromide) lead to increase the percentage removal(R%) from 78% for pure bentonite to 99 %. The optimum pH value for the adsorption experiments was found to be pH=3 and therefore all the experim
... Show More