Preferred Language
Articles
/
OxZKE4cBVTCNdQwCPTQI
Wellbore Trajectory Optimization Using Rate of Penetration and Wellbore Stability Analysis
...Show More Authors

Drilling deviated wells is a frequently used approach in the oil and gas industry to increase the productivity of wells in reservoirs with a small thickness. Drilling these wells has been a challenge due to the low rate of penetration (ROP) and severe wellbore instability issues. The objective of this research is to reach a better drilling performance by reducing drilling time and increasing wellbore stability.

In this work, the first step was to develop a model that predicts the ROP for deviated wells by applying Artificial Neural Networks (ANNs). In the modeling, azimuth (AZI) and inclination (INC) of the wellbore trajectory, controllable drilling parameters, unconfined compressive strength (UCS), formation pore pressure, and in-situ stresses of the studied area were included as inputs. The second step was by optimizing the process using a genetic algorithm (GA), as a class of optimizing methods for complex functions, to obtain the maximum ROP along with the related wellbore trajectory (AZI and INC). Finally, the suggested azimuth (AZI) and inclination (INC) are premeditated by considering the results of wellbore stability analysis using wireline logging measurements, core and drilling data from the offset wells.

The results showed that the optimized wellbore trajectory based on wellbore stability analysis was compatible with the results of the genetic algorithm (GA) that used to reach higher ROP. The recommended orientation that leads to maximum ROP and maintains the stability of drilling deviated wells (i.e., inclination ranged between 40°—50°) is parallel to (140°—150°) direction. The present study emphasizes that the proposed methodology can be applied as a cost-effective tool to optimize the wellbore trajectory and to calculate approximately the drilling time for future highly deviated wells.

Crossref
View Publication
Publication Date
Thu May 25 2017
Journal Name
Ibn Al-haitham Journal For Pure And Applied Sciences
Purification, Characterization and Antifungal Activity of Chitinase from Serratia marcescens Isolated from Fresh Vegetables
...Show More Authors

  Seven [35%] and five [25%] Serratia marcescens  isolates were obtained out of 20 samples of lettuce and 20 samples of spinach, respectively, taken from different locations in a farm in Baghdad city. The isolate that produced chitinase in higher level was chosen to purify chitinase through several stages of purification including: ammonium sulfate precipitation, DEAE- sephadex ion exchange chromatograpgy and sephadex G-200 gel filtration with 89.5- fold purification and 30% recovery.       The purified chitinase was characterized and the molecular weight of enzyme was 59000 daltons by using gel filtration chromatography. The optimum pH and temperature of the purified chitinase were 6.0 and 50°

... Show More
View Publication Preview PDF
Publication Date
Sat Jun 15 2019
Journal Name
Ibn Al-haitham Journal For Pure And Applied Sciences
Synthesis and Antibacterial Activity of Some Novel Schiff S-Bases Compounds Containing Oxadiazole Ring
...Show More Authors


Condensation of 4-methoxybenzoyl hydrazine with 4- aminobenzoic acid in the presence of POCl3 gave the oxadiazole derivative [III] .This compound was demethylated with aluminium chloride to give series of 2- (4-hydroxy phenyl)-5-(4-amino phenyl)
1,3,4-oxadiazole [IV]. Series of Schiff s bases [V]n were synthesized by the condensation of compound [IV] with 4-n-alkoxy benzaldehyde in the presence of glacial acetic acid. Condensation of compounds [VI]n.  with adipoyl chloride in dry pyridine leads to the formation of a new homologous series [VI]n. The structures of the synthesized compounds were confirmed by physical and spectral means The new compounds [VI]n have been screened for their antibacterial activities . The results

... Show More
View Publication Preview PDF
Publication Date
Mon Feb 01 2021
Journal Name
Indonesian Journal Of Electrical Engineering And Computer Science
Comparative study of logistic regression and artificial neural networks on predicting breast cancer cytology
...Show More Authors

<p>Currently, breast cancer is one of the most common cancers and a main reason of women death worldwide particularly in<strong> </strong>developing countries such as Iraq. our work aims to predict the type of tumor whether benign or malignant through models that were built using logistic regression and neural networks and we hope it will help doctors in detecting the type of breast tumor. Four models were set using binary logistic regression and two different types of artificial neural networks namely multilayer perceptron MLP and radial basis function RBF. Evaluation of validated and trained models was done using several performance metrics like accuracy, sensitivity, specificity, and AUC (area under receiver ope

... Show More
View Publication
Scopus (3)
Crossref (1)
Scopus Crossref
Publication Date
Tue Oct 16 2018
Journal Name
International Journal Of Pharmaceutical Quality Assurance
Isolation and Detection of Candida tropicalis from Aborted Placenta in Al-Najaf city/Iraq
...Show More Authors

Background: Candida tropicalis is one of the most causes of vulvovaginal candidiasis (VVC) in women. Systemic candidiasis and candidemia may also occur in pregnancies. Objective: This study was carried out to detect and isolate of this yeast from aborted placenta, which may cause severe complications such as spontaneous abortion. Materials and methods: Fresh aborted placenta were collected and washed by normal saline to remove the blood. Then, cut it into portions and place it in test tube containing 5 ml of normal saline. Finally, shake for 10 minutes, after that, cultured for microbial isolation. Isolation and detection were done by some conventional methods with Api candida and CHROMagar. Results: The results showed that four iso

... Show More
View Publication Preview PDF
Scopus (1)
Crossref (1)
Scopus Crossref
Publication Date
Fri Mar 01 2019
Journal Name
Iraqi Journal Of Physics
The effect of rear earth doping CdS nanostructure on structural, optical and photoconductivity properties
...Show More Authors

Rare earth elements (Cerium, Lanthanum and Neodymium) doped CdS thin films are prepared using the chemical Spray Pyrolysis Method with temperature 200 oC. The X-ray diffraction (XRD) analysis refers that pure CdS and CdS:Ce, CdS:La and CdS:Nd thin films showed the hexagonal crystalline phase. The crystallite size determined by the Debye-Scherrer equation and the range was (35.8– 23.76 nm), and it was confirmed by field emission scanning electron microscopy (FE-SEM). The pure and doped CdS shows a direct band gap (2.57 to 2.72 eV), which was obtained by transmittance. The room-temperature photoluminescence of pure and doped CdS shows large peak at 431 nm, and two small peaks at (530 and 610 nm). The Current – voltage measurement in da

... Show More
View Publication Preview PDF
Crossref (1)
Crossref
Publication Date
Tue Jan 29 2019
Journal Name
Journal Of The College Of Education For Women
The political image of Kurds and ideological representation in the Arab novel in Iraq
...Show More Authors

The novels that we have addressed in the research, Including those with the ideological and political ideology, It's carry a negative image for the Kurds without any attempt to understand, empathy and the separation between politics and the people, The novels were deformation of the image, Like tongue of the former authority which speaks their ideas, Such as (Freedom heads bagged, Happy sorrows Tuesdays for Jassim Alrassif, and Under the dogs skies for Salah Salah). The rest of novels (Life is a moment for Salam Ibrahim, The country night for Jassim Halawi, The rib for Hameed Aleqabi). These are novels contained a scene carries a negative image among many other social images, some positive, and can be described as neutral novels. We can

... Show More
View Publication Preview PDF
Publication Date
Wed Dec 14 2016
Journal Name
Journal Of Baghdad College Of Dentistry
Physical and Histological Evaluation of Coated Implant with Nano ZrO2 after Creation Titania Nanotubes
...Show More Authors

Background: Contact between implant material and bones must be strong and fast creation, to fulfill these properties appropriate surface modifications must apply on used implants. In this contribution; double surface modifications are applied on Ti-6Al-4V alloy to accelerate osseointegration. Materials and methods: Anodic process is utilized to create titania nanotubes (TNTs) on the screws made from Ti-6Al-4V alloy. These implants were coated with nano ZrO2 particles. Second modification was annealing anodized screws at 8000C, and implanted in tibiae of nine adult New Zealand white rabbits. Results: Physical and histological consequences of two surface modifications on Ti-6Al-4V alloy screws were studied. Scanning electron microscope (SEM)

... Show More
View Publication Preview PDF
Crossref (1)
Crossref
Publication Date
Sun Mar 25 2018
Journal Name
Biomedical And Pharmacology Journal
Comparing the Impact Strength and Transverse Flexure Strength of Three Different Dentures Base Materials
...Show More Authors

View Publication
Crossref (6)
Crossref
Publication Date
Mon Dec 01 2014
Journal Name
Photonic Sensors
Crystalline Structure and Surface Morphology of Tin Oxide Films Grown by DC Reactive Sputtering
...Show More Authors

Abstract: Tin oxide thin films were deposited by direct current (DC) reactive sputtering at gas pressures of 0.015 mbar – 0.15 mbar. The crystalline structure and surface morphology of the prepared SnO2 films were introduced by X-ray diffraction (XRD) and atomic force microscopy (AFM). These films showed preferred orientation in the (110) plane. Due to AFM micrographs, the grain size increased non-uniformly as the working gas pressure increased.

Preview PDF
Publication Date
Sun Aug 11 2024
Journal Name
Lecture Notes In Networks And Systems
International Financial Reporting Standards and Their Impact on the Value of the Economic Unit
...Show More Authors

This study examines the impact of adopting International Financial Reporting Standards (IFRS) on the value of economic units. Given the global push toward standardization of financial reporting to enhance financial statement transparency, comparability, and reliability, this research seeks to understand the implications of these standards for economic valuation within a region characterized by its unique economic and regulatory challenges. A questionnaire was distributed to 86 Iraqi academics specializing in economics, accounting, and finance to collect their views on the impact of adopting international financial reporting standards. Through careful statistical analysis, the study concluded that applying international financial reporting s

... Show More
View Publication
Scopus Crossref