Mauddud Formation (Albian stage-the Early Cretaceous) is an important oil reservoir in Ratawi field of southern Iraq. Four wells, R T-2, R T-3, R T-6, and R T-7, located 70 km northwest of Basra, were selected to study microfacies properties and petrophysical associations with the probability of oil production. Seventy-seven core samples are collected, and thin sections for petrographic analysis. The self-potential, Gamma-ray, resistivity, and porosity logs are used to determine the top and bottom of the Mauddud Formation. Water saturation of the invaded and uninvaded zones, shale volume, and porosity were calculated. The study area results showed that the quantity of shale is less than 15% for most of the wells, and the dominant porosity is the secondary porosity. In contrast, the primary porosity is low in all study wells, and the formation contains varying proportions of producing hydrocarbons. The results suggest the formation comprises light-colored dolomitized lime and pseudo-oolitic white limestone with green to blue-gray shale. The petrographic analyses of 65 thin sections of the Mauddud Formation reveal that most skeletal grains are shallow marine-derived faunas, while non-skeletal grains include peloids and ooids. The facies analysis showed that the Mauddud Formation was deposited within different sedimentary environments ranging from deep to very shallow environments, which was represented by a large variation in Five microfacies and ten submicrofacies, the microfacies "Mudstone, wackestone, packstone, grainstone, and Rudstone "submicrofacies" Peloidal wackestone to packstone, Bioclastic wackestone to packstone, Miliolids wackestone to packstone,Orbitolina wackestone, Peloidal packstone to grainstone, Orbitolina packstone, Mudstone to wackestone,Bioclastic wackestone, Miliolids and Bioclastic wackestone to packstone, Bioclastic packstone, and Peloidai grainstone". This variance suggested that the formation might be deposited within the carbonate platform's variety of environment, such as "deep sea, restricted, shallow open marine, mid-ramp, rudist biostrome, and shoal." Seven different kinds of pores have been found in the carbonate sideman of the Formation: Interparticle, Intraparticle, moldic, Vuggy and fracture.
In this study, sulfur was removed from imitation oil using oxidative desulfurization process. Silicoaluminophosphate (SAPO-11) was prepared using the hydrothermal method with a concentration of carbon nanotubes (CNT) of 0% and 7.5% at 190 °C crystallization temperature. The final molar composition of the as-prepared SAPO-11 was Al2O3: 0.93P2O5: 0.414SiO2. 4% MO/SAPO-11 was prepared using impregnation methods. The produced SAPO-11 was described using X-ray diffraction (XRD) and Brunauer-Emmet-Teller (N2 adsorption–desorption isotherms). It was found that the addition of CNT increased the crystallinity of SAPO-11. The results showed that the surface area of SAPO-11 containing 7.5% CNT was 179.54 m2/g, and the pore volume was 0.31
... Show MoreAbstract A description study was carried through out the present study aimed to assess health education provided by nurses to patient with gall stone "obstructive jaundice". The study was conducted at 4 teaching hospital, Baghdad teaching hospital, Al-Karama teaching hospital, Al-Yarmook teaching hospital, Al-Kendy teaching hospital where choloecystectomy was performed, in the period from first of June 2004 to end of July 2004. Data were collected through the use of questionnaire an interview from which was developed for the purpose of the present study. A non-probability (purposive) sample which was consist
AA3003-H14 aluminum alloy plates were welded by friction stir welding and TIG welding.
Fatigue properties of the welded joints were evaluated based on the superior tensile properties for
FSW at 1500 rpm rotational speed and 80 mm/min welding speed. However, there is not much
information available on effect of welding parameters with evolution of fatigue life of friction stir
welds. The present study experimentally analyzed fatigue properties for base, FSW, and TIG welds
of AA 3003-H14 aluminum alloy. Fatigue properties of FSW joints were slightly lower than the
base metal and higher than TIG welding.
The goal of our study is to perform detailed multiband surface photometry of the spiral galaxy NGC 4448 and its brightest star-forming regions. The structure and composition of the stellar population in the surface brightness galaxy NGC 4448 was studied using BVR CCD photometry. The observations were obtained on the 1.88 m optical telescope of Kottamia Astronomical Observatory (KAO), Egypt. A two-dimensional decomposition of the galaxy bulge and disk components is carried out. A powerful star forming region is observed near the galactic center. Based on the positions of the various components of the galaxy in two color diagrams. From the observations, the surface brightness profiles, Ellipticity profiles, position angle profiles and colo
... Show More