In this paper, we studied the travelling wave solving for some models of Burger's equations. We used sine-cosine method to solution nonlinear equation and we used direct solution after getting travelling wave equation.

The concentrations of natural radionuclides in sediment samples from various locations along the stream of the Tigris riverbank in the Medical city in Bab Al- Muadham, Baghdad, had been examined using NaI(Tl) detector. The mean concentrations of specific activity for ²³⁸U, ²³²Th, ⁴⁰K and ¹³⁷Cs for sediments of the river was 13.5±4.6, 35.2±3.1, 272.2±21.4 and 1.5±0.35 Bq/kg  respectively. The findings revealed  that the concentration values of natural radionuclides and cesium were below permitted limits. The radiological hazard was compared with a global average (Radium equivalent, absorbed dose rate, radiation hazard index and annual effective dose equivalent) finding it was less

In this paper, thermal properties were performed by using semi-empirical theoretical calculations to study the molecular structure of a nonlinear molecular system, the (S₂F₂) molecule in the infrared region, by using semi-empirical quantum programs in the (MNDO / PM₃) method. This study is under the condition of obtaining the stable structure of the molecule in which the molecule obtains the minimum value of the total energy. The thermodynamic properties were also calculated, including the heat of formation, whose value was (-61.002kcal / mol),  the entropy and its value (78.2916 cal / mol.k), as well as the heat capacity  (15.9454 cal / mol.k) and the enthalpy (3763.434 cal /mol),  Gibbs F

In view of this work, plasma nitriding was executed on Ti-6Al-4V and the effect of nitriding by using glow discharge with 2 mbar of Ar+N₂ gas on corrosion resistance with different nitriding time and studied. The structure properties and the external appearance for alloys were performed with x-ray diffraction and optical microscopic. The investigation of XRD indicates the Ti alloys are polycrystalline with a cubic type (bcc). When the external appearance of the surface indicates was of β+α structure which have been better technical properties on biomedical application. The biocompatibility investigation of nitride alloys in vitro medium containing human body fluid: we showed a layer of hydroxyapatite HAP which might

     In this paper, we study a new concept of fuzzy sub-module, called  fuzzy socle semi-prime sub-module that is a generalization the concept of semi-prime fuzzy sub-module and fuzzy of approximately semi-prime sub-module in the ordinary sense.  This leads us to introduce level property which studies the relation between the ordinary and fuzzy sense of approximately semi-prime sub-module. Also, some of its characteristics and notions such as the intersection, image and external direct sum of fuzzy socle semi-prime sub-modules are introduced. Furthermore, the relation between the fuzzy socle semi-prime sub-module and other types of fuzzy sub-module presented.

The significance of the work is to introduce the new class of open sets, which is said Ǥ- -open set with some of properties. Then clarify how to calculate the boundary area for these sets using the upper and lower approximation and obtain the best accuracy.

In this paper, we used the maximum likelihood estimation method to find the estimation values ​​for survival and hazard rate functions of the Exponential Rayleigh distribution based on a sample of the real data for lung cancer and stomach cancer obtained from the Iraqi Ministry of Health and Environment, Department of Medical City, Tumor Teaching Hospital, depending on patients' diagnosis records and number of days the patient remains in the hospital until his death.

     In this paper, a solar concentrator is designed in the form of a concave half-cylindrical mirror consisting of polygonal reflective surface plates. The plates are arranged to give a hemispherical shape to the design. These surfaces work to receive solar radiation and focusing by reflecting it to the receiver that is placed in front of the reflecting surfaces. The results are compared with a system consisting of a concave reflecting surface of the same dimensions to obtain a good criterion for evaluating the design performance. The results showed a low acceptance angle for the design for all the samples used due to the geometrical design nature. The optical efficiency affected by the angle of incidence greatly by

   Excessive use of pesticides has led to increasing concern about undesirable effects on human health and the environment. Imidacloprid is an internationally used neonicotinoid insecticide due to its significant toxicity to insects. Its residues may reach the food chain, which is important for examining the potentially harmful properties of imidacloprid exposure. The current study aimed to characterize the histopathological effects of imidacloprid on the liver of male rabbits.

The Imidacloprid administration daily at the two chronic oral doses of (45 mg/kg and 90 mg/kg, daily) for 37 days. Treated male rabbits groups for treatment concentrations revealed many histopathological changes in the liver, such as congestion o

The method of solving volterra integral equation by using numerical solution is a simple operation but to require many memory space to compute and save the operation. The importance of this equation appeares new direction to solve the equation by using new methods to avoid obstacles. One of these methods employ neural network for obtaining the solution.

This paper presents a proposed method by using cascade-forward neural network to simulate volterra integral equations solutions. This method depends on training cascade-forward neural network by inputs which represent the mean of volterra integral equations solutions, the target of cascade-forward neural network is to get the desired output of this network. Cascade-forward neural

The numerical resolve nonlinear system of Volterra integral equation of the second kind (NLSVIEK2) has been considered. The exponential function is used as the base function of the collocation method to approximate the resolve of the problem. Arithmetic epitome are performed which have already been solved by weighted residual manner,  Taylor manner and block- by- block(2, 3, 5).

     We introduce and discuss the modern type of fibrewise topological spaces, namely fibrewise fuzzy topological spaces. Also, we introduce the concepts of fibrewise closed fuzzy topological spaces, fibrewise open fuzzy topological spaces, fibrewise locally sliceable fuzzy topological spaces and fibrewise locally sectionable fuzzy topological spaces. Furthermore, we state and prove several theorems concerning these concepts.

In this paper, Bayes estimators for the shape and scale parameters of Weibull distribution have been obtained using the generalized weighted loss function, based on Exponential priors. Lindley’s approximation has been used effectively in Bayesian estimation. Based on theMonte Carlo simulation method, those estimators are compared depending on the mean squared errors (MSE’s).

The derivation of 5^th order diagonal implicit type Runge Kutta methods (DITRKM5) for solving 3^rd special order ordinary differential equations (ODEs) is introduced in the present study. The DITRKM5 techniques are the name of the approach. This approach has three equivalent non-zero diagonal elements. To investigate the current study, a variety of tests for five various initial value problems (IVPs) with different step sizes h were implemented. Then, a comparison was made with the methods indicated in the other literature of the implicit RK techniques. The numerical techniques are elucidated as the qualification regarding the efficiency and number of function evaluations compared with another literature of the implic

      Let S be a commutative ring with identity, and A is an S-module. This paper introduced an important concept, namely strongly maximal submodule. Some properties and many results were proved as well as the behavior of that concept with its localization was studied and shown.

The idea of a homomorphism of a cubic set of a KU-semigroup is studied and the concept of the product between two cubic sets is defined. And then, a new cubic bipolar fuzzy set in this structure is discussed, and some important results are achieved. Also, the product of cubic subsets is discussed and some theorems are proved. 2010 AMS Classification: 06F35, 03G25, 08A72.

The land cover of Mahmudiyah city, located south of the capital, Baghdad - Iraq, was studied for the period from 1986 to 2021 with five years between every two successive scenes, where Landsat scenes were used downloaded from the US Geological Survey (USGS ) website with low cloud cover for sensors TM and OLI. The land cover of the study area was classified. The total accuracy of the classification was calculated, as well as the analysis of the user accuracy and the classifier accuracy (maximum likelihood) and its impact on the overall classification accuracy. The lowest accuracy value in 2009 was (85.101% (and the highest accuracy value in 1995) was 95.654%). The constancy percentage of the class for the adopted years was calculated and

Medicines comprising fosfomycin are prescribed for urinary tract infections. These drugs are available for oral use as tromethamine and calcium, while fosfomycin-sodium and disodium are given for intravenous (IV) and intramuscular (IM). Many quantitative analytical methods have been reported to estimate Fosfomycin in blood, urine, plasma, serum, and pharmaceutical dosage formulations. Some techniques were spectrophotometric, mass spectrometry, gas chromatography, high-performance liquid chromatography, and electrochemical methods. Here we perform a rapid narrative review that discusses and comparison between them of various analytical methods for the determination of Fosfomycin-containing drugs.

Sb-dopedAgInSe2 (AIS: 3%Sb)thin films were synthesized by thermal evaporation with a vacuum of 7*10^-6torr on glass with (400+20) nm thickness. X-ray diffraction was used to show that Sb atoms were successfully incorporated into the AgInSe2 lattice. Then the thin films are annealed in air at 573 K. XRD shows that thin films AIS pure, AIS: 3%Sb and annealing at 573 K are polycrystalline with tetragonal structure with preferential orientation (112).raise the crystallinity degree. The Absorption spectra revealed that the average Absorption was more than 60% at the wavelength range of 400–700 nm. UV/Visible measure shows the lowering in energy gap to 1.4 eV forAIS: 3%Sb at 573 Kt his energy gap making these samples suitable for p

Heart diseases are diverse, common, and dangerous diseases that affect the heart's function. They appear as a result of genetic factors or unhealthy practices. Furthermore, they are the leading cause of mortalities in the world. Cardiovascular diseases seriously concern the health and activity of the heart by narrowing the arteries and reducing the amount of blood received by the heart, which leads to high blood pressure and high cholesterol. In addition, healthcare workers and physicians need intelligent technologies that help them analyze and predict based on patients’ data for early detection of heart diseases to find the appropriate treatment for them because these diseases appear on the patient without pain or noticeable symptoms,

In this study, we prepared thin films of nickel oxide with a thickness of 150±10 nm using the pyrolysis spray technique, and their properties were studied for two hours at different annealing temperatures. including (as deposited, 723 and 873) K. Based on XRD measurements, the pattern data showed that (NiO) had an amorphous structure without annealing, but that a cubic polycrystalline structure with a preferred orientation (111), (200), and (220) was produced at a higher annealing temperature. In addition to other techniques, the crystal structure of the film was characterized using X-ray diffraction. The structure and physical characteristics of the NiO thin films are examined using methods based on atomic force microscopy and X-rays.

     This study focuses on the synthesis and characterization of a ternary nanocomposite comprising reduced graphene oxide (rGO), magnetite (Fe₃O₄), and manganese dioxide (MnO₂) nanoparticles (NPs). The aim of using it is to remove Terasil Black dye from water, particularly in textile industries. The nanocomposite was created using a co-precipitation method, followed by physical bonding with MnO₂ NPs. The structural properties, surface morphology, and elemental composition were evaluated through X-ray diffraction (XRD), Field Emission Scanning Electron Microscopy (FESEM), and energy-dispersive X-ray (EDX) analysis. The XRD results confirmed the presence of an amorphous phase along with dist

   This study examines wheat genotypes under combined and single drought and salinity stresses, assessing germination and seedling growth traits, as environmental issues like high salinity and drought significantly impact plant life..  The experiment was carried out to meet these goals. To identify the most and least tolerant genotypes, 16 genotypes were tested. Water potentials of 0. -0.5, -1.0, -1.5, and -2.0Mpa were used as treatments to create water stress by adding polyethylene glycol (PEG-6000) and sodium chloride together(D+S). After 15 days of putting seeds in Petri dishes, growth parameters were assessed, including germination percentage (%), speed of emergence (%), seedling vigour index, shoot length (cm), and fresh and drie

Marcescin is a bacteriocin that is extracted from isolates of Serratia marcescens, which is a gram-negative bacterium that belongs to the family Enterobacteraeaceae and is considered a nosocomial pathogenic bacteria. In this research, the toxic effect of crude marcescin extracted from the S. marcescens bacteria on the human laryngx epidermoid carcinoma (Hep-2) cell line was investigated. S. marcescens was isolated from blood, urine, and stool samples of patients from Nursing House Hospital, Baghdad Teaching Hospital, and Teaching Laboratories of Medical City by using a series of dilutions to concentrations of (0.00, 1.95, 3.9, 7.8, 15.62, 31.25, 62.5, 125, 250, 500, and 1000) µg/ml and an exposure time of (24

Neutrophils in saliva cause tissue death in inflammatory disorders, including periodontal disease. Identifying biomarkers for neutrophil mediators is crucial for accurate diagnosis in periodontics research. This study is to investigate the salivary levels of soluble cluster of differentiation 16b (sCD16b) and alpha defensin, which are biomarkers of neutrophil activation in patients with periodontal diseases, and to examine the correlation between these levels and clinical periodontal parameters. In this particular case-control study, a total of sixty subjects who were diagnosed with periodontal disease, including 30 with periodontitis and 30 with gingivitis, were recruited. These subjects ranged in age from 17 to 65 year

This study was conducted in the laboratories of the Department of Parasitology, Faculty of Veterinary Medicine, University of Baghdad, during the period from the beginning of February 2022 to the end of February 2023. Iraq is an endemic country with a high frequency of both types, visceral and cutaneous leishmaniasis, with several clinical manifestations. This study was designed to describe the histopathological alterations of skin infection and compare the hematological parameters between two groups of rabbits. In this study used two groups of rabbits one of which was experimentally infected with L. tropica. Leishmania tropica isolate was obtained from AL-Nahrain University, Biotechnol

The current study collected 157 clinical samples from Iraqi patients suffering from urinary tract infections at various Baghdad hospitals, including Medical City/Educational Laboratories, Baghdad Teaching Hospital, Imamin Al-Kadhimiya Hospital, and the Central Children's Hospital in Baghdad, from 27 November 2022 to 11 January 2023. We identified and tested the formation of biofilms, which led to the detection of two genes, algD and TspE4.C2. Vitek 2 confirmed the final diagnosis after a biochemical and microscopic examination of 11 selected E. coli isolates. The Congo red method has detected the bacterial vulnerability to form biofilms. he findings of this study showed that all selected bacterial isolates form

This study aimed to isolate and characterize fungus Aspergillus niger and treated by crude phenolic extract from Agaricus bisporus mushroom that contains a bioactive compound to treat fungi. Thirty samples were taken of suffered patients with otomycosis. Phenol extract was performed by HPLC technology, Molecular diagnosis of fungal isolation by PCR technique. Results show that the microscopic and culture examination on sabouraud dextrose agar medium showed that the fungal isolates A. niger had a percentage of (60%). The molecular diagnosis of fungal isolates using the polymerase chain reaction technique. HPLC showed being present of six biologically active substances in A. bisporus. Active substance (p

     This work includes the synthesis and characterization of new compounds that contain 5H-thiazolo[4,3-b][1,3,4] thiadiazol united in multiple steps, starting with the synthesis of the aldehyde compound [I] by reaction chloro ethyl acetate with 4-hydroxybenzaldehyde in the presence of ethanol and potassium carbonate, followed by reactions with thiosemicarbazide, mercapto acetic acid in sulphuric acid to produce compound [II] then reflux compound [II] with hydrazine hydrate to product compound [III], after that reaction the later compound with n-alkoxybenzaldehyde [IV]_n and a few drops of piperidine in THF as a solvent to produce new Schiff᾽s-bases compounds contain 5H-thiazolo [4,3-b] [1,3,4] thiadiazol unite [V]n, FTIR

Complex systems in the real world have networks differ significantly from random graphs and have non-trivial structures. In fact, they have a community structure that needs to be recognized and recovered. The stochastic block models (SBMs) are popular models for community detection in networks, where nodes are divided into groups based on their connectivity patterns. Maximum likelihood estimation is a common method for estimating the parameters of SBMs. In this paper, a model selection for stochastic block models is presented based on the optimization of the log-likelihood function to find the best number of communities K detected by the regularized convex modularity maximization method. This work deals with many assumptions on K because