This study has three parts, the first one is the synthesis of a novel Schiff bases by the condensation of guanine or 9-[{2-hydroxyethoxy}methyl]-9H-guanine with variety aldehydes to yield four different bases as follows: (E)-2-((4-nitrobenzylidene)amino)-1,9-dihydro-6H-purin-6-one (S1), (E)-2-((4-methoxybenzylidene)amino)-1,9-dihydro-6H-purin-6-one (S2), (E)-2-((2-hydroxybenzylidene) amino)-9-((2-hydroxy ethoxy)methyl)-1,9-dihydro-6H-purin-6-one (S3), and (E)-2-(((9-((2-hydroxy ethoxy)methyl)-6-oxo-6,9-dihydro-1H-purin-2-yl)imino)methyl)benzoic acid (S4). Then, spectroscopic analyses such as Elemental Analysis, UV/VIS, Mass spectra, FTIR, 1H,13C-NMR were made to recognize these bases. In the second part, the ability of synthesized bases to undergo a charge transfer reaction was examined in an ethanolic solution at 28℃ with Iodine (I2) and 2,3-Dichloro-5,6-dicyano-1,4-benzoquinone (DDQ) acceptors. The nonbonding interactions were studied using Benesi–Hildebrand method to estimate the stability parameters for all formed charge transfer complexes. The results of CT-energies and Gibbs free energies (ΔG˚) confirmed the stability of these complexes, and all complexes follow the Benesi–Hildebrand equation. The results showed that the DDQ-complexes have an affinity constant ranging from (916.6–24,400) mol−1.L higher than the affinity constant of I2-complexes which ranges from (428.5–7000) mol−1.L. Moreover, the KCT of S2 > S1 and KCT of S4 > S3 were as follows [1222.2 for S1-I2, 4333.3 for S1-DDQ, 2812.5 for S2-I2, 4800 for S2-DDQ] and [3809.5 for S3-I2, 12,200 for S3-DDQ, 7000 for S4-I2, 24,400 for S4-DDQ] due to the specific properties of each compound. The direct energy gap (Egdir) of each complex was also obtained by applying Tauc's method. Iodine complexes with S1, S2, S3, S4, as well as S1-DDQ displayed energy gaps equal to (5.14, 5.11, 4.61, 4.51, and 3.90) eV, respectively, and are likely to act as insulators. In contrast, the DDQ complexes of (S2/S3/S4) bases exhibited Egdir values at (2.85–2.24) electron volts which makes them suitable for semiconductor material usage. Finally, the third part of this work included a theoretical study using DFT/B3LYP/3-21G method to illustrate and prove the experimental findings, which were consistent with the theoretical results.
Elastic electron scattering form factors, charge density distributions and charge,neutron and matter root mean square (rms) radii for P24PMg, P28PSi and P32PS nuclei arestudied using the effect of occupation numbers. Single-particle radial wave functionsof harmonic-oscillators (HO) potential are used. In general, the results of elasticcharge form factors showed good agreement with experimental data. The occupationnumbers are taken to reproduce the quantities mentioned above. The inclusion ofoccupation numbers enhances the form factors to become closer to the data. For thecalculated charge density distributions, the results show good agreement withexperimental data except the fail to produce the hump in the central region for P28PSinucleus.
... Show MoreAutorías: Muhammad Hamza Shihab, Nuha Mohsin Dhahi. Localización: Revista iberoamericana de psicología del ejercicio y el deporte. Nº. 4, 2022. Artículo de Revista en Dialnet.
Traditional tree management is laborious and costly, thus this work aimed to study the performance of two different types of frond cutting saws (reciprocating saw and vibrating saw) and examine the two saws on five date palm varieties. Four parameters were examined, including cutting time for a single frond, the power needed for cutting a single frond, frond cutting productivity expressed as tree/h, and vibration conveyed to the worker’s hand. A field experiment was designed according to the nested randomized complete block design, including five date palm varieties as the main plot and the type of saw as a sub-plot. Means were compared using the least significant differences (LSD 0
A numerical method is developed for calculation of the wake geometry and aerodynamic forces on two-dimensional airfoil under going an arbitrary unsteady motion in an inviscid incompressible flow (panel method). The method is applied to sudden change in airfoil incidence angle and airfoil oscillations at high reduced frequency. The effect of non-linear wake on the unsteady aerodynamic properties and oscillatory amplitude on wake rollup and aerodynamic forces has been studied. The results of the present method shows good accuracy as compared with flat plate and for unsteady motion with heaving and pitching oscillation the present method also shows good trend with the experimental results taken from published data. The method shows good result
... Show MoreThis work represents implementation and investigation of optical coherent communication system between two computers. A single mode optical fiber is selected as transmission medium. The data are sent via the RS-232 standard interface with a bit rate of 9.6 kbps from personal computer (PC1) by line receive to convert the data from electrical levels (-12/+12 V) into TTL level (0/5 V). The modulation of this data was accomplished by internal modulation using laser diode type (HFCT-5208M) 1310 nm wavelength. The optical D-coupler was used to combine the optical signal that come from laser source with optical signal of laser local oscillator (OTS-304XI) at 1310/1550 nm wavelength to obtain coherent (homodyne and heterodyne) detection respective
... Show MoreA theoretical and experimental investigation was carried out to study the behavior of a two-phase closed thermosyphon loop (TPCTL) during steady-state operation using different working fluids. Three working fluids were investigated, i.e., distilled water, methanol, and ethanol. The TPCTL was constructed from an evaporator, condenser, and two pipelines (riser and downcomer). The driving force is the difference in pressure between the evaporator and condenser sections and the fluid returns to the heating section by gravity. In this study, the significant parameters used in the experiments were filling ratios (FR%) of 50%, 75%, and 100% and heat-input range at the evaporator section of 215-860.2 W. When the loop reached to
... Show MoreThe present work evaluated the differences in mechanical properties of two athletic prosthetic feet samples when subjected to impact while running. Two feet samples designated as design A and B were manufactured using layers of different orientations of woven glass fiber reinforced with unsaturated polyester resin as bonding epoxy. The samples’ layers were fabricated with hand lay-up method. A theoretical study was carried out to calculate the mechanical properties of the composite material used in feet manufacturing, then experimental load-deflection test was applied at 0 degree position and 25 degree dorsiflexion feet position and impact test were applied for both feet designs to observe the behavior
... Show MoreAbstract:-
The phenomenon of financial and administrative corruption is not the result today, but not tied to time or designated place, he is the scourge is rampant in all countries of the world, without exception, those developed and developing, a phenomenon that crossed national boundaries and become withstand a global character, and corruption is limited to communities of particular economic systems without the other, but suffered Throughout history most societies to varying degrees, Iraq is one of the countries that suffered and continues to suffer from corruption, which has become, B grumble in most of the Iraqi state institutions, especially after the occupation in 2003 as administrative corruption in Iraq arrived i
... Show MoreFH Ghanim, Journal of Global Pharma Technology, 2018