Preferred Language
Articles
/
IRfdTI8BVTCNdQwC9mpn
Sedimentological characterization of the mid-Cretaceous Mishrif reservoir in southern Mesopotamian Basin, Iraq
...Show More Authors
ABSTRACT<p>The CenomanianÐEarly Turonian reservoirs of the Mishrif Formation of the Mesopotamian Basin hold more than one-third of the proven Iraqi oil reserves. Difficulty in predicting the presence of these mostly rudistic reservoir units is mainly due to the complex paleogeography of the Mishrif depositional basin, which has not been helped by numerous previous studies using differing facies schemes over local areas. Here we present a regional microfacies-based study that incorporates earlier data into a comprehensive facies model. This shows that extensive accumulation of rudist banks usually occurred along an exterior shelf margin of the basin along an axis that runs from Hamrin to Badra and southeast of that, with additional interior rudist margins around an intra-shelf basin to the southwest. Regional tectonism defined the accommodation sites during the platform development.</p><p>Facies analysis allowed the recognition of 21 microfacies types and their transgressive-regressive cyclic stacking pattern. Sequence-stratigraphic analysis led to the recognition of three complete third-order sequences within the studied Mishrif succession. Eustatic sea-level changes were the primary control on this sequence development but local tectonics was important at the Cenomanian/Turonian boundary. Rudist biostromes are stacked as thicker shallowing-up cycles composed of several smaller-scale cycles. In places, smaller cycles are clearly shingled (stacked laterally). Iraq’s Mishrif sequences are thus analogous to coeval systems across the Arabian Plate in Oman, United Arab Emirates, offshore Saudi Arabia and Kuwait, southwest Iran and the Levant.</p><p>Analysis of poroperm trends shows porosity increasing beneath sequence boundaries due to karstification and meteoric dissolution. The presence of interconnected vugs in grain-dominated fabric make the rudist biostromes the best reservoir units. Dissolution of aragonitic components of rudist shells was the most important diagenetic process that enhanced reservoir characteristics. The presence of rudist-bearing facies with their diagenetic overprint within regressive cycles is considered the primary factor in effective porosity development and distribution. As a result, because of depositional heterogeneities (facies type distribution and their 3-D geometries) and the influence of sequence boundaries on reservoir quality, each field shows unique geometrical combinations of pay zones, barriers and seals.</p>
Scopus Crossref
View Publication
Publication Date
Sun Sep 02 2012
Journal Name
Baghdad Science Journal
Aquatic Oligochaetes of Iraq's Southern Marshes
...Show More Authors

Aquatic Oligochaetes community in the Iraqi southern marshes, Al- Hawiezah, Al-Chibayish and Al-Hammar, have been studied for the period from July 2006 to June 2007. Two sites within each marsh, in addition to a reference site located at Shatt Al-Garma, have been chosen for sample collection using Ekman dredge. The results revealed that the highest average annual density was 16800 individual / m2 recorded in Al-Hawiezah marsh, while in Al-Chibayish and al-Hammar marsh the density did not exceed 5111 individual/m2. In contrast, the density of Oligochaetes recorded in Shatt Al-Garma was about 10500 individual / m2. The highest monthly density was recorded in April 2007.The highest local percentage occurrence was 96% recorded in Al-Hawiezah ma

... Show More
View Publication Preview PDF
Crossref (1)
Crossref
Publication Date
Tue Dec 24 2024
Journal Name
Modern Sport
The reality of technological leadership in youth and sports directorates in the southern region from the point of view of employees
...Show More Authors

View Publication
Publication Date
Tue Feb 28 2023
Journal Name
Iraqi Geological Journal
Estimation of Petrophysical Properties for Zubair Reservoir in Abu-Amood Oil Field
...Show More Authors

The petrophysical analysis is significant to determine the parameters controlling the production wells and the reservoir quality. In this study, Using Interactive petrophysics software to analyze the petrophysical parameters of five wells penetrated the Zubair reservoir in the Abu-Amood field to evaluate a reservoir and search for hydrocarbon zones. The available logs data such as density, sonic, gamma ray, SP, neutron, and resistivity logs for wells AAm-1, AAm-2, AAm-3, AAm-4, and AAm-5 were used to determine the reservoir properties in Zubair reservoir. The density-neutron and neutron-sonic cross plots, which appear as lines with porosity scale ticks, are used to distinguish between the three main lithologies of sandstone, limesto

... Show More
View Publication Preview PDF
Crossref
Publication Date
Sat Feb 27 2021
Journal Name
Iraqi Journal Of Science
The Use of Seismic Reflection Data Inversion Technique to Evaluate the Petro- Physical Properties of Nahr Umr Formation at Kumait and Dujaila Oil Fields – Southern Iraq
...Show More Authors

The estimation of rock petrophysical parameters is an essential matter to characterize any reservoir. This research deals with the evaluation of  effective porosity (Pe), shale volume (Vsh) and water saturation (Sw) of reservoirs at Kumait and Dujalia fields, which were analyzed from well log and seismic data. The absolute acoustic impedance (AI) and relative acoustic impedance (RAI) were derived from a model which is based on the inversion of seismic 3-D post-stack data. NahrUmr formation’s sand reservoirs are identified by the RAI section of the study area. Nahr Umr sand-2 unit in Kumait field is the main reservoir; its delineation depends on the available well logs and AI sections information. The results of well logging i

... Show More
View Publication Preview PDF
Scopus (3)
Scopus Crossref
Publication Date
Tue Mar 30 2021
Journal Name
Baghdad Science Journal
Characterization of the Groundwater within Regional Aquifers and Suitability Assessment for Various Uses and Purposes-Western Iraq
...Show More Authors

Groundwater quality investigation has been carried out in the western part of Iraq (west longitude '40°40). The physicochemical analyses of 64 groundwater samples collected from seven aquifers were used in the determination of groundwater characterization and assessment. The concept of spatial hydrochemical bi-model was prepared for quantitative and qualitative interpretation. Hydrogeochemical data referred that the groundwater is of meteoric origin and has processes responsible for observed brackishness. The geochemical facies of the groundwater reveal that none of the anions and cations pairs exceed 50% and there are practically mixtures of multi-water types (such as Ca–Mg–Cl–HCO3 and Na+K–SO4–Cl water type) as do

... Show More
View Publication Preview PDF
Scopus (7)
Crossref (5)
Scopus Clarivate Crossref
Publication Date
Sun Apr 12 2009
Journal Name
Journal Of Engineering
Correlations of Reservoir Rock Properties from Well Measurements
...Show More Authors

Publication Date
Wed Sep 09 2009
Journal Name
University Of Baghdad
Estimation of Reservoir Rock Properties from Well Measurements
...Show More Authors

Porosity and permeability are the most difficult properties to determine in subsurface reservoir characterization. The difficulty of estimating them arising from the fact that porosity and permeability may vary significantly over the reservoir volume, and can only be sampled at well location. Secondly, the porosity values are commonly evaluated from the well log data, which are usually available from most wells in the reservoir, but permeability values, which are generally determined from core analysis, are not usually available. The aim of this study is: First, to develop correlations between the core and the well log data which can be used to estimate permeability in uncored wells, these correlations enable to estimate reservoir permeabil

... Show More
Preview PDF
Publication Date
Wed Jul 01 2020
Journal Name
Journal Of Engineering
Permeability Determination of Tertiary Reservoir/Ajeel Oil Field
...Show More Authors

This paper discusses the method for determining the permeability values of Tertiary Reservoir in Ajeel field (Jeribe, dhiban, Euphrates) units and this study is very important to determine the permeability values that it is needed to detect the economic value of oil in Tertiary Formation. This study based on core data from nine wells and log data from twelve wells. The wells are AJ-1, AJ-4, AJ-6, AJ-7, AJ-10, AJ-12, AJ-13, AJ-14, AJ-15, AJ-22, AJ-25, and AJ-54, but we have chosen three wells (AJ4, AJ6, and AJ10) to study in this paper. Three methods are used for this work and this study indicates that one of the best way of obtaining permeability is the Neural network method because the values of permeability obtained be

... Show More
View Publication Preview PDF
Crossref
Publication Date
Wed Oct 31 2018
Journal Name
Iraqi Journal Of Science
Petrophysical properties of the reservoir unit (1C) for Upper Shale Member from Zubair formation in Luhais field
...Show More Authors

The research dealt with the reservoir division for Upper Shale Member from Zubair formation in Luhais field, Where it was divided into six units of reservoir and non-reservoir, including the main reservoir unit 1C, which is the subject of research in this study, and studied in terms of thickness and lithology.                                                                       

&

... Show More
View Publication Preview PDF
Publication Date
Sun Mar 13 2011
Journal Name
Baghdad Science Journal
Phytoplankton primary production in southern Iraqi marshes after restoration
...Show More Authors

Primary productivity and chlorophyll-a were used in this study to monitor the restoration process of southern Iraqi marshes (Al-Hewaizeh, central marshes, and Al-Hammar). The phytoplankton primary productivity was based on oxygen light/dark bottle method. Two different depths samples were taken monthly from six studied marshes stations (two stations for each marsh) during November 2005 to October 2006, while chlorophyll-a samples taken from surface water. The phytoplankton primary productivity values ranged 9.38 – 249.79 mg C/m3.hr for all marshes, its values for surface water sample ranged 11.71 – 256.24 mg C/m3.hr, while for 1m depth ranged 9.38 – 142.5 mg C/m3.hr. Chlorophyll-a values ranged between (1.1 – 21.26) µg/l indicating

... Show More
View Publication Preview PDF
Crossref (1)
Crossref