The purpose of this study is to examine the opinions of students who study at Balıkesir University Faculty of Sports Sciences against violence and misconduct in sport and to determine their level of interest in sporty events. Students studying at Balıkesir University Faculty of Sport Sciences participated in the research in the 2020-2021 academic year. A total of 385 students, 50.4% (n=194) male and 49.6% (n=191) female, participated in the research. A questionnaire developed by Şeker (2011) was used to determine the views of the students participating in the research on violence and undesirable behaviors in sports. The obtained data were analyzed with (SPSS) 26.0 for Windows and presented in tables. Personal information variables (age, gender, etc.), frequency and standard deviation, arithmetic mean and chi-square analyzes were used in the analysis of the data. The level of significance in the analyzes was set as 0.05. As a result of this study; It was found that the majority of male and female students studying at Balıkesir University Faculty of Sports Sciences did not approve of violent acts and undesirable behaviors in sports. It can be said that male students have a higher tendency towards violence and unwanted behaviors in sports than female students
Spor Bilimleri Fakültesi öğrencilerinin sporda şiddet ve istenmeyen davranışlara ilişkin görüşlerinin incelenmesi (Balıkesir Üniversitesi örneği)
Sport
violence
undesirable behaviors in sports
Publication Date
Mon Apr 06 2020
Journal Name
August
INFLUENCE OF SOME FACTOR ON SOMATIC EMBRYOS INDUCTION
AND GERMINATION OF DATE PALM CV BARHI BY USING CELL
SUSPENSION CULTURE TECHNIQUE
This study was done to examine different concentrations of mercuric chloride (Hgcl2) for Explants sterilization and different
concentration of NAA) mg/L with 2iP for their effect on initiation primary callus and subsequent embryogenesis in Phoenix
dactyliferae cultivar Barhi. Leaf primordial and shoot tips were excised from 2-3 years old offshoot. The result showed that
contamination percentage decreased with an increase in concentration of Hgcl2 for two explants where in the control (0.0)%
gave highest value 75% and 62.5% of contamination for leaf primordial and shoot tip respectively while the addition (0.1)%
gave a significant decrease 37.5 and 0% for explants respectively. The Explants were inoculated onto Murashiege and Skoog
1962 (MS) medium supplemented with 2iP 3mg/L and containing 0
25
50 or 100 mg/L of NAA
the addition (50) mg/L of NAA
gave highest value 68.8% in percentage of callus initiation with significant difference from addition 0% gave lowest value
(18.8)%
as well Explants of shoot tip gave significant difference was 53.1% while leaf primordial gave 28.1%
Primary callus
was transferred to fresh MS medium containing (0
5
10 and 20) mg/L of NAA with 3mg/L 2iP
Results were recorded after 12
weeks. A highest value of embryonic callus induction percentage or fresh weight and dry weight 87.5% or 1.56g and 0.47g for
the character respectively for the treat 20 mg/L while control treatment 0.0 gave the lowest value 12.5% or 0.37g and 0.14g for
same character respectively. Inoculated 1g fresh biomass into a 250 ml Erlenmeyer flask containing 50 ml MS liquid medium
supplemented with NAA 20mg/L and agitated at 150 rpm by shaker to making suspension culture the measurements of
packed cell volume ( pcv) or fresh and dry weight taken weekly for 12 weeks
maximum values were reached in the eighth week
of PCV and fresh weight but the dry weight reached to highest value in seventh week
then the curve began to decline
gradually until it reached stability in the last two weeks. The cell suspension was Diluted to different initial cell density of 100
500
10000
50000 and 100000 cells /ml with hemocytometer. The initial cell number of (10000) cells gave significant different
of plating efficiency PE (11.6)% while (100) cells gave lowest value 1.8% of PE.
Publication Date
Sun Feb 02 2020
Journal Name
University Of Baghdad, College Of Education For Pure Sciences / Ibn Al-haitham, Department Of Mathematics
Some Types of Perfect Mappings
j-perfect mappings
j-ω-perfect mappings
-ω-perfect mappings
weakly -ω-perfect mappings
strongly-ω-perfect mappings
nm- j-ω-converges to a subset
nm- j-ω-directed toward a set
nm- j-ω-closed mappings
nm- j-ω-rigid set
nm- j-ω-continuous mappings
nm- j-ω-perfect mappings in bitopological.
The aims of this thesis are to study the topological space; we introduce a new kind of perfect mappings, namely j-perfect mappings and j-ω-perfect mappings. Furthermore, we devoted to study the relationship between j-perfect mappings and j-ω-perfect mappings. Finally, certain theorems and characterization concerning these concepts are studied. On the other hand, we studied weakly/ strongly forms of ω-perfect mappings, namely -ω-perfect mappings, weakly -ω-perfect mappings and strongly-ω-perfect mappings; also, we investigate their fundamental properties. We devoted to study the relationship between weakly -ω-perfect mappings and strongly -ω-perfect mappings. As well as, some new generalizations of some definitions wh
... Show MorePublication Date
Sat Sep 01 2018
Journal Name
Polyhedron
Novel dichloro (bis {2-[1-(4-methylphenyl)-1H-1, 2, 3-triazol-4-yl-κN3] pyridine-κN}) metal (II) coordination compounds of seven transition metals (Mn, Fe, Co, Ni, Cu, Zn and Cd)
The 1
3-dipolar cycloaddition “click” reaction between an azide and an alkyne to give a 1
2
3-triazole was reported by Huisgen in 1961 [1]. In 2002 the Copper(I)-catalyzed Azide-Alkyne Cycloaddition (CuAAC) to prepare a 1
2
3-triazole was reported [2]
[3]. The existence of relatively basic nitrogen atoms in the 1
2
3-triazole rings
and the possibility of introducing additional donor groups in the substituents (Fig. 1)
made the CuAAC “click” reaction an attractive method to prepare differently substituted 1
2
3-triazoles. These compounds have been used as ligands to coordinate to various metal ions that display a range of applications such as in electrochemical and photochemical studies
in supramolecular chemistry
magnetism
metal-ion sensing and catalysis [4]. The reasons for the success of the “click” reaction
is that it is easy to carry out and is widely applicable. It is not affected by a variety of functional groups
and can be carried out with a variety of Cu(I) catalysts and solvents
including aqueous conditions. The Cu(I) catalysts overcome the high activation energy barrier of the non-catalyzed Huisgen reaction by changing the mechanism of the reaction. A large variety of copper catalysts can be used for the CuAAC reaction
on condition that the maximum concentration of Cu(I) species is generated during the reaction. The pre-catalyst can be a Cu(II) salt (usually CuSO4) together with a reducing agent (often sodium ascorbate) or a Cu(I) compound in the presence of a base or amine ligand and a reducing agent to prevent oxidation to Cu(II). Some strong oxidising cupric salts or complexes such as Cu(OAc)2 also work. The solvent is very flexible from organic to aqueous
with the most commonly used combination water + an alcohol (t-BuOH
MeOH or EtOH). The key role of the solvent or solvent mixture is to solubilize the substrates and Cu(I) catalyst in order to ensure rapid reactions. Such aqueous conditions are very useful for biochemical conjugations
as well as for organic syntheses.
We recently reported on the synthesis of a series of differently substituted 1
2
3-triazole chromophores
the substituted 2-(1-phenyl-1H-1
2
3-triazol-4-yl)pyridine ligands [5]
see Fig. 2 middle
with substituents R = H (L1)
CH3 (L2)
OCH3 (L3)
COOH
F
Cl
CN
CF3
O(CH2)3CH3 and N(CH3)2. These versatile ligands were found to coordinate to various first row transition metals
such as manganese
cobalt and nickel [6]. Here we extend the series to include more first row transition metal(II) coordination compounds
iron
copper and zinc
as well as a second row transition metal(II) coordination compound
cadmium
containing the 2-(1-(4-methyl-phenyl)-1H-1
2
3-triazol-1-yl)pyridine chromophore (Fig. 2 right with R = CH3). This series of seven novel coordination compounds is the first series of pyridyl-triazole based transition metal coordination compounds where seven different transition metals are coordinated to the same 1
2
3-triazole chromophore
namely 2-(1-(4-methyl-phenyl)-1H-1
2
3-triazol-1-yl)pyridine.
Publication Date
Sun Oct 17 2021
Journal Name
Iraqi Journal Of Physics
The effect of inorganic pigment on the tensile properties of polycarbonate irradiated with UV – light
The effect of UV-light on the tensile properties of pure PC has been studied. It was shown that irradiation of PC undergo a drop in the tensile properties of 30 hour of exposure. The results of irradiated samples shows that the addition of ZnO and TiO2 with different percentages (0.5
1
1.5 %) will reduce the Young modulus and ultimate stress of PC/ZnO
PC/ TiO2 composites
The effect of UV-light on the tensile properties of pure PC has been studied. It was shown that irradiation of PC undergo a drop in the tensile properties of 30 hour of exposure. The results of irradiated samples shows that the addition of ZnO and TiO2 with different percentages (0.5, 1, 1.5 %) will reduce the Young modulus and ultimate stress of PC/ZnO ,PC/ TiO2 composites
Publication Date
Sat Oct 01 2022
Journal Name
Environmental Advances
Stability and performance studies of emulsion liquid membrane on pesticides removal using mixture of Fe3O4Â nanoparticles and span80
The current study investigated the impact of nonionic surfactant span 80 in the existence of Fe3O4 magnetic nanoparticles on the emulsification of mixture of kerosene as petroleum based organic solvents and corn oil as a green diluent in the ratio 1:1
HCl was used as internal phase and the stability of the emulsion was carried out. The proposed Pickering emulsion liquid membrane has been exploited to investigate it is ability in the extraction of Abamectin pesticides from aqueous solution without utilizing carrier agent. Further
the effects of experimental parameters on extraction efficiency and emulsion stability such as
homogenizer speed
emulsification speed
contact time
Fe3O4-Span 80 ratios
HCL concentration
internal to membrane volume ratio (I/O) and pH of the external feed solution were carried out. The results showed that more than 99% of Abamectin could be extracted at 10 min contact time with a minimum breakage percent of 0.52% at the optimal conditions. The kinetic of the extraction were studied and the mass transfer coefficient was found to be for external phase () of 1.2
interfacial reaction rate constant () of 5.83 and the overall mass transfer coefficient () of 3.91 . The results of recyclability of the PELM revealed that the emulsion stability and extraction efficiency was nearly unchanged after three cycles.
(15)
(12)
Publication Date
Sat Dec 01 2012
Journal Name
Advances In Bioresearch
Cytotoxicity of Miltefosine against Leishmania majorPromastigotes
Leishmaniasis has poor vaccination trials and the available drugs have side effects on patients. Therefore
development ofnew chemicals is important for public health. Miltefosine is the first drug used for oral treatment of visceral leishmaniasis.Previous studies approved that miltefosine is an effective treatment against visceral leishmaniasis
the visceral form ofLeishmania
and also on L. major
the cutaneous form of Leishmania. Here
we investigated the in vitro cytotoxicity ofmiltefosine on the procyclic promastigotes forms of L. major. Different concentrations of miltefosine were investigatedagainst the flagellated form of L. major
and results showed that miltefosine has inhibited the in vitro proliferation of theparasite
approving the cytotoxic effect of the compound on Leishmania
EC50 was determined after 24 hours exposure forthe drug and it was 1.54 μM. Our findings indicate that miltefosine has a cytotoxic effect on the insect stage of the old worldL. major and can be a new anti-Leishmanial drug
Publication Date
Sun Sep 04 2011
Journal Name
Baghdad Science Journal
Pulse Profile Rule in Laser Heating of Opaque Targets in Air
A theoretical model is developed to determine time evolution of temperature at the surface of an opaque target placed in air for cases characterized by the formation of laser supported absorption waves (LSAW) plasmas. The model takes into account the power temporal variation throughout an incident laser pulse
(i.e. pulse shape
or simply: pulse profile). Three proposed profiles are employed and results are compared with the square pulse approximation of a constant power.
A theoretical model is developed to determine time evolution of temperature at the surface of an opaque target placed in air for cases characterized by the formation of laser supported absorption waves (LSAW) plasmas. The model takes into account the power temporal variation throughout an incident laser pulse, (i.e. pulse shape, or simply: pulse profile).
Three proposed profiles are employed and results are compared with the square pulse approximation of a constant power.
Publication Date
Wed Dec 01 2021
Journal Name
Structures
The effect of ground motion characteristics on the fragility analysis of reinforced concrete frame buildings in Australia
The seismic performance of buildings can be assessed through fragility analysis as it yields the probability of the demand exceeding the capacity at a specified level of intensity. Although it's well-identified that earthquake uncertainties dominate the fragility characteristics
the influence of the characteristics of the earthquake on the fragility analysis is not well investigated. This study aims to compare the effect of earthquake characteristics on the fragility values of typical buildings in Australia. To achieve this
a typical reinforced concrete building is selected and modeled using a finite element approach. Various ground motion suites
such as near-fault
far-fault
and long-duration are selected
and the fragility analysis has been carried out for each ground motion suite. It is observed that the variation in the median values of the collapse fragilities can be as high as 48% between short-duration and long-duration ground motions
and about 40% between long-duration and pulse-like ground motions.
(7)
Publication Date
Sat Oct 01 2016
Journal Name
Journal Of Theoretical And Applied Information Technology
Factors affecting global virtual teams’ performance in software projects
Today the trend is to perform software development work via distributed geographical area among team
individual or even as an organization. However
due to the global market and international presence of many companies
there is a need to implement a global virtual teams. The global virtual team members are gradually engaged in globalized business environments across space
time and organizational boundaries via information and communication technologies. A global virtual team relies on communication
collaboration
and information exchange are the most important criteria in global virtual teams’ operations. The purpose of this paper is to answer two research questions. The first research question is to identify the factors affecting global virtual teams’ performance. A systematic literature review was conducted to answer the first research question. The second research question is on what the rank of the factor affecting the global virtual teams’ performance according to their level of effect on global virtual teams’ performance. Online survey was conducted within 103 developers and IT managers from eight IT companies to answer the second research question. The Statistical Package for Social Science (SPSS 22) was used to analyze the collected data. In this study
we investigated factors that affect global virtual teams’ performance
factors considered include cultural differences
language problems
time-zone differences
team size
technical problems
lack of trust
lack of sufficient training
and ICT problems. Also the findings indicated that lack of sufficient training is the highest level of effect on global virtual teams’ performance. On the other hand
team size is the lowest level of effect on global virtual teams’ performance. © 2005 - 2016 JATIT & LLS. All rights reserved.
(23)
Publication Date
Sun Jan 20 2019
Journal Name
Ibn Al-haitham Journal For Pure And Applied Sciences
Novel Co-Precipitation method for synthesis of Nanostructured Nickel Oxide in accordance to PH: Structural and Optical Properties as an Active optical filter
Low cost Co-Precipitation method was used for Preparation of novel nickel oxide (NiO) nano particle thin films with Simple
with two different PH values 6
12 and its effect on structural and optical properties as an active optical filter. Experimental results of structural properties X-ray diffraction (XRD) showed that both Nickel oxide nanoparticles with (PH=6 and 12) have polycrystalline structure smaller average particle size about 8.5 nm for PH=6 in comparison with PH=12. Morphological studies using Scanning electron microscopy (SEM) and atomic force microscope (AFM) show uniform nano rod distribution for PH=6 with smaller average diameter
average roughness as compared with NiO with PH=12 that showed larger diameter
grain size
spherical shape with scope of excellent sensing applications due to high roughness .Optical properties results Show blue shift for PH=6 as compared with PH=12m leading to potential of optoelectronic applications and as active optical Key words: Nickel Oxide
Co-precipitation method
PH
particle size
nanostructure.
Low cost Co-Precipitation method was used for Preparation of novel nickel oxide (NiO) nano particle thin films with Simple, with two different PH values 6, 12 and its effect on structural and optical properties as an active optical filter. Experimental results of structural properties X-ray diffraction (XRD) showed that both Nickel oxide nanoparticles with (PH=6 and 12) have polycrystalline structure smaller average particle size about 8.5 nm for PH=6 in comparison with PH=12. Morphological studies using Scanning electron microscopy (SEM) and atomic force microscope (AFM) show uniform nano rod distribution for PH=6 with smaller average diameter, average roughness as compared with NiO with
... Show More
(4)